sizing machine used for sale

x-travel: 2400 mm y-travel: 1500 mm z-travel: 810 mm Control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: 7.8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tie bar expansion nut for die casting machine IDRA1800, TR260x9, 446808, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Tie bar expansion nut, Tr260x9, D465x300mm high. Approx. 300kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date ...

Adjusting nut for die-casting machine OL2000, pull out, TR285x10, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjusting nut for die-casting machine OL1500, pull out, TR250x12, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmdehnmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjustment nut for die casting machine IDRA OL1800, pullable, TR260x9, 170359, Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, Adjuster nut, pullable, Tr260x9, D390/338x300mm high. Approx. 115kg for die casting machine IDRA OL1800/1750 The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D370, D330, D300 6 months warranty We give you a 6-month warranty for these goods f ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 990542, Idra, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 141384, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x345mm high. Approx. 255kg for die casting machine IDRA OL1800/1750 With bronze contact rings on both sides, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 151913, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In  ...

Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.

Offered for sale is an MR Wickeltechnik core cutting machine. Max. uncut core length: 2000mm, min./max. core inner diameter: 76.2mm/152.4mm, max. core outer diameter: 210mm, core wall thickness range: 3mm-18mm, automatic cutting width range: 8mm-600mm, manual cutting width: 2930mm, cutting tolerance: +/-0.2mm, max. core speed: 427rpm, max. feed speed: 200mm/s, cutting capacity: 18cuts/min at 76mm core inner diameter, 7mm wall thickness and 50mm cutting length, control: Siemens Simatic. Machine weight: 700kg. Equipped with fully automatic cutting cycle, manual core feeding, automatic core length detection by means of a photoelectric sensor. Documentation available. An on-site inspection is possible.

grinding diameter: 500 mm grinding length: 1000 mm centre height: 250 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5 Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 € : 530.98 € : 3030 mm : 4 mm : 4 mm : 2 mm : 180 mm : 4 kW : 4600 mm : 1120 mm : 1020 mm : 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 € : 918.71 € : 2550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4900 mm : 1150 mm : 1250 mm : 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 € : 884.33 € : 2050 mm : 11 mm : 11 mm : 9 mm : 9 mm : 7 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 € : 1650.92 € : 540 mm : 1500 mm : 85 mm : 310 mm : 350 mm : D1-8 : 1/20 MK : 3 : 27 - 2250 1/min : 5000 mm/min : 8000 mm/min : 280 mm : 75 mm : 5 MK : 190 mm : 9 / 13,5 (S1 / S6 40%) kW : 0.02 mm : 0.016 mm : ISO3655 : 3340 mm : 1905 mm : 2235 mm : 3400 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 € : 138.19 € : 30 mm : MK 3 : 250 mm : 245 - 4000 U/min : M25 : 400 mm : 655 mm : 1185 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2200 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 95000 € : 1795.5 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 € : 1583.82 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 € : 996.03 € : 2550 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1470 mm : 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 € : 1948.59 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 € : 1863.54 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 € : 3038.89 € : 3 kW : - : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 26,5 kW : 250 mm : 16 mm : 160 x 160 mm : 200 x 150 mm : 6000 mm : 58 kg/m : +/- 0,2 mm : +/- 0,05 mm : rund, quadratisch, rechte : 40 m/min : 94 m/min : 30 m/min : 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request The data for this ad was cr ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36300 € : 693.33 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 € : 952.75 € : 35 mm : MK 4 : 390 mm : 94- 2.225 (16) 50 Hz 113 U/min : M35 : 1660 mm : 1510 mm : 2600 mm : 910 kg : 180 mm : 190 - 650 mm : 1310 mm : 125 mm : 400 x 420 mm : 0,10 - 0,18 - 0,24 (3) mm/min : 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 € : 428.16 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 € : 420.48 € : 80 to : 285 mm : 300x25 mm : 750x1425 mm : 300 mm : 105 mm : 10 mm/s : 10 mm/s : 10 kW : 930 mm : 1430 mm : 750 mm : 1450 mm : 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247940 € : 2100 mm : 850 mm : 2000 x 600 mm : 2x 1000 x 600 mm : 0 - 20 m/min : 0 - 5000 mm/min : 0,001 mm : 685 mm : 0 - 2000 mm/min : 0.001 mm : 675 mm : 500 - 2200 1/min : 11 kW : 7710 mm : 3320 mm : 2850 mm : 6530x3200x3350 mm brutto mm : 10200 kg : 900 mm : 1240 kg : 2000 kg : 405 x 50 x 127 mm : 3,1 / 3,1 kW : 7.5 kW : X: 0,008, Y/Z: 0,005 mm : X: 0,006, Y/Z: 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitud ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 77850 € : 1471.37 € : 460 mm : 1000 mm : 56 mm : 230 mm : 350 mm : D1-6 : 1/20 MK : 3 : 33 - 3100 1/min : 5000 mm/min : 8000 mm/min : 280 mm : 75 mm : 5 MK : 190 mm : 9 / 13,5 (S1 / S6-40%) kW : 0.02 mm : 0.01 mm : ISO3655 : 2840 mm : 1905 mm : 2235 mm : 2900 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software With precision bearings ensuring spindle runout of less than 0.005 mm, for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis. 2-axis ...

: neu : 2026 : 090237 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 € : 305.28 € : 50 - 60 mm : 180 mm : 180 mm : 180 mm : 3 : 3.75 kW : 6 m/min : 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm : 850 mm : 1200 mm : 955 kg 3 mech. driven rolls (brake motor) hardened shafts lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech ...

: neu : ca. 2 Wochen ab Auftragse : 880.52 € : 150 mm : 40 mm : 200 mm : 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 € : 10 mm : B 16 : 180 mm : 250 - 3000 U/min : 0,45 kW : 400 mm : 248 mm : 460 mm : 30 kg : 50 mm : 105 - 245 mm : 300 x 200 mm : 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 € : 12 mm : 19 mm Weldon : 0.1 kW : 175 mm : 250 mm : 312 mm : 10 kg : 12 mm : 36 mm : 51 mm : 70 mm : 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features &, benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magn ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : 350 mm : 300 mm : 500x160 mm : 350x150 mm : 300x150x55 mm : 2800 1/min : 3,6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg : Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to m ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 € : 144.75 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum workpiece outer diameter: 3420 mm Minimum workpiece inner diameter: 630 mm max. module: 30 mm control: Siemens Sinumerik 840 D Workpiece tooth width - max.: 600 mm tip circle diameter: 440 mm Milling arbour diameter: 80 mm x-travel: 1110 mm y-travel: 1300 mm spindle turning speed - stepless: 18 - 180 U/min rotary table speeds infinitely variable: 0 - 6 U/min Ring stength: 500 mm total connected load: 100 kVA weight of the machine ca.: 38 t dimensions of the machine ca.: 8,41 x 9,05 x 5,19 m Feed rate: - X-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min - Tool 18 to 180 - Workpiece table 0 to 6 Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation The data for this ad was created with ModulMWS - the software sol ...

grinding length: 600 mm grinding width: max. 320 mm workpiece height: max. 500 mm magnetic clamping plate: 300 x 605 mm horiz. table movement: longitudinal: man. max. 750 mm horizontal table movement: cross: max 340 mm sanding disc diameter: 355 mm table load: max. 420 kg grinding wheel width: 50 mm bore: 127 mm spindle turning speed range: 1500 U/min rapid traverse vertical: 400 mm/min Control: weight of the machine ca.: 2500 kg dimensions of the machine ca.: ca. 2800x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Gildemeister CT 60 BJ 1990

Lathe Gildemeister NEF 320 K BJ 2002

Technical Parameters Category: Used butchering machines Subcategory Hygiene, Packaging & Transport Type of packer Height 1770 mm Width 960 mm Length 2320 mm Electrical Supply: 400V 50Hz 3N Total power 11 kW Main Material Stainless Steel, Acid Resistant Thermoforma Packaging System Description Film width: 420 mm, Mold dimensions: 180 mm x 180 mm, Busch vacuum pump, capacity: 63 m³/h,

Sumbel Herold 800 banding machine; Condition new and unused; Working width 800mm; suitable for cold glue; Speed adjustable. Gluing machine Sumbel Herold 800; conditioin new never used; working width 800; used for cold glue; adjustable in speed.

DECKEL S 1 K ist eine Werkzeugschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Maße: Spitzenhöhe 95 mm; Spitzenweite 250 mm; Tisch 450×175 mm; max. Ø 130 mm; Verfahrwege L260×Q50×V50 mm; Tisch 360°, Kopf 360°/220°. Daten: Spindel 2 Stufen 3.750–7.500 t/min; 50 Hz 3×380 V; Motor 0,50 CV; Leistung 1 CV; Gewicht 450 kg; Abm. 1000×600×1400 mm. Zubehör: Teilapparat, Reitstock, Schraubstock (Backen 80 mm). Erreicht enge Toleranzen; Branchen: Automotive, Uhren, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

SIXIS S 103 R ist eine Universalfräsmaschine für hochpräzise Bearbeitungen, große Genauigkeit und Zuverlässigkeit. Tisch 600x300 mm; Wege X450 Y170 Z410 mm; Abstand Spindel–Tisch 320 mm. Spindel ISO30, 18 Stufen 60–2400 t/min; 8 Vorschübe (L 12–216 mm/min, Z 6–108 mm/min); Eilgang L1,0 m/min, Z0,5 m/min. Anschluss 3x380 V 50 Hz; Motor 1,5 CV; Gesamtleistung 2 CV; Gewicht ~800 kg. Zubehör: Kühlung, Gegenhalter, starre Tischplatte. Erreicht enge Toleranzen; geeignet für Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr