sizing machine used for sale

Formats : 75 x 120 mm - 320 x 420 mm Openings : 4 above, 4 below Number of stitch positions : 10 Max. speed :180 c/min

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute Two similar machines available at the same place !

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

x-travel: 350 mm y-travel: 200 mm z-travel: 350 mm table surface area: 700 x 280 mm spindle taper: SK 40 : 150 - 1660 U/min feeds: 25 - 285 mm/min rapid traverse: 1 m/min quill stroke: 80 mm milling-head swivable +/-: 45 ° total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wrapper

swing dia.: 440 mm max. turning diameter: 220 mm turning length: 450 mm travel -x axis: 200 mm control: Fanuc 18i-TB max. helix angle: 60 ° spindle bore: 64 mm tool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 21.425 year: 2011

One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well

FOLDING MACHINE MBO T 500 4-F -Max paper size 52 x72 cms. -Year 2003, only one onwer -Rollers in excellent conditions -Flat pile feeder -Four combi folding pockets -MC Control FW1 -Anti noise hoods protections -Sheet delivery MBO SA 52 -All manuals, tools and accessories -Available in March

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 20.567 year: 2011

One used mesh welding line for standard and special mesh. Line wire feed from spools, coils or reels; straightening units, line wire pull-off and compensating mechanism; welding machine with roller advance feed; Cross Wire Disc Feed; Line Wire Shear; mesh turning and stacking unit This line is equipped as well with line wire pay off for spools. Extras: Spools ( 3 tons ), main trafo, compressor, butt welding machines and cold rolling line

One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 14.326 year: 2009

For sale Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line . year: 2014

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

Laminating machine up to 65 cm roll width, good condition

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

A used Kemper ST125A spiral mixer extendable with 2 stainless steel boilers and 2 new timers from Schleicher is immediately available in our warehouse. - Type: ST125A - with 2 boilers - for max. 125 kg flour or for max. 200 kg dough - With 2 automatic timers (new) - Kettle diameter 90 cm - Boiler capacity: 300 litres - Boiler drive via friction wheel - Boiler can be manually locked -extendable - With 2 new timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine - Machine completely repainted Trade-in and shipping costs on request. We are constantly looking for and buying bakery machines of a ...

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

PART NUMBER: 7458 SPECIFICATIONS - max diameter of the machined pins 120mm - 60mm sleeve installed - 5 additional bushings 40, 70, 80, 90, 100mm - max input material diameter 150mm - min input material length 800mm - max machining allowance per side 15mm - knife head drive motor 18.5kW - 4 types of speed feed + forward/reverse - feed motor about 1.1kW Successively: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling outhands - dimensions length/width/height 3060x1240x1400mm - weight about 1800kg ADVANTAGES – Polish production – 3-knife head – additional bushings included – used turning machine, very good condition Net price: 36900 PLN Net price: 8581 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Dough dividing and rounding machine Fortuna Primus Pro head machine - Dough dividing and casting machine - Fortuna Primus Pro - 4 rows -Stainless steel - Voltage: 3x400+N Volt - Power: 1.9 kW - Frequency: 50Hz - Required fuse: 25 A - Year of construction 2013

Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - .ucymachines/ Contact us at - sales@ucymachines

The Röders RFM 1000/2 is a high-precision vertical machining center designed for intricate milling tasks. Below are its key technical specifications: Travel Distances: X-Axis: 1,000 mm Y-Axis: 800 mm Z-Axis: 600 mm Table Specifications: Dimensions: 1,200 mm x 1,000 mm Maximum Load Capacity: 2,000 kg Spindle Details: Speed Range: 100 to 36,000 rpm Power: 17 kW Sortware update :2019 Find more here - .ucymachines/ Contact us at - sales@ucymachines

A converted fully automatic strapping machine with a pressing function is being sold. This was converted by us to a GS-41 unit. This not only makes the machine 2.5sec/strapping faster, but also gives a fast E-part delivery. About the GS-41: Dimensions: 519x280x480mm Weight: 71 kg Power connection: 400V/3ph/50Hz Control voltage: 24V/DC Power requirement: 1kW Welding: Vibration welding Welding time: approx. 0.5-1.8sec Clamping time: approx. 0.5-max. Belt type: PP and PET Band width: 10mm-16mm Band thickness: 0.5-1.0mm The control system has also been adapted, and now there is a Siemens S7-1200 in it. The plant has not yet made 20,000 strappings! The machine hourly rate is only 50% compared to a new machine! If I have aroused your interest, please do not hesitate to contact us.

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Key data: 50 , 1 , 14

Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm Control: SIEMENS SINUMERIC 840D table-size: 2.900x700 mm table weight: 2.150 Kg tool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mm workpiece weight: 6 kg workpiece dia.: 80/130 mm : 30 fach main drive: 18,4/14 kW speed: 14.000 mm/min rapid traverse: 40 m/min feed: 40 m/min Machine on: 18.859 h Spindle hours: 5.666 h internal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kW weight of the machine ca.: 14.520 kg dimensions of the machine ca.: 10.280 x 7.230 x 3.042 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A cardboard stand for pre-glued cardboard tubes and an associated carton sealer are sold. The system was only serviced and some things were renewed by the manufacturer because the purchase of the new line was questionable. Conveyor belts are also supplied in addition to the carton erector and carton sealer. Photos to follow

For sale is a used SOMIC packaging system with 2 fan conveyors (=2 formats). Tubular bags were packed, but other products that arrive horizontally from an infeed conveyor can also be packed. The Somic has a height-adjustable levelling belt where the contents of the tubular bags can be distributed before packaging. Somic had worked with Elau technology in the control area and Elau discontinued these servos and controllers. The Somic can be equipped with new Siemens control technology 1500 and undergo a general overhaul.

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system

Universal tool and cutting grinding machine TACCHELLA 4 AM - Universal device, Hydraulic movement of the table., Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 400 mm, Cross travel y axis: 250 mm, Clearance between worktable and spindle axis: 375 mm, Wheel speed: 3000/6000 rpm, Wheel dimension: 200x20 mm, Spindle motor power: 1,5 Kw, Weight: 1150 Kg, Accessories: Cooling system, motorized dividing device

CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Inv. Num. : 8203 Type: ALPHA 2800 XS Producer: Harrison Created: 2011 Parameters: Control system: FANUC Maximum turning length: 2000 mm Maximum turning diameter over bed: 800 mm Maximum turning diameter over support: 710 mm Maximum spindle speed: 1400 1/min Spindle bore: 125 mm Weight: 7500 kg

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Inv. Num. : 8205 Type: Pratica GLP Producer: Bottero Created: 2015 Parameters: Max. workpiece dimensions: 3150 x 1415 mm Number of axes: 3

Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures!

General Project No.: 905711 Quantity: 1 pcs. Manufacturer: TEKNOX Type: ROTOR M 2B HT Control: Weintek PLC Year of Make: 2022 Condition: Used machine Layers Machine Approx (Hrs): 1-2 Layers Description PARTS CLEANING Cleaning medium: Water-based Front loader Washing tank with high-pressure cleaning pump 900 l Flushing tank with high-pressure cleaning pump 900 l Vacuum drying External Pneumatic Oil Separator Swivel/swivel device Bag filter for washing tank Outer roller conveyor Transport trolley for 4 baskets Max. weight per basket max. 250 kg OTHER EQUIPMENT Modem for remote diagnosis and teleservice GENERAL TECHNICAL DATA Air connection 8 bar Mains fuse 108 A Machine weight approx. 1800 kg Remark We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned a ...

max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 161 t dimensions of the machine ca.: m x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm CNC control 840 D Table load 12 t Table dimensions - lengthways 5000 mm Table dimensions - crossways 2500 mm ATC tool changing device 200-pos. Tool weight max. 30 kg Tool holder HSK A 100 Tool diameter 250 mm Tool length - max. 500 mm Spindle speed: 5 - 6000 rpm C-axis -10 to 370 deg B-axis 5 to -95 deg Column distance 3000 mm Machine weight approx. 161 t Space requirement approx. 20.5 x 11 x 6.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Rotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRot ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgDirect measuring systemDir ...

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Cross1000 mmLongitudinal1250 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring  ...