sizing machine used for sale

X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible.

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.

Seven Pfaff industrial sewing machines are available. 1) 2 × Pfaff 1183 industrial sewing machines, one with drive and one without drive, stitch type: lockstitch 301, needle system: DBx1/134R, needle size: 60Nm-90Nm, max. stitch length: 4.5mm, max. sewing speed: 5500stitches/min, needle bar stroke: 32mm/36mm, presser foot clearance: 9mm-13mm, working space X/Y: 260mm/125mm, sewing head dimensions X/Y/Z: approx. 550mm/180mm/300mm, sewing head weight: approx. 30kg. 2) Pfaff 563 industrial sewing machine with drive, stitch type: lockstitch 301, max. sewing speed: 5500stitches/min, max. stitch length: 3.5mm/4.5mm, needle system: 134, needle size: 60Nm-100Nm, needle bar stroke: 33mm, balance wheel diameter: 65mm. 3) Pfaff 134 industrial sewing machine without drive, single-needle flatbed version with horizontal rotary hook, needle system: 134, working space X/Y: 295mm/140mm, max. sewing spee ...

MTE K-15 Bed Milling Machine Technical Specifications: Clamping Surface: 1,700 × 750 mm Spindle Speed: 40–3,000 rpm Tool Clamping Force: 1,500 daN Milling Feed Rate: 0–12,000 mm/min Positioning Feed Rate: 15 m/min Positioning Accuracy: < 0.012 mm Repeatability: < 0.007 mm Machine Weight with ATC: approx. 8,500 kg

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m The LC series is a machine system for the machining of spur and helical gears and cylindrical gear shafts and helical gears and cylindrical gear shafts, which is characterised by its special performance and versatility. Compared to other gear manufacturing processes, gear hobbing is characterised by its characterised by its high consistency of machining results over the entire tool life. Technical data of the machine: Basic specifications: --> Machining ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 € : 296.47 € : 40 mm : MK 4 : 300 mm : 1,5 / 3,0 kW : M30 : 610 mm : 850 mm : 1920 mm : 440 kg : 0 - 300 mm/U : 160 mm : 125 mm : 150 - 700 mm : 590 x 450 mm Display with the following functions: - Selection of operating mode: manual drilling / drilling with feed / tapping - Spindle speed - Feed rate - Zero point setting - Drilling depth - Piece counter - Chip breaking mode - Jump switch mode (for efficient drilling of square tubes) - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protecti ...

Centering machine for preparing axes to be machined on lathes such as Schaublin, Emco etc. The centering is automatic according to the diameter of the parts. Satisfactory condition, belt to be changed. Three-phase motor.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 € : 15 mm : B 16 : 214 mm : 40 - 4000 U/min : 0,54 kW : M10 : 355 mm : 485 mm : 1027 mm : 70 kg : 125 - 490 mm : 300 x 250 mm : 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton The ...

PET strapping green, smooth, 11 x 0.52 mm, 3,350 m/roll, roll diameter: 406/600 mm, tear force: 222 daN Remaining stock of 22 rolls on pallet available, original packaging, original Signode Tenax 1716

Pausch Compact CS 2000 with the following system components: Generator Editor Hfe 501_Baujahr 2010 Tube Siemens RAY-14S_1_Baujahr 2018 Vertical Tripod BS 66 Condition: used • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items ...

Vision Wide VF4000 portal milling machine for sale. 2-axis milling head (1 degree C-axis and 1 degree B-axis) with position determination Encoder SK50 VTEC VF4000 Dimensions X-axis 4200 Y-axis 2300 Z-Axis 1020 Tool magazine 40WZ Control Siemens 840D SL

3-spindle copy milling machine with stops for aluminium and plastic profiles Maximum spindle speed: 12,000 rpm Stop arms right and left Good condition

AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

GBK-420Automatic bread packing machine for whole loaves of bread

Key data: 1160 mm

Powerful vertical CNC lathe from HYUNDAI WIA Year of construction 2013 FANUC 32i Manual Guide Max. turning diameter 1,160 mm Max. swing diameter 1,355 mm Main spindle power up to 60 kW Max. torque 6,490 Nm C-axis with 0.001° resolution 12-speed BMT85P tool turret 12 powered tool stations Renishaw Q-Setter Hyundai WIA Tool Breakage Monitoring 20-bar coolant system Hinged belt chip conveyor 800 mm 3-jaw chuck Seoam CAS 32

Key data: 380 mm, 1019 mm

X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Good condition Weight: 400 kg

Key data: 380 mm, 1000 mm

Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation

Key data: 1640 mm, 3 mm

Max. bending length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via switches Manual backgauge with spring fingers Weight: approx. 1600 kg

Hartmann Automatic Slicer SL-25 - working condition very good,

Used dough dividing machine / head machine KÖNIG, type: Mini Rex 4000 TR-FS -in good condition- - Stamp size SK58 for small weights 30 - 80g - Stamp size AK70 for larger weights 75 - 140g - Capacity up to 4,000 pieces per hour - 2 rows - the machine has recently been serviced - Condition: good, ready for immediate use Visits and test runs are possible by arrangement. We will be happy to send you further information on request.

Used dough dividing machine / head machine KÖNIG, type: Mini Rex 4000 TR-AB -Refurbished in 2023- - Weight range up to 140 g per round-rolled dough piece - Capacity up to 4,000 pieces per hour - 2 rows - All wearing parts, such as bearings, antiebe, electrics and belts have been renewed - Condition: Very good, ready to use Visits and test runs are possible by arrangement. We will be happy to send you further information on request.

Mitutoyo Length Measurement Mod. KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the puller, including the air conditioning unit, Tip width: 630 mm, the machine has no tailstock and was specially used for forage work, max. grinding diameter: 280 mm, max. grinding wheel size: 400 x 40 x 127 mm, (none included), Speed of grinding spindle 2040 min-1, 6 speed levels of the tool spindle: 22.4 to 280 min-1, Drive motor 4 kW, Accuracy / Smallest part value: 0.001 mm, Taper in Riding and Tool Spindle Morse 4 Largest table length movement: 760 mm, Mass between tips 120 kg, Total power: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine Dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: correspond to production no.: 1989 - 1991 Swivelling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and autom ...

Wire EDM System GF AgieCharmilles CUT 2000 with loading robot (WorkPartner) General Information Machine type: CNC wire EDM machine with automation Model: CUT 2000 Automation: GF WorkPartner loading robot Control: Vision 5 (Windows XP) Generator: AGIE IPG-V high-performance generator Operating Hours Power On:  91,716 h Work On: 17,889 h Working Area / Travels X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm U/V Axes Travel: ±70 mm Workpiece Data Max. workpiece size (W × D × H): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (standard), 400 kg (optional / bath load) Working table: 700 × 450 mm Machining Parameters Taper: 30° at 100 mm workpiece height Available wire diameters: 0.10 – 0.30 mm Best achievable surface finish: Ra 0.05 µm Wire threading: automatic Dielectric System Dielectric capacity: 700 liters Flushing: coaxial flushing system Cooling: external cooling ...

: 0.4-5 mm Workingpiece thickness from to: 10-50 mm Total length: 2730 mm Feed speed: m/min. total power requirement: kw Weight: 720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-5 mm Workingpiece thickness from to: 6-45 mm Total length: 4130 mm Feed speed: 11 m/min. total power requirement: kw Weight: 1250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg Packing: ca. 10 Lademeter m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 420 mm gear width: 120 mm max. module: 7 mm min. module: 0,5 gear hobbing diameter - external: 420 mm gear hobbing diameter - internal: 370 mm table diameter: 400 mm boring diameter: 125 mm spindle stroke: 120 mm stroke position adjustment: 230 mm strokes - infinitely variable: 30 / 800 Hub/min depth feed stepless: 0,016 - 0,063 mm/Hub total power requirement: 35 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tape dimensions 150 x 2,260 mm Belt speed 17m/sec Connection 400V, 3~, 50 Hz, 2.5A, 1.5 kW Weight approx. 120 kg

Key data: 18 mm

The machine has three separate drilling spindles, which means that several holes or different machining steps can be carried out efficiently one after the other. It is therefore particularly suitable for use in industrial production, mechanical engineering, workshops and recurring drilling work. The machine is mounted on a stable work table and has a generous work surface. The integrated protective panels with viewing windows allow for a protected work area while providing a good view of the workpiece. Below the work surface there are additional storage and storage options. Design: 3-spindle in-line drilling machine 3 drilling spindles for efficient machining Robust, industrial construction Large integrated work surface Protective cladding with viewing windows Operation directly at the individual drill heads Integrated base with drawers/storage compartments Suitable for seri ...

Key data: 40 mm, 150 mm, 150 mm

Used and refurbished centerless cylindrical grinding machine Palmary PC-12-SPS, year of manufacture 2017, 2025 mechanical and electrically overhauled with new SIEMENS S7 control system. Including coolant with paper tape filter, various support rulers, Newly painted. The machine is in mint condition. The machine does not have a fixed center. Machine has a CE mark, spare parts and training can be done by the salesman. Current delivery time approx. 10 weeks Grinding wheel: 305x150 mm, regulating disc 205x150 mm, regulating disc speed 10-100 (250) mm, rotational speed the SS 33 m/sec, grinding spindle drive 5.5 kW, weight 1.65 to, space requirement approx. 2.05 x 1.2 m

max. format 26 x 38 cm Built in 1967 2 locking frames Inking unit not complete Delivery date: immediately from stock

Specification Injection Moulding Machine Demag System 1300/1500-11500 General data Clamping force: 1300 t Year of Make: 2008 Control: NC4 Total connected load: 189 kW Weight: 86,700 kg Dimensions (L x W x H): 8.09 x 3.41 x 2.99 m + 6.25 x 2.58 x 2.99 m Clamping unit Size of the clamping plates: 2150 x 1880 mm Lights spar spacing: 1500 x 1250 mm Tool installation height: 700 - 1400 mm Opening travel: 1500 mm Max. panel spacing: 2900 mm Ejector force: 233 kN Ejector travel: 350 mm Injection Unit 11500 Screw diameter: 110 mm Spray volume: 5797 cc Injection weight in hp: 5200 g Spec. Spray pressure: 1971 bar L/D Screw Ratio: 24 Hydr. Drive power: 110 kW Cylinder heating capacity: 79.1 kW Facilities Hydraulic core pull: 4 Hydraulic cascades: 12 Hot runner control points (zones): 32 Robot Wittmann DR 853, built in 2014 (Z 3,500 / Y 2,500 / X 1,600 mm, C-axis ...

Specification Injection Moulding Machine Demag Ergotech 650/1000-3300 General data Clamping force: 650 t Year of Make: 2005 Control: NC4 Clamping unit Size of the clamping plates: 1450 x 1350 mm Clearance spar spacing: 1000 x 900 mm Tool installation height: 450 - 950 mm Opening travel: 930 mm Max. plate spacing: 1880 mm Ejector force: 96 kN Ejector travel: 300 mm Injection Unit 3300 Screw diameter: 80 mm Injection volume: 1779 ccm Injection weight in hp: 1600 g Spec. Spray pressure: 1855 bar L/D Screw Ratio: 20 Facilities Hydraulic core pull: 4 Hydraulic cascades: 8 Hot runner control points (zones): 16 Robot Wittmann W 843 Pro, built in 2021 (Z 3,000 / Y 2,000 / X 1,200 mm, C-axis servo 180°, B-axis servo 270°) included in the scope of delivery

Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication Instruction manual

Year of construction 1998 Staple Stitching Machine 2 staple heads electr. Drive electr. Footswitch Delivery date: immediately from stock

Specification Injection Molding Machine Demag Systec Servo 420/820-2300 General data Clamping force: 420 t Year of Make: 2015 Control: NC5 Total connected load: 78 kW Weight: 21,000 kg Dimensions (L x W x H): 8.02 x 2.21 x 2.57 m Clamping unit Size of the clamping plates: 1200 x 1200 mm Clearance spar spacing: 820 x 820 mm Tool installation height: 380 - 825 mm Opening travel: 770 mm Max. plate spacing: 1595 mm Ejector force: 96 kN Ejector travel: 230 mm Injection Unit 2300 Screw diameter: 70 mm Spray volume: 1212 ccm Injection weight in hp: 1,100 g Spec. Spray pressure: 1877 bar L/D Screw Ratio: 20 Hydr. Drive power: 51 kW Cylinder heating capacity: 27 kW Facilities Hydraulic core pull: 4 (+ 2 additional connections on the hard drive) Hydraulic cascades: 4 Hot runner control points (zones): 40 Servo-hydraulic pump drive activeDrive (energy-saving) In ...

Width 66 cm Year of manufacture 1989 Flat pile feeder TREMAT Counting device EVZ 30 1st station: 6 fold pockets 66 cm 2nd station: 4 fold pockets 56 cm 3rd station: 2 fold pockets 56 cm Standing sheet delivery SBP 46 Delivery date: immediately

For sale is a professional frame strapping machine TITAN VK10-F from the renowned TITAN Umreifungstechnik GmbH. The machine is ideal for fast and safe strapping of cardboard boxes, parcels or wooden articles in the shipping and logistics sector. Technical data: Manufacturer: TITAN Umreifungstechnik GmbH Model: VK10-F (unit VK 10 F) Year of Make: 2004 Machine No.: 60689 Power connection: 400 V / 50 Hz (high voltage, CEE plug) Control voltage: 24 V Rated current: 2.5 A Equipment: Integrated roller table for easy handling of packages Large pass-through frame Triggering optionally via control panel on the frame or external foot switch (steute) Belt drain coil installed under the table Mobile frame on swivel castors (with parking brake) Condition: Solid, used condition from industrial operation (see pictures).

Key data: 440 mm, 363 mm

Manufacturer: Mori Seiki Model No.: CL2000B Year: 2014 Condition: Used Stock number: 9456 Control system: MORI SEIKI M65V Switch-on hours: 61927 h Hours: 25326 h Maximum turning length: 363 mm Max. turning diameter: 440 mm Weight: 2800 kg

Bystronic Byspeed 3015 Bylaser 5200 ARC Control: ByVision Suction Donaldson Car Charge-Discharge System Auction-ID: A7-32339-2

We offer this used Stock Maschinenbau SFAM 2020 Fassonglubemaschine, built in 2004. The associated press belt is built in 2010, the Meler hot melt machine is built in 2022. The working width for hot and cold glue is approx. 2100mm! Type: SFAM 2020 Machine No.: 20041227 If you have any questions or need more information, please feel free to send us a message or give us a call.

Manufacturer: Barsanti Type of machine: Tile cutting line - Slab material: Marble and Granite - Slab length max: 3500mm - Slab width max: 2100mm - Slab thickness max: 50mm - Tile size min: 300mm x 300mm - Tile size max: To slab size - Tile thickness max: 50mm - Production capacity: Approx. 1 slab per minute - Cutting method: Cut slabs in one pass or strip by strip - Overall length of line: 36m - Main components and their function - Automatic Slab Loader: loads slabs into the line - Feed conveyor 1: conveys slabs into the line - Pedestrian Bridge 1: walkway across the line - Feed conveyor 2: conveys slabs toward the long cut saw - Long cut belt conveyor: conveys slabs through the long cut process - Long cut bridge saw: 7 blades with electronic positioning, performs the long cut - Side waste breaker: breaks off side waste material - Side waste conveyor: conveys away side waste material - ...

This 6-axis DÖRRIES SCHARMANN Heavycut 1.2 TDV4 was manufactured in 1989. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 2,500 mm with a maximum table load capacity of 25,000 kg. If you are looking to get high-quality boring capabilities, consider the DÖRRIES SCHARMANN Heavycut 1.2 TDV4 boring machine we have for sale. Contact us for further details.

Reference Num.: 4466 Brand: Heidelberg Type: SM 52-2 Construction year: 1998 Impressions: 63 mio Size: 370 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 145 mm, max 370 x 520 mm Printing speed: max 15,000 sheets/hour Printing units: 2 Paper thickness: 21.06 mm Machine size: Length: 2,860 mm, Width: 1,850 mm, Height: 1,620 mm Total weight: kg 4,600 / lbs 10,141 Equipment: - CPTronic - Autoplate - Alcolor - Nummerier- und Eindruckeinrichtung

A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible.

Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, yea ...

Lagun X: 3000 - Y: 1000 - Z: 1200 mm CNC Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1200 mm Dimensions clamping space- table: 3100 x 800 mm Power on spindle: 22 kW Type of millinghead: BT-50 Max speedrange: 50 > 3000 rpm (840 Nm) Control: Heidenhain iTNC 530 Power needed (KVA): 35 kW Length : 8744 mm Depth: 3765 mm Height: 3352 mm Weight: 14 ton

REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA