single spindle lathe used for sale

faceplate diameter: 4000 mm swing diameter: 4600 mm turning height: 2650 mm workpiece weight: 100 t max. torque on the faceplate: 178,4 kNm faceplate speeds from - to: 1,8- 80 U/min feed stepless: 0,1 - 6000 mm/min z-axis: 1500 mm Control: Siemens 880T drive motor: 100 kW ram head dimension: 300 x 300 mm x-axis: R: 2500 / L: 2500 mm y-axis: 2900 mm z-axis: R: 200 / L: 1500 mm ram head dimension: 300 x 300 mm total power requirement: 69 kW weight of the machine ca.: - t dimensions of the machine ca.: 17,5 x 10.5 m - CNC control Siemens 880T - Coolant system - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2500 mm swing diameter over bed slide: 1400 mm turning length: 6000 mm Distance between centres: 5740 mm centre height: 1250 mm faceplate turning speed range: 4 - 400 U/min rapid traverse:: 200 mm/min faceplate: 2000 mm spindle bore: 200 mm face feeds: 700 mm upper slide-adjustment: 350 mm tailstock quill diameter: 320 mm max. workpiece weight between centres: 40 t Control: Siemens Sinumerik 8 T drive motor: 95,5 kW total power requirement: 125 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 11,5 x 3,5 x 3,5 m Heavy duty high precision horizontal lathe with: - CNC Control Siemens Sinumerik 8T (CNC 6 axes) - 3-way Bed - hydraulic clamping system Rohm - Machine modified with 2000 mm face clamping plate - slide with two working positions - Sauter 4 side tool holder - circular turning unit - tailstock - chip conveyor - Rexroth Hydraulic suitable for both,  ...

Key data: 330 mm, 635 mm

Stock No.: 4042 LATHE Manufacturer: COLCHESTER, Type: STUDENT 2500 Serial No.: 307802, Year of manufacture: 2010 Specifications: Turning length 635 mm Center height 165 mm Turning over bed 330 mm Ø Spindle bore 40 mm Ø Spindle speeds 40-2500 rpm Spindle motor power 2.2 kW Accessories:                             Cooling water system                    Multi-Tool Holder                Various Tool Holders 2 pc Centering chuck                      Dimensions: Length: 2200 mm, Height: 1500 mm, Width: 1100 mm, Weight: 800 kg

Offer 26312 Technical data: - Largest circulation - Ø over bed 550 mm - via flat slide 310 mm - Turning length approx. 1500 mm - Travels - Z – axis 1600 mm - X – Axis 300 mm - Spindle holder according to DIN - Spindle bore 82 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 150 mm - Spindle speeds 80 - 3500 rpm - Rapid traverses X / Y - Drive 17 kW - with: - CNC control FAGOR - Hydr. Chuck clamping - electr. Handwheels - 8-fold tool station - man. Tailstock - Coolant device - Space requirement approx. W 4400 x H 2100 x D 2300 mm - Weight approx. 4400 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Handover: in its current condition as inspected -Condition: Problem with the lead screw -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Bulharian ZMM lathe C11MT/1500

Daewoo Puma V 550Year of manuf. : 2001 Control : Fanuc 18i-T Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 18i-TMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpChuck:3-jaw chuck

Daewoo Puma V 550Year of manuf. : 2005 Control : Fanuc 21i-TB Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 21i-TBMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpTool measurement:Renishaw tool setterChuck:SMW Autoblok 3-jaw chuck

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 5000 mm spindle speed:: 1.6 - 315 U/min spindle motor: 75 kW spindle bore: 105 mm tailstock quill diameter: 280 mm quill stroke: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t feed: 0,18 - 160 mm/U thread - mm pitch: 1 - 192 mm thread - inch: 30 - 1/8 inch. total power requirement: - kW weight of the machine ca.: 38 t dimensions of the machine ca.: 10,7 x 2,2 x 1,9 m Fitted with: - DRO - Chuck, 1250 mm diameter - Tailstock - 2 centres - Removable grinding unit - Milling unit with ISO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conventional lathe Trens SN 710s BJ 2003

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-22

FANUC Series 32i-MODEL B control, with bar feeder TOP AUTOMAZIONI XF365 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-20

The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-256

DL-35M motorized turret, FANUC Series Oi-TF control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-13

12-position turret, 500GH spindle, MORI SEIKI MSD-501II control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-14

FANUC Series 18i-TB control, with TOP AUTOMAZIONI FU350SX bar feeder - year 2024 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-21

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-309

HEMPEL CKE semi-auto lathe 20 Long. max 2000 mm, max Ø 250 mm. Manual/auto controls, longitudinal carriage, 3-jaw chuck. Robust construction for wood or metal turning, suitable for prod. medium. Reliable and versatile machine. Auction-ID: A1-50215-39

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-24

FANUC Series 18i-TB control, IEMCA AUTOMATA 2.5 loader robot - year 2010 AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-23

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50066-454

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-251

engine lathe, year 2007, CNC 840 D. Used machine. More info & price on IndustrialBuyer.

Traub TNK 65Year of manuf. : 2016 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):35 kWTorque (max.):120 NmBarcapacity:65 mmWorkpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:Motor spindle, integrated in tool carrier IISpeed:7.000 rpm:Power (max.):12 kWTorque (max.):22,5 NmChuck:Hainbuch Spanntop Kombi Axfix Gr. 42Toolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmToolcarrier II (X/Y/Z):Technology:Turret with 9 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmBackworking attachment:Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron)Driven Tools:5 stationsTooldrive:12.000 U/min, 6,7 kW, 5,3 NmEquipment/Accessory:Positionsensor:Direct Sca ...

sliding headstock CNC lathe, year 2015, 2368 operating hours, CNC 31i-MODELB. Used machine. More info & price on IndustrialBuyer.

Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi Ø over saddle: Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T

Additional technical specifications: • swing diameter over bed: 320 mm • swing diameter over slide: 150 mm • face slide: 185 mm • turning spindle bore diameter: 50,8 mm • spindle diameter at front bearing: 85 mm • tailstock quill diameter: 70 mm • quill taper: MK 5

Additional technical specifications: • Center distance over bed: 120 mm • Center distance over support: 60 mm

Additional technical specifications: • Center height over support: 80 mm • Center height over bed: 150 mm • Center Length: 450 mm

Equipped with chuck Forkardt; chuck diameter: 250 mm; equipped with digital reading unit; tailstock mount: MK4; machine is technically in good condition Auction-ID: A1-49785-11

Chuck diameter : 125 mm; tailstock holder MK2; machine is technically in good condition Auction-ID: A1-49785-5

Consisting of 2 x base body 150 x 150 mm; Including 6 type B chisel holders, length approx. 118 mm; unused Auction-ID: A1-49785-97

Equipped with frequency control and digital readout unit; including chisel support; tailstock mount: MK3; machine is technically in good condition Auction-ID: A1-49785-1

Consisting of 2 x base body 130 x 130 mm; Including 7 type B chisel holders, length approx. 118 mm; unused Auction-ID: A1-49785-96

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

General Description Conventional vertical turning lathe manufactured by POLYMETA C LTD in Sofia, Bulgaria. Model SEDIN 1512 , designed for machining large cylindrical workpieces, rings, flanges, wheels and similar rotational parts. The machine layout matches the SEDIN 1512 family. Technical Details Manufacturer: POLYMETA C LTD Model: SEDIN 1512 Type: Vertical Turning Lathe (VTL) / vertical turret lathe Year of refurbishing: 2001 Factory No.: 3524 Control: Conventional (manual) Condition: Used Condition Good industrial used condition. The machine appears complete and installed in production. Ways and machined surfaces look clean, handwheels and graduations show limited wear, and fresh lubrication is visible. The tool slide appears in good condition, with no obvious crash damage. Normal cosmetic paint wear and age-related wear are visible. Spindle accuracy and gearbox condi ...

turning diameter over bed: 2300 mm turning diameter over slide rest: 1100 mm turning length: - mm faceplate: 2000 mm centre height: 1180 mm max. workpiece weight -without tailstock: 4 t spindle diameter in front bearing: - mm spindle turning speed range: 1- 99,9 U/min feed: 0,06 - 19,98 mm/U rapid traverse: 2,3 m/min total power requirement: 37 kW weight of the machine ca.: - t dimensions of the machine ca.: 5,2 x 5,8 x 2,63 m equipped with: - face plate - Bed support with 4-point Tool Holder - Coolant system - Feed/chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4500 mm swing diameter: 6000 mm turning height: 3500 mm Control: Siemens 840D distance between columns: 6500 mm column: max. travel: 19000 mm table load: 63 tons table rotation speed: 0,63 - 63 U/min cross-rail support horizontal: 7500 m/min cross-rail support vertical: 2500 m/min clamping table: 8000 x 5000 x 350 mm table load capacity: 25.000 kg/qm ram head dimension: 460 x 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GANTRY – Double-column milling and turning centre with movable column Retrofitted and modernised in 2009 - Siemens 840D CNC control - Drilling and milling unit, speeds 25 – 2,500 rpm - Workpiece table 8,000 x 5,000 mm - Rotary table/face plate 4,500 mm - Angular milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5000 mm swing diameter: 5500 mm turning height: 3500 mm max. ram stroke: 1800 mm faceplate turning speed range: 0,5 - 50 U/min workpiece weight: 20 t feed per revolution: 0,056 - 4,25 mm rapid traverse: 2 m/min Control: Sentrol total power requirement: - kW weight of the machine ca.: - t - Sentrol CNC control system - Faceplate - 2 vertical ram supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: TOS Model: SKIQ 8 Year: 1960 Condition: Used Stock number: 9540 Clamp plate diameter: 800 mm Max. workpiece height: 700 mm Max. workpiece weight: 2500 kg Weight: 16000 kg

Manufacturer: ČKD Blansko Model: SK 25 A Year: 1960 Condition: Used Stock number: 9539 Max. turning diameter: 2500 mm Clamp plate diameter: 2400 mm Maximum workpiece weight: 14000 kg Max. workpiece height: 1600 mm Weight: 47000 kg

Technical data Manufacturer: WOHLENBERG Type: V1250 Year of Make: 1980 Serial Number: D4195 Grinding length: 8,000 mm Spindle Passage: 100 mm Face plate: Ø 1,000 mm Control: Siemens Sinumerik PLC Configuration Tailstock Bezel Face Plate Control panel with touchscreen Suction Auction-ID: A7-50461-28

Turning diameter max. 390 mm Turning length max. 572 mm Control MSD 501 Circumferential diameter over bed 700 mm Circumferential diameter over face slide 560 mm Distance between tips 725 mm Standard turning diameter 248 mm max. turning diameter 1: 390 / 2: 260 mm Main spindle: Speed range - main spindle 35 - 3,500 min/-1 Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A2-8 Spindle bearing diameter 130 mm Spindle bore 86 mm Usable rod diameter 62 mm Travels: x-axis 1: 238 / 2: 173 mm z-axis 1: 650 / 2: 650 mm Tool turret: Number of turrets 2 Number of tool positions 10 + 8 pos. Number of driven tool stations - pos. Switching time 0.3 sec Shaft diameter 25 mm Shank diameter of the drills max. 50 mm Tailstock: Tailstock travel 500 mm Quill diameter 110 mm Tailstock mount MK 5 Quill stroke 150 mm Feeds: Rapid traverse X1/2: 18 m/min Rapid traverse Z1/2: 24 m/min Fee ...

Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Tip width 2m Turning diameter of tip parts : Ø 700 x 2035 mm (above bed Ø 900) Turning diameter of chucks : Ø 800 x 500 mm Bezel, self-centering : Ø 35 to 240 mm Tool turrets : 12 tools Main spindle drive / gearbox : 2 stages, 1400 rpm, 37 KW Incl. chip conveyor, tailstock, tool turret & other accessories Auction-ID: A7-50270-5

Accessories for Leadwell LTC-50CL CNC Lathe Shelf content, without shelf Auction-ID: A7-50270-6

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type Al.Pin 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

It is a new CNC replacement control for Tornos Bechler type TBS 364 sliding head automatic lathes. Auction-ID: A1-50529-515

It is a new CNC replacement control for Tornos Bechler type TBS 364 sliding head automatic lathes. Auction-ID: A1-50529-516