136,818 used machines on RESALE, but how to find them? Machine Search
Offered is a horizontal flow wrap packaging machine (HFFS). Material types: heat-sealable films (BOPP, PET/PE, Alu/PE), cold-seal films, film width max.: 500mm, roll diameter max.: 350mm, core holder: 75mm, product dimensions X/Y/Z: 40mm-350mm/10mm-220mm/0mm-100mm, production output: 120-150bags/min. Viewing possible by appointment.
hobbing length: 1750 mm milling width: 260 mm max. module: 10 table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm M ...
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 124 turning speed range - spindle: U/min transmission ratio: drive capacity - spindle motor: kW tension force: kN swivellable: manuell +/-45 ° max. tool diameter: 125 mm max. tool weight: 6 kg table surface area: 400 x 800 mm T-slots: 5x14x80 max. table load: 400 kg feed speeds: X/Y: 0 - 6.000 mm/min feed speeds: Z: 0 - 4.000 mm/min rapid traverse: X/Y: 6 m/min rapid traverse: Z: 4 m/min total power requirement: 11 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,9 x 3,5 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.
incl. integrated punching station Cutting angle range: 30°-120°, Sheet thickness up to 6 mm Punching capacity 15 tons Table approx. 1000 x 650 mm, incl Footswitches, div tools and stops Manual
Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.
Key data: 1 mm, 40 mm
Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...
Key data: 840 mm, 3000 mm, 490 mm
Circumferential. over bed 840 mm, over cross slide 490 mm Center width 3000 mm Speed range 10-1250 rpm, spindle nose DIN 55022 Gr. 11 Spindle bore 105 mm Feeds 0.060 - 1.4 mm // 0.024 - 0.518 mm Thread metric 1 - 224 mm Drive power 18.5 kW Quill path / cone 220 mm / MK 6 incl. Hardened and ground bed guides, electromagnetic brake of the main spindle mechanically driven upper support, rapid traverse longitudinal/transverse Multifix steel holder, fixed bezel 2-axis digital display,
Key data: 330 mm, 850 mm, 190 mm
Circumferential diameter over bed / support 330 / 190 mm Center width 850 mm Bore 36 mm Speed range 60 - 2400 1/min Tailstock quill MK 3 / stroke 100 mm incl. accessories: 4-fold holder, chip back panel, T-slots in cross support Tightening tube for collets (New machine was designed according to DIN 8605)
Key data: 1 mm, 50 mm
Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current ...
Tool holder MK 5 Speed range 20-1200 infinitely variable in 3 rows 1/min Feed rate 0.063-0.63 mm/min Projection 300-1250 mm, quill travel 355 mm Distance from spindle head to base plate 375-1375 mm Swivel range boom 360° Connected load 5 kW
Key data: 510 mm, 2500 mm, 4 St.
Martin T51 Surface Planer – Classic from the 60s | 4-Knife Shaft | overhauled at handover For sale is a Martin T51 surface planer, a real German machine classic from the solid cast iron era of the 60s. These machines stand for extremely smooth running, precision and durability – exactly what many modern machines often no longer deliver. ⸻ Technical data & equipment: • Model: Martin T51 • Year of construction: approx. 1960s • 4-knife shaft • Solid cast design • Precise dressing tables with good flatness ⸻ Condition: • Machine has been tested • Technically fully functional • Signs of wear due to age (purely visual) New knives are used at handover → ready for immediate use Approx. 1200 KG - Forklift available for loading.
Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
B&A REF: 9311 TON: 260 SCREW DIAMETER: 55MM SHOT WEIGHT: 605 STROKE VOLUME: 642CM3 INJECTION PRESSURE: 1460AR PLATEN SIZES: 960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 225MM CONTROLS: CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22 HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
heavy thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 10th button for precise positioning 4-Knife Safety Planer Shaft Table led four times Main motor 4 kW Feed rate 5, 8, 12.5, 19.5 m/min Steel - Pull-out roller Link pressure beams made of solid aluminium material Under-table roller Year of manufacture 1997 CE conformity Machine is WORKSHOP TESTED in VERY GOOD CONDITION From stock Lieboch
Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips
Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
CONTROLS PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE Working width: 1000 mm number of brushing station: 6 BELT GRINDING UNIT workpiece height (max): 100 mm spindle revolutions (min): 0.3 /min spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1800 mm space requirements -front/back-: 1750 mm total height: 2200 mm total weight approx.: 1500 kg
A tray sealing machine for the food industry is offered. Tray formats: Format A X/Y/Z: 267mm/326.5mm/65mm, Format B X/Y/Z: 227mm/178mm/35mm, Format C X/Y/Z: 106mm/145mm/36mm, VG function, Busch R5 vacuum pump. Inspection by appointment possible.
z-travel: 200 mm Clamping diameter of the cutter heads: max. 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting cone for cutter heads Nominal diameter: 500 mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing devic ...
: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New screening drum for Komptech Maxx. Perforation 25 x 25 mm offset square. Sheet thickness 8 mm. IMMEDIATELY AVAILABLE.
GENERAL Project No.: 905713 Quantity: 1 pcs. Manufacturer: GEORG RENDER Type: W 90 TH4 WSKAT PLC Control: Siemens SIMATIC HMI Year of Make: 2017 Condition: Used machine PARTS CLEANING Cleaning medium: Water-based Front loader Max. weight per load 120 kg GENERAL TECHNICAL DATA Total power requirement 26 kVA Machine weight approx. 750 kg NOTE We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.
Polar 92 ED year 1997 in very good condition Colour monitor light barrier side tables air table
Schneider Seantor 115 MC year 1982 overhault in 2003 with new control board air table side tables light barrier in very goog condition
Width 66 cm Year of manufacture 2007 Automatic Paper Folding Machine Computer control with touch screen Flat pile feeder FFH Automation Kit Feeder Double Suction Wheel 1st station: 6 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft 2nd station: 4 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft Palamides delta 703 Bundling Machine Delivery date: immediately
Description cab Label dispenser HS 60+ with control panel and display for label feed and with rewinder T-10 Used labels Roll width min.: 8 mm Labels Roll width max.65 mm Labels Roll outer max.:200 mm Dispensing direction: feet ahead
Description Label dispenser Avery Dennison ALS 380 Top used device with mobile height and depth-adjustable transport rack
maximum number of results exceeded
please refine your search
