sizing machine used for sale

Coffee grinder for sale, Bühler DMBQ 1000, year of construction 1979, power supply, 2 roller passages on top of each other, roller diameter 250mm, 10hp motors, with water cooling. Very good condition.

PART NUMBER: 7679 SPECIFICATIONS - max planing width 610mm - max planing height on both sides 200mm - electric top, up/down adjustment - max planing height on four sides 100mm –in advance: - Pulling insertion shaft, toothed - Flingers -Pressure - 2 pulling shafts, toothed -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - pulling shaft, smooth, outfeed – from below: - guide strip - pulling roller, toothed - planer shaft 610mm, 4-knife 5.5kW - 2 smooth, pulling shafts –behind: - 2 side spindles + clamp 1) Vertical right 100mm 4kW 2) Vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - Manual planing width setting - 6 types of feed speeds: 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions length/width/height 2500x1800x600mm - weight about 3000kg ADVANTAGES – ideal for processin ...

Jeremy Minimax Uno skin pass pass machine, built in 2018 - Manufacturer: Jeremy - Model: Minimax Uno - for 60cm wide trays - Hopper capacity approx. 40 litres - Skin pass machine with 2 attachments and accessory trolley - made of stainless steel Specifications: - Year of construction: 2018 - Power: 3.2 kW - Current: 16 A - Voltage 230 / 400 V - Frequency 50 Hz More pictures and information on request

Weinig Uniplan Hydromat with jointer 220mm

Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - .ucymachines/ Contact us at - sales@ucymachines

"The machine is in good technical condition, a test run is possible by prior arrangement."

TECHNICAL DETAILS Travel X x Y: 4000 x 2000 mm Cutting range X x Y x Z: 4064 x 2032 x 70 mm Workpiece weight: 1270 kg Positioning speed per axis / simultaneous: 100 / 140 m/min Axis acceleration: 12 m/s² Position accuracy: ±0.1 mm Repeatability: ± 0.05 mm Edge Detection Accuracy: ± 0.5mm Table: Interchangeable table system Laser Source: Fiber 4000 Power: 4000 W Wavelength: 1μm Polarization: unpolarized Pulse Rate: 1 - 2500 Hz Sheet thickness steel: 20 mm Sheet thickness aluminium: 15 mm Sheet thickness stainless steel: 15 mm Sheet thickness copper: 8 mm Sheet thickness brass: 8 mm MACHINE DETAILS Dimensions: 12.9 x 6.75 x 2.5 m Weight: 15 t Power: 25 kW Switch-on time: 23,477 h Laser switch-on time: 5,248 h

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

Used packaging machine for sachets from 3 grams to 100 grams of Italian brand Omag model C3/1. New 2002. Control panel with touch screen, electric panel.

Key data: 400 mm

CNC Universal Cylindrical Grinding Machine with Internal Grinding Device External and internal grinding AZ Model RUX 1800 Year of manufacture 2018 Siemens Sinumerik 840D controller Grinding diameter 400 mm Center width 1900 mm Workpiece weight without steady rest 650 kg Grinding wheel diameter 660 x width 100 x bore 305 mm Grinding wheel spindle speeds 300 - 1500 rpm. Manually rotatable grinding wheel head 0 - +20° Internal grinding spindle Grinding wheel size 115 x 49 x 55 mm X-axis 480 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. Z-axis 2740 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. HEADSTOCK Speeds 5-400 rpm. Bezel SMW AUTOBLOK Premium Line Coolant Setup Offer number V-7059

Stock number: F1069, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Total height: 1550 mm, Conveyor: L 2000 x W 83 mm, Filling heads: 2 pcs Ø 10 mm, Manufacturer: J. Kugler & Co., Type: Minimat, Year: 1979

Stock number: F1097, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Conveyor: L 3650 x W 82 mm, Filling heads: 4 pcs Ø 10 mm, Manufacturer: Hero de Groot NV

Stock number: F1083, In stock: Yes, Amount in stock: 1 pc., Item: Capsule machine, Conveyor: L 2820 x W 100 mm., Capacity: Max 4800 pcs./min., Dimensions: L 2820 x W 1450 x H 1750 mm., Total height: 1750 mm., Manufacturer: King, Model: CAP 60, Documentation: Yes, Other: For plastic screw caps

Stock number: DT072, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: Max 72.600 pcs/hour, Stations: Circular with 22 pcs. stations, Tablet size: Ø 19 mm, Other: Control cabinet - Ø 11 mm set of formats

Stock number: F1105, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Labelling machine, Standing: On a legstand with wheels, Dimensions: L 2200 x W 1100 x H 1450 mm, Label size: Max H 120 mm, Label placement: On the side, Packaging form: Cylindrical, Roller: 3-Roller system, Conveyor: Lamella, Conveyor dimensions: L 2000 x W 83 mm, Manufacturer: EME, Model: 4-120, Year: 2002, Other: With 2 x circular tables Ø 600 mm

Stock number: F1076, In stock: Yes, Amount in stock: 1 pc., Item: Capsule machine, Standing: On a foot, Dimensions: D 800 x W 300 x H 1500 mm., Total height: 1500 mm., Theoretical capacity: 6-1200 bottles/hour, Variable speed: 380 Volt - 0,5 HP, Manufacturer: Scantool, Type: PP18, Year: 1989, Other: 1 head for aluminum screw caps PP18

Stock number: F1100, In stock: Yes, Amount in stock: 1 pc., Item: Carton sealing machine, Standing: 4 pcs. legs, Dimensions: L 1070 x W 1000 x H 1400 mm, Total height: 1600 mm, Motor: 0,69 kW - 220 Volt, Manufacturer: Robopac, Model: 50 M , Year: 1998

Stock number: F1096, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dimensions: L 3250 x W 1600 x H 2000 mm, Total height: H 2000 mm, Theoretical capacity: Estimated 900x5 l/h, Filling heads: 3 pcs. with cut and neck filling, Dosage: Variable dosing, theor. 0-20 l, Conveyor: L 3250 x W 195 mm, Type: MS, Model: Combi 2

Stock number: F1073, In stock: Yes, Amount in stock: 1 pc., Item: Carton sealer, Standing: 4 pcs. legs, Construction: For top and bottom tape, of cardboard boxes etc., Product size: Min L 200 x W 150 x H 127 mm, Product size: Max L 550 x W 480 x H 480 mm, Motor: 0,4 kW - 380 Volt, Type: MH-FJ-3AE, Year: 2020

Stock number: F1103, In stock: Yes, Amount in stock: 1 pc., Item: Stretch film packing machine, Size: L 300 x W 540 x H 250 mm, Theoretical capacity: Max 1440 UPH, Manufacturer: Pester, Type: PEWO-Pack 450 SN, Year: 1990, Documentation: Yes

Stock number: F999, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-620 ml, Manufacturer: Trepko, Type: 620, Other: Product funnel

Stock number: F1075, Item: Bottling machine, In stock: Yes, Amount in stock: 1 pc., Standing: 4 pcs wheels, Dimensions: L 1500 x W 1100 x H 2200 mm, Total height: 2400 mm, Dosage: 5-25 l, Filling heads: 4 pcs, Other: Mechanical and electronic counting mechanism - Incl. air powered capsule tightener

Stock number: F994, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-540 ml, Filling heads: Filling nozzle with clip, Manufacturer: Obrut, Other: Product hopper - Foot switch - Compressed air driven

Stock number: F1074, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling/closing machine, Conveyor: Throughout lamella conveyor W 100 mm, led at an angle, Dosage: 2x0-100 ml, and 2x0-300 ml format set, Filling heads: 2-headed piston dosing (prepared for 4-headed) - 10 mm filling nozzle with cut, Capsule: For liquid dosage in bottles, and closing with screw capsule, or trigger capsule, Manufacturer: Flowcip Monoblock, Type: Bottom-up filling, Other: Safety shielding - Separately Ink Jet - Misc. format set for differently bottles and capsules - Incl. vibrator sorting

Stock number: F1072, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Double labelling machine, Label size: Max height 190 mm, Label placement: For front and back labelling, Conveyor: Throughout lamella L 3000 x W 83 mm, Other: Alignment - Sideband - Top band, Other 1: Ex secured Exde II B

Stock number: F987, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-1500 ml, Variable speed: Yes, Manufacturer: Trepko, Type: 620, Other: Product hopper

Stock number: F1067, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Capsule machine, Direction: Working direction from left to right, Capsule: For plastic screw caps or PP plastic caps, Capacity: Max 4.000 pc./h., Conveyor: W 83 x L 1700 mm, Manufacturer: Zalkin, Type: TM100, Model: With carousel for bottles, Other: Misc. format sets

Stock number: F963, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: Airdriven piston dosage with clip, Piston dosage: 0-1 l/stroke, Manufacturer: LKF, Type: 101, Other: Product hopper

Stock number: F1098, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Capsule machine, Standing: On legs, Capacity: App. 1800 bottles/hour, Dimensions: L 2600 x W 1200 x H 2200 mm., Conveyor: L 2600 x W 150 x H 840 mm., Manufacturer: Trepak, Type: TK 30-A-SK, Model: Pick and place, Other: Capsule head with claws - capsule sorting and for plastic screw capsules

Stock number: F1099, Material: Stainless construction, In stock: Yes, Amount in stock: 1 pc., Item: Lid machine, Standing: On legs with wheels, Dimensions: L 2500 x W 120 x H 850 mm., Total height: 1400 mm., Motor: 0,25 kW - 220 Volt - with variable speed, Max lid width: 100 mm., Packaging high: 50-225 mm., Other: Belt conveyor with driven top roller

Stock number: F969, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Dimensions: L 500 x W 400 x H 400 mm, Total height: H 700 mm, Piston stroke per min.: Max 28 SPM, Variable speed: Yes, Filling heads: 1 pc., Dosage: 0-75 ml, Motor: 220 Volt, Manufacturer: Lindeløv & Striegler, Type: Packmaster, Model: D. C. 300, Year: 1973

Stock number: F985, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-1 l with clip, Stations: 8 pcs round table filling, Capacity: Approx 1500 pcs/h depending on dosing and product, Manufacturer: Hansen & Fredsgaard, Type: RTHF, Other: Product funnel

Stock number: F962, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: Compressed air driven piston dosing with clip, Piston dosage: 0-1 l/stroke, Manufacturer: LKF, Type: 100, Other: Product hopper

Stock number: F961, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: Compressed air driven piston dosing with clip, Piston dosage: 0-1 l/stroke, Manufacturer: LKF, Type: 100, Other: Product hopper

Stock number: F902, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 10 pcs., Manufacturer: ADA, Type: 2, Other: Pump with balance tank

Stock number: F903, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 4 pcs, Manufacturer: ADA, Type: 2, Other: Balance tank - Sliding rail

Stock number: F924, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-300 ml, Double jacket: For hot filling of product, Stations: 12 pcs, Table: Circular table model with Ø 67 mm cassettes, Other: Prepared for laying on capsules and capsule tightener

Stock number: F897, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: With bottom-up filling and piston dosage, Filling heads: 4 pcs Ø 18 mm, Manufacturer: Minab, Other: Product tank - Excl. conveyor

Stock number: F889, Materiale: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Juice dispenser, Capacity: Max 60 °Bx, Other: For mix and dosage of concentrates

Stock number: F890, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 1 pc. with counter, Variable speed: With hose pump, Conveyor: L 1500 x W 100 mm, Year: 1982, Other: Sluice system

Stock number: F753, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Fyldemaskine, Piston dosage: 0-12,5 l/stroke, Filling heads: 4 pcs with bottom-up filling and cut off, Conveyor: Prepared for conveyor, Balance vat: L 1080 x W 500 x H 350 mm, Manufacturer: Alwid Universal D, Other: Drip tray

Stock number: F764, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Hanging: In aluminum frame, Variable dosage: Max 2x1,5 l, Manufacturer: LS, Type: Double, Other: Air driven

Stock number: F717, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling line, Capacity: Max 6000 pcs/h, Item 1: Bottle erector, Manufacturer 1: Rondo unscrampler, Type 1: 752, Traks 1: 10 pcs., Item 2: Filling maschine, Filling heads 2: 12 pcs. carousel type, Dosage 2: 0-500 ml, Manufacturer 2: Bosch, Type 2: FKR G12, Item 3: Capping machine, Manufacturer 3: Bosch, Type 3: VCR A04, Other 3: For screw caps with insert

Stock number: F661, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Manufacturer: Recomatic, Pump: Doseing loberotor pump, type SSP 100 NDM, Other: Air driven

Stock number: F665, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 10 pcs, Dosage: 100-2500 ml, Capacity: Max 3000 pcs/h, Manufacturer: ADA, Type: 1, Other: With exit conveyor - Balance tank

Stock number: F647, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-500 ml, Filling heads: 4 pcs., Manufacturer: Vollenda, Type: CA3000, Other: Bottom filling - Drip tray - Balance tank - Air driven

Stock number: F653, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cup filling/closing machine, Piston dosage: 50-550 cm³, Theoretical capacity: 2500-4000 UPH, Filling heads: 2 pcs. - Ø 80, and Ø 91 mm, Double jacket: Product container with double jacket, Lid: 2x2 lid magazine with pressure station, Manufacturer: Gasti, Type: Doga Therm 41S, Other: Cup magazine - Cassette conveyor with 2 formats

Stock number: F630, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-0,2 l, Filling heads: 1 pc., Manufacturer: Trepko

Stock number: F649, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling/closing machine, Dosage: Vertical turning type with double dosing, Closing: Cork put in and capsule put on, Sort out: Double sort out for cork/capsule, Manufacturer: Paxall, Type: FSS 6000, Other: Control panel - Stainless conveyor

Stock number: F543, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: On rack with wheels, Piston dosage: 0-2 l, Manufacturer: LS, Other: Air driven