126,679 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Measurement principle: dynamic light scattering (DLS) Measuring range: 0.3 nm to 10 μm (particle diameter) Measurement angles: 15°, 90°, 175°, Multi-angle particle sizing (MAPS) Min. concentration: 0.1 mg/mL (lysozyme) lower than 0.0001% (0.1 ppm, Latex 100nm) Max Concentration: 50% w/v (sample-dependent) Min sample volume: 12 μL Accuracy: Better than +/- 2% on NIST traceable standards Repeatability: Better than +/-2% on NIST traceable standards Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)
Automatische Fadenheftmaschine - Automatic Sewing machine - Large Size Smyth F 150 L Year 1992 - Serial-No. 0209 Signature size min. 80mm - 135mm Signature size max. 560mm - 340mm Number of Stitch 13 Mech. Speed up to 150 cycles/min. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
1 YAMADA Single End Sizing Winding machine Mod. YS-6 12 spindles year of construction 1998 with YAMADA TFB meter counter on each spindle squeeze roller sizing application type non-touch yarn break control sensor on each spindle take-up cylindrical traverse 150 mm (6 inch)
Lift system, Kardex, shelf size: 1250x825mm, 7m high, – used - : Price from location: 13.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of Make: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m wide. Number of shelves: 44 pieces Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, A: 3x5.2, KW 3.6 Condition: used Available: from approx. week 13/2026 Location: Speyer
Malvern Mastersizer 3000 + Hydro LV - Advanced particle size and size distribution system - Widest measurement from 0.01 – 3500 µm - Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)
10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see ...
1 box(12pcs) Pall ARD120UH12 Filter cartridges Pore size 1μm Length: 20", 20 inch, 20 inch, 508mm Diameter: 2.6", 2.6inch, 2.6 inch, 66mm Body is made of polypropylene and glue-free End Configuration Code: H21 End Configutation: DOE, Santoprene Gasket Seal Manufacturing date 2022-08 or newer. All filters are new and originally shrink-wrapped
10pcs(1box) Pall NXT2530U Nexis® T Filter cartridges Pore size 25μm Length: 30", 30 inch, 30 inch, 762mm Diameter: 2.5", 2.5inch, 2.5 inch, 64mm Body is glue-free = chemically inert Manufacturing date 2022-02 or newer.
Stock # U2439-2 Used Erweka (DE) multi-task lab size set with drive AR400. Unit is driven by el motor 0.5 kW, 3000 rpm, 220 V, 50 Hz. Output rotation adjustable in range from 0-400 rpm. As a set there are included: - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Including electrically heated mixing pan type DER. El heater power 500 W. Total volume of mixing pan about 6,5 l. - single piston homogeniser type HO with stainless steel electrically heated product hopper with volume about 2.8 l. Additional stainless steel hopper with volume about 3 l, and bypass stainless steel pipe. Output up to 30 kg/h. - Stainless steel vertical jacketed mixing tank type SG3W with belt driven 3 level paddle agitator. Bottom discharge. Total volume about 5 l. All devices last time had been working in cosmetic industry.
Stock# U2439-3 Used Erweka (DE) multi task lab size set with drive AMD/EX. Unit is driven by el motor 0.37 kW, 920 rpm, 380 V, 50 hz. Ex design and is equipped with vari speed gearbox. Output rotation adjustable in range from 46-410 rpm. As a set there are included: - stainless steel three roll mill type SMS - rolls with width 107 mm x diameter 50 mm. Output in range 2-20 kg/h. - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Total volume of mixing pan about 6l. - single piston homogeniser type HO with stainless steel product hopper with volume about 3 l. Output up to 30 kg/h. - universal drive arm type UG with device for mounting ceramic ball mill type KM 0, mill volume 0.5 l, includes ceramic milling balls. All devices last time had been working in cosmetic industry.
Shaft coupling, with overload device CENTA ACTUATORS, MIKIPULLEY Japan CENTAFLEX size 250 Hollow shaft diameter: Ø 40 / 60 mm Installation length: 270 mm New ! Dimensions: 370 x 370 x 270 mm
Have different sizes of millstones in stock
A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.
Mikrosa SASL 5 CNC (Kronos L size), complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul No hydraulic movements Application 5-axis CNC controlled in position with digital brushless motors: - working wheel axis motor with Heidenhain linear encoders - Grinding wheel and regulating wheel both with electrical axis movements - rotating axis with digital brushless motor on regulanting wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to regulate number of RPM Protection and fume extraction hood For through-feed grinding and customization possible according to customer needs. Machine refurbished, therefore possibility of testing in our warehouse, CE certification, manuals, 12 months warranty. The machine is visible working in our warehouse in Gussago BS. Mimu Ma ...
Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Composed of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories
Used Roll Press FORTUNA, Machine Size 4 -In Bakery Condition- - 30 hollows per plate - Weight range: 40 - 110g - Condition: very good, - Video on request A viewing is of course possible by arrangement.
Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0
Granulate conveyor accessories various sizes, approx. 5 pcs., pallet
Lot 4-WORK Professional Work Gloves Sandy Grip EN388 (14400 pairs) Specifications: Brand: 4-WORK Type: Work Gloves Sandy Grip Standard: EN388 Coating: Latex Sandy Grip Sizes: 9 / 10 / 11 (approximately evenly distributed) Content: 14400 pairs Packaging: 60 boxes of 240 pairs Features: Latex grip coating suitable for wet and dry work Breathable and flexible material Optimal tactile sensitivity Packed per full box Particularities: Large batch suitable for intensive use and resale Widely applicable in construction, industry, logistics and maintenance Sale concerns a bulk batch Auction-ID: A1-40105-66
Various sizes, colours Auction-ID: A1-45889-2551
Shelves IKEA Gorm Different sizes – different quantities – one lot 13 x corner size 70 x 52 cm 2 x shelf 72 x 52 cm Approx. 40 shelves 72 x 30 cm Packed on a Euro pallet Auction-ID: A1-45889-2701
Strips of screen printing plate Size: 40 cm x 10 cm 20 mm thick All edges black – each with two holes 110 pieces in pallet with wooden frame Auction-ID: A1-45889-2698
traffic cone, Lübeck cones, different sizes mixed lot approx. 60 pieces 80cm approx. 15 pieces 50cm approx. 20 pieces 30 cm approx. 25 pieces Auction-ID: A1-45889-2614
Mixed lot of monitors various types of various sizes Partly heavy and foldable design total approx. 10 pieces see pictures All packed in plastic box Auction-ID: A1-45889-818
Brake Test Bench Hofmann Brekon 204 - SET Both sizes included in the set Version 1: 670x2350x255 Version 2: 670x2905x255 Incl. display and wiring Auction-ID: A7-45974-3
Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...
Basic-outdated Fortuna Gr.4 machine was anew varnished completely dismantled and wearing parts were renewed. 6-month guarantee taking back old machine possibly.
To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm
To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails
ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen
Widthness: 2.000 mm - 6 Decks - Year of Manufacture: 2001 - With 2 Pcs. Unbalance exciters, 15 kW / 970 RPM Electrical Motor and springs.
Widthness: 1.500 mm - 6 Decks - 2 Pcs. Unbalance Motors (3,6 kW / 1.430 RPM) - With frame and springs
The offer includes 10750 Bilora hard shell bags. Formerly intended as protection for small digital cameras, we have already sold them as USB and SHDC bags, medicine bags and bags for measuring devices, such as long-term ECG or similar Each bag has a belt loop and neck strap. We would now like to part with the remaining bundle. These once had a list price of EUR > 15 each. In the PDF files, a list of quantities and the corresponding Bilora catalogue page.
Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 ? Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.
Cutting capacity: 4300 mm x 4250 mm. Sawblade height: 95 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 5-130 m/min. Returnspeed 130 m/min. Programm fence speed: 80 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1050/1850/2650/3450 mm. Machine control: CADmatic 4 air tables of 2160 x 650
Auction-ID: A1-45889-2969
maximum number of results exceeded
please refine your search
150 € 
