130,800 used machines on RESALE, but how to find them? Machine Search
Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 43
manf. 2009 / CE Label optical & technical very good conditions! more details on request exw Germany
First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition
Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version
The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...
Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.
DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...
Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;
As good as new hand groove device / creasing device, working width 355mm
Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets
Spine round machine Top condition, cleaned and tested
Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.
From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.
Boyens Jelly compact glaze sprayer Serial: 1500112073 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph
Boyens Jelly compact glaze sprayer Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph
X-travel: 600mm, Y-way:450mm, Z-travel: 450mm; Machine Number: 14772; Table size approx. 800x460mm; Speed max. 10000 rpm, 30-fold tool changer, Tool holder: SK40; Max. table load: 1000kg; Control: Heiden-Hain: TNC430 ; incl. tool cabinet, equipped with tool holders and tools; incl. chip conveyor
Incl. peripherals and documents Dismantled for transport Video available!
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.
Exhibition machine, unused. • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With special tool set Sheet thickness 4 mm Roll diameter 125 mm Projection 200 mm Total power requirement 2.2 kW Machine weight approx. 0.48 t Dimensions approx. 1.6 x 0.6 x 1.2 mm
Boyens Jelly compact glaze sprayer Serial: 1500718186 2018, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph
Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003
Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.
Jaw width: 125 mm Reference: Hercegfi - Lot 5
Operating voltage: 220 -240 V Frequency: 50 Hz Speed: 1000 - 3800 rpm incl. various matching accessories
Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity.
Diosna RZ 3 Residual bread shredder / Universal shredder - Restbrotzerkleinerer Diosna / Oase - Model: RZ 3 - KW: 3 - 400 volts
The butt welding system is equipped with a welding machine from the manufacturer Manufacturer: Castolin The device type is used Totalarc 3000 . Welding machine: ABK Castolin Type: Total Arc 3000 Max welding power: 270 A
Belt sander from MAFAC ; TYPE K 100 BJ 1979 and a double sander from BOSCH, incl. replacement sanding belts
incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006
MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning
Equipped with: adjustable drilling table
MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning
Mägerle rack and pinion grinding machine grinding machine MFP-L Siemens CNC Manufacturer [manufacturer]: Mägerle Type [ type]: MFP-L-260-75 Control unit: Siemens 840D Sinumerik Incl. handwheel Year of construction[construction year]: 10/2008 Travel path: Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support: 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min smallest delivery amount 0,001mm Drive power: grinding wheel (AC) 75kW Total connection power: Machine 113kVA Knoll coolant filtering equipment dimensions ca: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Machine weight: 21.000kg Sp ...
The machine is complete Light or low refurbishment required
Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm
Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5)
Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input capacity: 5.5KVA No-load voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Bookslag by contacting us Weight: 6.9KG Dimensions: 375 x 155 x 300
maximum number of results exceeded
please refine your search
10 € 
