sizing machine used for sale

Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.

Warco WM40 turret mill with 2 axis DRO and with a third DRO retro fitted to the knee (Z axis). The X axis has powered feed and the knee has powered height adjustment.

A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.

A Signode plastic strapping machine is available. Load capacity: 35kg, arch dimensions X/Y: 1550mm/500mm, min. package width: 100mm, min. package height: 20mm, strap tension range: 40N-450N, strap quality: PP, strap width: 9mm/12mm, strap thickness range: 0.4mm-0.6mm, strap reel core diameter: 200mm, strap reel outer diameter: 430mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible.

Slotting Machine - Vertical VS 600 -Rotary table - diameter 600mm -Lifting range approx. 360mm -Three-jaw chuck - diameter 325mm -Good general condition Dimensions: LxWxH 1.9x1.2x2.2 meters / Weight approx. 1700Kg

used spiral mixer Kemper ST 75 A extendable, overhauled, for 75 kg flour, 2 clocks, with 1 stainless steel boiler, if necessary with 1 additional boiler for an additional 3,500€, stainless steel spiral, electrics renewed, repainted, new bearings, new V-belts, Model-No. 6722781, 25 A, 380 V

INDUMASCH SIEGEN Notching Machine Table dimensions: 1000 x 800 mm Dimensions: LxWxH 1.2x1.1x1.4 meters / Weight 500Kg

This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information.

This Waterjet Italy WL510 was manufactured in 2022. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information.

Horizontal turning machine manufactured in 2014. This BUFFALO Microturn BNC 446 features a maximum turning diameter of 250 mm and a turning length of 750 mm. It includes a tool turret with 8 stations and a spindle bore of 54 mm. If you are looking to get high-quality turning capabilities, consider the BUFFALO Microturn BNC 446 machine we have for sale. Contact us for further details.

Shrink packer Kettner with oven Stereung Siemens S7 Available immediately

This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details.

Shrink packer Kettner with oven Stereung Siemens S7 Available immediately

CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine.

Milling machine Mikron VCP 800 BJ 2000

This 4-axis ESAB Combirex CXD P 3500 was manufactured in 1997. It features a cutting current of 100 A and is capable of handling a maximum recommended cutting thickness of 31.8 mm for mild steel and stainless steel, and 25.4 mm for aluminum. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex CXD P 3500 machine we have for sale. Contact us for further details.

Techmatik Splitting Machine for Concrete Products Techmatik Splitting machine for concrete products

This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details.

CNC shearing machine manufactured in 2009. This Baykal HNC 3100x13 features a cutting capacity of 13 mm and a cutting length of 3,060 mm. It is equipped with a powerful 30 kW motor and operates at a working pressure of 260 bar. If you are looking to get high-quality shearing capabilities, consider the Baykal HNC 3100x13 machine we have for sale. Contact us for further details.

Blow Molding Machine Krupp Model Blowmax 20 20 Cavities Capacity approx. 35,000 W/H Construction year 2007

This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4 LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine.

This 5-axis SACHMAN TS10 bed type milling machine is manufactured in 2026 and brand new. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details.

Straight-line glass grinding machine Schiatti RI/8M Year of manufacture: 2010 Processable glass thicknesses: 3-55 mm Workable glass plates (minimum dimensions): 100 x 100 mm Length of the machine: 7980 mm

Tool milling machine DECKEL FP1 with 3 axis active digital display TNC 113 from educational institution -Travel X/Y/Z 300x160x340mm -Speed range 40-2000 rpm -Feed infinitely variable in three axes Hobkn Asv Abp Tju S Tjl -Rapid traverse in all three axes -Vertical milling head - 100mm movable -Vertical - Horizontal milling device -Drive power 1.5/1.9KW -Rigid angle table -3 axis digital display Heidenhain TNC113 -Coolant device -Work light -Documentation Dimensions: LxWxH 1.3x1.2x1.6 meters / Weight 850Kg

Inv. Num. : 9234 Type: TruLaser 1030 Producer: Trumpf Created: 2024 Parameters: Control system: SINUMERIK 840D SL Maximum power: 10 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness when cutting (aluminium): 30 mm Maximum sheet metal cutting thickness (steel): 35 mm Maximum sheet metal cutting thickness (copper/brass): 12 mm Feed length Z-axis: 115 mm Source: TruDisk 10 000 W Machine height: 2200 mm Machine length: 9300 mm Machine width: 4700 mm Machine weight: 5500 kg Equipment: Cross and longitudinal conveyors Pallet Changer

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Slicer Bizerba SE 12, Diagonal Cutter, Connection 400V, year of construction 2006, Dimensions approx. 70x60x45cm, weight approx. 50kg good used condition, fully functional

Key data: 160 kN, 50 mm, 1250 mm

Sell a used broaching machine from Karl Klink, model RSI 16. The machine ran until dismantling. Three clearing stages can be installed on the machine at the same time. The dimensions of the machine are LxWxH 1700mm x 2000mm x 4100mm. The weight is 4500kg. Incl. accessories such as mounts, broaching needles, etc. As shown in the photos. If you have any further questions, please contact us. The machine can be viewed by prior appointment. Loading, lying down, onto a truck is no problem. The sale is without guarantee and warranty. The return is excluded. All information without guarantee.

CNC - Universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Built in 1997 -Travel X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - Horizontal milling device -Drill quill -Coolant device -Angle table -Machine enclosure -Documentation Dimensions: LxWxH 3,9x2x2Meter / Weight 4000Kg Hobkn Au Sjv Iklus Tol

Machine still visible in operation at user’s premises.

TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel

Used industrial machine offered by IBEXTRA.

Fasti - Round bending machine / type 2040x2mm -GS / Identifier -Roller diameter 105mm -Max. sheet thickness over the entire length 2mm -Footswitch -Safety device Dimensions: LxWxH 3x1x1.3 meters / Weight 1400Kg Hebjvdnahskn Au S Tsl

Suitable for regrinding and production of wood and metalworking tools of all kinds., Accessories:, Total enclosure, Fanuc robot loader with 6 controlled axes and camera system, Software Toolstudio Standard & Advanced Version 3, Software Helitronic Toolstudio Option Step Tools/Drills, Automatic fire extinguishing system, Drive chiller for all drives, Measuring probe, Oil drip tray, Glass scales on the linear axes, Electrostatic mist collector, Pneumatic workpiece clamping, Automatic, hydraulically actuated steady rest, Measuring mandrel ISO 50, 3 grinding wheel adaptors, Longitudinal movement (X-axis): 400 mm, autom. X‘-axis for moving the workpiece carrier: 110 mm, Vertical movement (Y-axis): 320 mm, Transverse movement (Z-axis): 320 mm, Rotary table swivel range (C-axis): - 110 ° - + / 160 °, Swivel range B-axis (grinding head): +/- 20 °, Workpiece carrier (A-axis): ISO 40, Speed  ...

FRÖMAG RAPIDA 463 slotting machine incl. platform & accessories -Manufacturable groove widths 3 - 63mm -Largest groove length 600mm -Indexing table -In bores from 10-500mm -Feed size 0.01-0.25mm -Cutting speed infinitely adjustable 2-22 meters /min -Return speed-Constant 50 meters /min -Load capacity 3000 kg -Connected load 4.6 KW -Incl. work platform -Various drawing needles & matching accessories in the tool cabinet Dimensions: LxWxH (machine) 1.6x1.5x2.3 meters / weight 3500 kg

DROOP & REIN - SZ100 Lubrication Groove Drawing Machine -Largest to clamp diameter 140mm Hobswczw Nskn Au S Tel -Bore of the spindle 40mm -Length of the groove in one pull 100mm -Distance between chuck / tailstock tip 350mm -Working speeds - 3 -Electric lining protection -Weight approx. 300Kg Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight 300Kg

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight app ...

Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg

Measuring and evaluation electronics: Rotor Test 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor length: 4000mm, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible.

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

turning diameter: 570 mm turning length: 2000 mm control: num + CNC Keller centre height: 280 mm turning dia. over face-slide: 365 mm spindle bore: 62 mm spindle turning speed range: 3 - 2500 U/min spindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/min feed in x - axis: 0,01 - 50 mm/U feed range Z-direction: 0,01 - 50 mm/U rapid travel - longitudinal/face: 10 / 5 m/min feed power: x-Achse 7100 N feed power: z-Achse 12.500 N travel of cross-slide: 345 mm upper slide travel: 125 mm bed width: 360 mm tailstock quill diameter: 80 mm tailstock quill stroke: 190 mm tailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kg max. workpiece weight between centres: 1000 kg max.workpiece weight:each extra steadyrest: 300 kg threading metric: 0,1 - 400 mm/Stg. dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 m total power requirement: kW weight of the machine ca.: t A ...

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions LxWxH 0.8x0.6x2 meters / Weight 450Kg

Erka BSA long scooter for refurbishment

STIERLI - Bender 300 U / Horizontal bending machine -Year of construction 2011 -CE marking -Max. working pressure 300KN -Stroke length 300mm -Motor power 4 KW -Hand switch -Footswitch -Various matrices -Bending tools -Stop -Documentation Dimensions: LxWxH 1.5x1.2x1.3 meters / Weight 800Kg

Several used and powerful Gansow professional scrubber driers for trade and industry in stock! These cleaning machines are designed for professional floor cleaning and are in high demand. They are ideal for small and medium-sized areas, e.g. production areas, sales areas, warehouses. Gansow cleaning machines are very manoeuvrable and can be easily guided around obstacles. In order not to waste any cleaning agent, the water is distributed in the middle of the brush. The suction cup ensures the best drying results Delivery is without batteries, incl. charger. The cleaning machines show signs of use, have been tested for function and cleaned. Technical data Manufacturer: Gansow GmbH Co.KG Type: various models, e.g. 54 B 53 Voltage: 24 V Power consumption: 1,646 W Degree of protection: IP 41 Weight: approx. 277 kg We would like to point out that with regard to the Prod ...