sizing machine used for sale

: neu : ca. 6 Monate ab Auftragse : Taiwan : 156920 € : 2965.79 € : 1200 mm : 850 mm : 1200 x 500 mm : 1200 mm : 1200 500 mm : 5 - 30 m/min : 0 - 5000 mm/min : 0,001 mm : 560 mm : 0 - 2000 mm/min : 0.001 mm : 500 - 2200 1/min : 11 kW : 3.7 kW : 3.1 kW : 2.4 kW : 4600 mm : 2950 mm : 2745 mm : 4610 x 2290 x 2500 mm : 6400 kg : 900 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, checkout 7) Air purge spindle Longitudinal guides with double V  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 € : 12 mm : 19 mm Weldon : 0.45 kW : 316 mm : 235 mm : 328 mm : 115 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 122570 € : 2316.57 € : 600 mm : 500 mm : 600 mm : 325 mm : 600 mm : 205 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 2850 x 2000 x 2470 mm : 3500 kg : 820 mm : Dm. 355 x 38 x Dm. 127 mm : 0,001 mm : 1.7 kW : 2.4 kW : 10 - 150 1/min : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-600S with Sma ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 € : 18 mm : MK 2 : 240 mm : 30 - 3000 U/min : M12 : 355 mm : 705 mm : 1065 mm : 170 kg : 100 mm : 155 - 415 mm : 155 - 550 mm : 340 x 280 mm : 82 mm Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice &, keyless chuck) The data for this ad wa ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser cutting machine Trumpf Trumatic L 4030

Fully Refurbished Manufacturer: Emsens France Warranty, samples and training in the price. 1 year warranty

Key data: 6020 mm, 1 mm

with motorized scissors, with CNC depth stop, with 4-stop finger (tilt-turn finger), with 5 stand units, the machine is located in good and well-maintained condition Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Back gauge (max.) 1000 mm Color: Blue Total power requirement 16 A Dimensions 6900 x 1580 x 1870 mm Weight 3000 kg Upper beam stroke (opening width) 200 mm Sheet thickness adjustment yes, manual Bending angle (max) 140 degrees Roller shears yes, motorized Number of stands 5 pieces Machine number 9538-10

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

Zum Verkauf stehen professionelle Bäckereischneidemaschinen vom Typ SCHICKART 30 PLUS. Wir bieten 2 Stück robuste, industrielle Schneidemaschinen aus Edelstahl an. Die Geräte sind für das schnelle und präzise Schneiden von Backwaren konzipiert – geeignet für Bäckereien, Konditoreien, Geschäfte, die Gastronomie sowie die Lebensmittelproduktion. Die wichtigsten Informationen: Hersteller: SCHICKART Modell: 30 PLUS Anzahl: 2 Stück Ausführung: Edelstahl robuste industrielle Bauweise Einstellmöglichkeiten und Arbeitselemente zur Anpassung des Gerätebetriebs ausgestattet mit einer Auffangschale Gebrauchtgeräte, sichtbare Gebrauchsspuren optischer Zustand wie auf den Fotos

Measuring range width/ length/ height 1600/ 1800/ 1000 mm Dimensions Width/ Length/ Height 2450/ 2940/ 3800 mm max. workpiece weight 3500 kg Measuring machine weight 8500 kg Creep speed 0 - 5 mm/s Setup operation 0 - 70 mm/s Series measurement operation Axis max. 300 mm/s Vector max. 425 mm/s Software version Calybso 2023/ Service Pack 2 --- version 7.6.08 Various probes Transducer

We sell a well-preserved and fully functional spraying machine with a Siemens S5 control system.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 € : 2623.32 € : 1020 mm : 2000 mm : 510 mm : 358 mm : 770 mm : 560 mm : 361 MK : 12 : 6,3 - 315 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 505 mm : 270 mm : 105 mm : 6 MK : 225 mm : 18.5 kW : 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amest ...

Key data: 2000 mm, 1000 mm

max. grinding length 2000 mm max. sanding width 1000 mm max. working height for new disc 600 mm max. workpiece weight 3200 kg max. table load 4500 kg Clamping area 2860 x 1000 mm Grinding spindle drive 26 KW Spindle speeds 1000 - 3000 1/min Transverse movement feed 1 - 5000 mm/min Vertical feed rate 1 - 5000 mm/min Minimum programming value 0.001 Recooling unit Mechanical suction Paper Belt Filter Machine Grinding wheel balancing electronics Pneumatic folding dresser Control ABAMATIC 1 N.D.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 34710 € : 662.96 € : 457 mm : 450 mm : 457 x 203 mm : 450 x 200 mm : 500 mm : 530 mm : 5 - 25 m/min : 960 mm/min : 0,4 - 6 mm : 230 mm : - mm : 2850 1/min : 1,5 kW : 0.75 kW : 0.04 kW : 3,7 kW : 2200 mm : 1575 mm : 1950 mm : 1320 kg : 215 kg : 250 kg : 203 x 12,7 x 31,75 mm manual vertical feed grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment 34 lt with magnetic separator and dust exhaust manual dresser with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 300 mm grinding length: 1000 mm centre height: 150 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5 x 3 x 2,2 m No. 4959 Universal cylindrical grinding machine STÖCKEL RSU 100 NC-T Working area: approx. Ø 300 x 1000 Drive: 4/1 kW Electronic handwheel Internal grinding device Coolant device with magnetic separator documentation External grinding spindle Wheel Ø 400 x 50 / 250 x 30 mm 4 kW / max. 1400 mi-1 Internal grinding spindle 1 kW / max. 1400 min-1 Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90° Space requirement approx. 5 x 3 x 2.2 m Transport dimensions approx. 6LM Weight approx. 5.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m No. 2392 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 mm Drive: 3 kW Control: TNC 135 With manual control: Working area 520 x 450 x 410 mm, fixed table 800 x 400 mm Tool holder SK 40 18 spindle speeds from 40 - 2000 1/min Feed stepless x,y 4 - 1600 mm/min z 4 - 1000 mm/min Dimensions 2.3 x 2.3 x 1.7 m Weight 1350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 450 mm z-travel: 500 mm Control: CNC 332 / TNC 355 total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: ca. 3 x 3 x 2,5 m No. 2213 Universal tool milling machine MAHO MH 800 T Working area: 800 x 450 x 500 (800 longitudinal / 450 vertical / 500 transverse) Drive: 5.5 kW Control: Heidenhain CNC 332 / TNC 355 Universal built-in rotary table Coolant device Chip tray Splash guard half cabin, tool clamp Technical documentation Tool holder ISO 40, Table clamping surface 600 x 900 m, max. table load 500 kg, quill stroke 80 mm Speed range 63 - 3150 rpm Feed rate 1 - 1500 mm/min Rapid traverse: 4.5 m/min Weight: approx. 4 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 400 mm z-travel: 370 mm Control: Retrofit Dialog 11 - 7.07 table surface area: 1400 555 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 332,2 m Packing: 3 m Retrofit by FPS Alternate NC - Rotary Table available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 3 kW weight of the machine ca.: je 2,5 t dimensions of the machine ca.: je 332,5 m Bundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 80 ( 100 ) mm turning speeds: 20 - 1400 U/min spindle taper MT: 6 : Rechts- + Linkslauf quill stroke: 400 mm feed range - spindle: 0,045 - 1,5 mm/U arm length: 1600 mm workpiece height max.: 400 - 1800 mm base plate surface area: 1170 2185 mm accessories:: 2x Würfeltisch+Kühlmittel automatic clamping device electr.: Elektro - Mechanisch total power requirement: 14 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 1,5 x 3,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

balancing body min/max.: 0,1 - 1 kg balancing body diameter w/o machining unit: 300 mm balancing body diameter with machining unit: - total power requirement: 0,7 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 10,61,2 m No. 0304 Vertical balancing machine SCHENCK Z 35 E Working range: max. test piece 300 Control: Test piece weight 100 g - 1 kg Drive: .7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 3 / 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 1/4 bis 3 / 75 mm threading length: ? mm thread pitch: ? mm turning speeds: 33 U/min total power requirement: 1 kW voltage: 230 V weight of the machine ca.: 0,074 t dimensions of the machine ca.: 1,20,81 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: - mm y-travel: - mm z-travel: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 5200 mm grinding width: 1300 mm workpiece height: 320 mm Control: Siemens 840 D main drive: 306 kW total power requirement: 380 kW weight of the machine ca.: t dimensions of the machine ca.: 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grindin ...

x-travel: 290/300 mm y-travel: 150/160 mm z-travel: 330/340 mm total power requirement: kW weight of the machine ca.: 675 kg dimensions of the machine ca.: 2700 x 2500 mm The machine was overhauled by the company Harich in 2017. Machine number: 57330/08 Technical data: Table longitudinal movement (motorized/manual): 290/300 mm Spindle head transverse movement (motorized/manual): 150/160 mm Support vertical movement (motorized/manual): 330/340 mm Angle table clamping surface: 600 x 210 mm Spindle speeds: 40 – 2000 rpm Tool holder: Standard taper 40 Motor power: 1.5/1.9 kW Feed rate range (infinitely variable): 5 – 500 mm/min Rapid traverse: 1200 mm Equipment: 3-axis digital readout (Heidenhain) Vertical milling spindle with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Operating manual The machine will be loaded onto a Euro-pallet, total height: ...

x-travel: 4000 mm y-travel: 1350 mm z-travel: (Vert.) 1600 mm Control: Heidenhain iTNC 530 table surface area: 4200 x 1150 mm table load: 13 t tool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/min transmission ratio: 2 spindle motor: 28/38 kW feed range: 5000 mm/min rapid traverse: (X/Y) 12 m/min rapid traverse: (Z) 10 m/min weight of the machine ca.: 37 t dimensions of the machine ca.: 12,9 x 6,53 x 3,79 m In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. CNC-control HEIDENHAIN iTNC 530 Electronic handwheel 50-position tool changer Controlled universal milling head, indexable 2.5 / 2.5 deg. Coolant device Cooling through the spindle 2 chip convey ...

x-travel: 2500 mm y-travel: 1300 mm z-travel: 900 mm Control: Heidenhain iTNC 530 table surface area: 2500 x 800 mm table load: 5,0 t tool taper: SK 50 DIN69871 spindle turning speed range: 36 - 4000 U/min feed range: 2 - 12000 mm/min main drive: 25 kW total power requirement: 50 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) m The main engine was overhauled in September 2022 for € 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle drive (Siemens) Retention of the control cabinet and feed drives Geometric overhaul of the machine Overhaul of the tool changer Defective guideway covers were repaired or replaced The milling head was completely overhauled approx. 3 years ago. Equipment: CNC control Heidenhain iTNC 530 Horizontal/vertical swivell ...

turning diameter: 475 mm turning length: 830 mm control: HEIDENHAIN MANUALplus 620 swing diameter over slide rest: 260 mm centre distance: 1000 mm spindle bore: 70 mm spindle turning speed range: 1 - 3000 U/min feeds - cross: 0,001 - 1000 mm/U feeds - longitudinal: 0,001 - 2000 mm/U rapid travel - longitudinal/face: 10 / 5 m/min tailstock quill diameter: 70 mm tailstock quill stroke: 120 mm tailstock quill taper MT: 5 main drive: (40 % ED) 25 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: m Control HEIDENHAIN MANUALplus 620 DXF conversion software (processing of contours in DXF format from CAD drawings) Ethernet and USB interfaces inside the control cabinet Coolant system (frequency-controlled), 1–4 bar Glass scale for direct position measurement on the X and Z axes 4-position PARAT quick-change tool holder, size 2, with several inserts 3-jaw-chuck RÖHM ZS 2 ...

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mm segment head diameter: 1400 mm grinding motor turning speeds up to: 320 U/min. grinding motor: 306 kW weight of the machine ca.: 50,0 t dimensions of the machine ca.: m Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. Dresser ...

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece  ...

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 440 mm engine output: 55 kW total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Bending speeds, slow and fast Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the control panel Central rolls (top and bottom rolls) driven by hydraulic motors and planetary gear reducers Electro – hydraulic calibration OPTIONAL FEATURES AND ACCESSORIES: Center support: 21.468,75 € Side supports  ...

x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: 83,2 t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Work ...

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm tool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/min feeds: 0 - 10.000 mm/min quill stroke: 90.0 mm table-size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control: TNC 410 CA spindle: ein ~ 126 Std. engine output: 11.0 kW weight: 1300 kg dimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ...

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm : 0 - 180 ° : 2 (60.,3mm) mm : stufenlos 0,5 - 2,0 : 1,5 kW : 700 kg - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 205 mm side roll diameter: ~ 195 mm Control: konv. oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 3200 kg range L-W-H: 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch u ...

plate thickness: 6.0 mm ST thickness at Niro-steel: 4.0 mm plate thickness: 8.0 mm ALU angle adjustable from - to: 30 - 140 Grad table:: 950 x 890 mm blade length: 220 x 220 mm stroke: 35 H/min work height max.: 1150 mm total power requirement: 3.0 kW weight: 800 kg range L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adj ...

sheet width: 1270 mm plate thickness: 1.75 mm ST plate thickness: 2.00 mm ALU plate thickness: 2.50 mm KU thickness at Niro-steel: 0.80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60.0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13,0 mm pre-bending: 10,0 mm diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.