sizing machine used for sale

1 Deck Resonance Screening Machine - Workshop overhauled and tested

Resonance screening machine / feed chute with perforated sieve Workshop overhauled and tested

Air blower for Horizon MC 8, totally overhauled by Ryobi rep. and in as new condition- ready for production. Can ship worldwide.

MBO T530 folding machine with stand up feeding with the following units: 1. MBO T 530 -1 53/4-R 2. MBO T530 -2- 53/4 3. MBO stream delivery table The machine is in production ready condition, with a huge amount of serial equipment such as guides, perforation wheels, etc. Available immediately, can ship worldwide.

Key data: 50 mm, 800 1/min

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

X / Y / Z = 400 x 300 x 350 mm Feeds in the 3 axes Rapid traverse in 2 axes ISO 40

X / Y / Z = 320 x 180 x 300 mm Feed in 3 axes Stepless feed Digital display 3 axes

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!

We are offering for sale a Chamber belt system with shrink tank. LikeNEW! Barey used CHAMBER BELT VACUUM MACHINE Model: Conveyor Pro 1065 Packable Products - Meat - Sausages - Cheese - Fish - Fruits - Vegetables - Ready meals - Mechanical components - Electronic components Technical Data - Structure: Stainless Steel AISI 304 - Control Panel: 7 PLC Touchscreen - Dimensions (L×W×H): 2741×1237×1645 mm - Weight: 900 kg - Inner Vacuum Chamber Size: 1110×840 mm - Usable Lid Height: 250 mm (Optional: 150-200-320 mm) - Sealing Bars: 1 or 2 × 1000 mm - Distance Between Sealing Bars: 670 mm - Sealing Type: Monoseal or bi-active, double seal or wide sealing - Conveyor Belt Speed: Variable, up to 40 m/min - Vacuum Pump: 1 or 2 × 300 m³/h (7.5-15 KW) + Booster 500 or 1000 m³/h (5.5 KW) - Final Vacuum Degree: 1 mbar absolute - Power Supply: 400V - 3PH + N + PE - 50Hz - 3KW (without pump ...

Key data: 600 mm, 450 mm, 400 mm

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Table size: 850 x 440 mm Spindle holder: SK 40 Control: HEIDENHAIN TNC 355 Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/transverse/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and transverse: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight approx.: 2.5 t Dimensions L x W x H: 2.7 x 2.5 x 2.0 m Handwheel, coolant device

grinding diameter: 250 mm grinding length: 400 mm centre height: 125 mm Control: Fanuc 21i-T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine gewartet und teilüberholt. -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 hole paper drilling machine, with serial equipment and drill bits. In production ready condition. On pallet: 120 x 80 x 10 cm

ID3466 Löffler TB800-CNC3 year/Year of construction 1994 Bridge saw with Pellegrini rotary table and roller tilting table Bridge saw with Pellegrini turntable and roller tilting table

ID3471 Löffler BF2000/2 year/Year of construction 1995 drilling and milling machine Drilling-milling machine

Comarme Carton Sealer Model GEM-50/RC Condition see photos.

ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)

Evaporator Thermofin Type: TEN071.1-D-2-7 Cooling capacity: 37.3 kW at DT8, 29.6 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 850 x 110 mm Volume: 52 L Weight: 380 kg Quantity in stock: 4 Reference number: CH 534 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Evaporator Thermofin Type: TEN071.1-F-2-7-HG Cooling capacity: 52.1 kW at DT8, 39.3 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 1000 x 1120 mm Volume: 86.66 L Weight: 460 kg Quantity in stock: 5 Reference number: CH 533 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Key data: 700 kN, 132 g/PS, 35 mm

Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

Machine vise – tilting, rotatable

I sell the veneer assembly machine KUPER FLI. Built in 2007. Very good condition. Available the same.

Evaporator Guntner Type: GHN 050C/38 Cooling capacity: 29.6 kW at DT8, 23.2 kW at DT7 Fin spinning: 8 mm Fans: 3 x 500 mm Dimensions: 3650 x 650 x 650 mm Volume: 37.8 L Quantity in stock: 18 Reference number: CH 538 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Two-side evaporator GEA KUBA Type: DRS 44637 Cooling capacity: 60.7 kW at DT7, 58 kW at DT8 Fin spinning: 7 mm Fans: 4 x 630 mm Dimensions: 4500 x 1550 x 700 mm Block made of stainless steel Refrigerant: NH3 Volume: 72 L Weight: 650 kg Quantity in stock: 3 Reference number: CH 535 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

turning diameter: 250 mm turning length: 510 mm control: Fanuc I Series total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 200

Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm

heavy 40s Gillardon with cross table

Key data: 80 kVA, 350 mm, 600 kp

Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Binding machine BindMaster - year 2014 - automatic cover feeding and creasing - programs - spine and side gluing - max. book size 360 x 380 mm - max. cover size 360 x 700 mm - book thickness up to 55 mm

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

Manufacturer: Ziersch Model: ZT 820 Year of Manufacture: 2008 Type of Machine: Grinding Machine Certification: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 390/410 mm y-travel: 290/310 mm z-travel: 380/400 mm total power requirement: 4 kW weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2100x2100x1700 m technical data please see attachment! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic feeder Calander with hydraulic pressure (3000 kg) Sheet separator Option : Stacker Touch screen Pneumatic bobbin axe Sheet size : 52 x 74 – 30 x 21 cm Max speed : 30 m/min Paper thickness 110 – 450 g/m²

MM 3694 ZTM 3 gatherer – 12 stations – hand feed station MM 3030-19 Klebebinder MM 3632 stapler (year 2013) MM 3673 trimmer SCS Automaberg Easy Fly (year 2008)

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Ø min / max to be rectified: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Max. width of grinding wheel in plunge grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Min. ext. Ø of the working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Max. depth of working wheel profile: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Drive wheel dimensions (OD x ID x W): 220x125x125mm, Min. ext. Ø of the drive wheel: 165mm, Øext.min. driving wheel: 165mm, Max. depth of the drag wheel profile: 8mm, Driving wheel motor power: 0,75Kw, Working wheel motor power: 7,5Kw, Drive wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Angle of inclina ...

Vollenda bucket filling system for 2 and 5 kg containers with Motoman (Ehcolo)-EPL160/300 palletizing robot and Robopac pallet wrapper. Auto. Pallet pick-up. Complete system including roller conveyors, dedusting systems, silos with conveyor systems. Facility in very good condition. Original price € 2 million

accumulator pressure: 780 bar 0: 38 ml Capacity: 55 kW control: Siemens KP400 weight: 3.300 kg Power connection: 80 kVA voltage: Hz 50 / 3 x 400 V range L-W-H: 3.240x1.200x2.800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Max. flow rate: 38 l/min -Power HP pump: 55kW -Max. water temperature: 40 degrees -Operating voltage: 3x400V/50Hz -Connected load: 80kVA -Total current consumption: 115A -Curb weight: 2300kg -Control: Siemens Comfort Panel KP400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical parameters: Rated voltage: 400V Rated current: 35A Short-circuit power: 65kA Secondary power supply: 24V Phases: 3 Bdt9Rtbmuq Frequency: 50Hz

Key data: 420 mm, 1500 mm, 3000 1/min

Stock number: 3979 CNC LATHE Manufacturer: MAZAK, Type: QTN 350 M Year of Make: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm DIA. Turning length 1500 mm Main motor power 30 kw Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Tool turret with 12 stations Motor Power Driven Tools 7.5 Kw Powered tools. 25-4500 rpm Control Mazatrol 640T NEXUS Fabr. Controlled in 3 Axes Accessories: Various tool holders. Tool setter Chip conveyance. Cooling water system. Length: 4300mm, Height: 2400mm, Width: 2600mm, Weight: 7900 kg

Bausch and Ströbel Fully automatic pressure-sensitive labeling machine type ESF 1015 for self-adhesive labels (adhesive labels) The processing range is 16 -70 mm for the object diameter and 35 -320 mm for the object height

Formats : 75 x 120 mm - 320 x 420 mm Openings : 4 above, 4 below Number of stitch positions : 10 Max. speed :180 c/min

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute Two similar machines available at the same place !

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy