single spindle lathe used for sale

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

Key data: 125 t

Single-column press – manufacturer Durendus – 125 t servo press – table 2200 × 750 mm For sale is a hydraulic C-frame servo press from the manufacturer Durendus with an adjustable press force of up to 125 t and an integrated 50 t ejector. Thanks to modern servo hydraulics, the machine offers significantly reduced energy consumption of up to 40% compared to conventional systems and is ideal for demanding assembly, forming and production processes. = Technical data + information: Hydraulic servo press – C-frame – 125 t General information - Manufacturer: Durendus - Model: Single column press / servo press - Type: C-frame press Laobqcjx Aqtqotxvoa - Press force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm Table &  ...

Offer 25272 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2000 kg

pressure: 230 t throat: 345 mm stroke: 40-160 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 1000x660mm mm ram surface: 700x500 mm table height: 800 mm tool hole in ram: Ø65 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 t, 600 mm

Length 0.64 m Width 0.84 m Height 2.20 m Weight 250 kg Color: Blue Press pads Mandrels

Wood Shredder BHS Manufacturer: Type: NGU 0513 Year of Make: 2017 Betriebst. 12000 h Knife: Rotor diameter 495 mm with 87 knives Hopper 14 cbm Screen baskets 20mm 30 mm Control cabinet Weight: 9500 kg L-2.75m B-3.25m H-1.75m Inlet: 2.20 x 0.50 m Location: Salzgitter Price ex location 49,000,-- Euro plus VAT I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 ( WhatsApp )

pressure: 25 t throat: 250 mm stroke: 400 mm table surface area: 600x480 mm ram surface: Ø135 mm table height: 980 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20 t

20T Durendus C-Stand Assembly & Small Batch Press For sale is a C-column assembly and small series press from the manufacturer DURENDUS with a maximum press force of 20 T. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for assembly work, small series production, press-fit work and straightening processes in industrial use. Technical data + information: C-Stand Assembly & Small Batch Press – 20 T – 700 × 920 mm General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Crimping head: Ø 100 mm - Table height from the ground: 1,000 mm - Overall dimensions (WxDxH): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or accordin ...

Offer 26149 Technical data: - Compressive force 125 t - Projection 340 mm - Table size approx. 1000 x 680 mm - Diarrhea hole in the table approx. 300 x 200 mm - Largest installation height approx. 500 mm - Tappet area approx. 600 x 300 mm - Peg hole in the tappet 50 mm - Plunger adjustability 75 mm - Stroke adjustment 20 - 180 mm - Stroke rate 80 1/min - Light barrier - Hydraulic clutch - Pneumatic dampers - Two-handed operation - Central lubrication - Separate control cabinet with control units - Pneumatic connection 6 bar - Drive 400 V / 16.5 kW - Space requirement approx. W 1700 x H 2900 x D 2700 mm - Weight approx. 9400 kg

Key data: 15 t

C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 t. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm and a stroke of 250 mm, making it suitable for press-fit work, assembly processes and small series production in industrial use. Technical data + information: General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Total height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Total depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guide: 2-fold Hydraulic cylinders - Stroke: 0–250 mm - Working pressure: 250 bar - Start-up speed: 17 mm/s  ...

Doppstadt Büffel DW-3060 BioPower Type D with recirculation HS-401. Year of manufacture 2015, 6877 operating hours. The shredder served as a replacement device and is in good condition. Only wood and green waste were processed with it.

Powerful, little-used pre-shredder for cables and other materials. Workshop tested and with 12 months used machine warranty. Adjustable cutting gap for consistent performance. Low tendency to bridge formation thanks to two vertical funnel walls. Rotor cover for better sensitive control. Pre-installation for cooling the rotor shaft from the inside. Hourly output up to approx. 500 kg (depending on the material and screen size) Drive 19.5 + 2.5 kW, 400 V The machine can be viewed and tested. more information at Recyclinganlagen.info

Komptech Terminator # 481148 Facilities Terminator 5000 D T4F/Stage V EU Declaration of Conformity Terminator 5000 spec. Hook/Trailer Engine Oil Drain C13/C18 Trailer Connect! Roller TM-F 32 Teeth Counter comb TM-F armored Labyrinth Waterproofing HD Discharge belt 6.5 m Overbelt magnet Trailer Slip-on shoe 50mm incl. safety device E-air compressor for supply trailer Trailer drive-up device Wireless remote control Central lubrication Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

diameter range 2-7 mm shaft length under head 120 mm cutting length 140 mm output - pieces/min 300

Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details.

Available for sale is a high-quality Europool single deck tunnel pasteurizer, manufactured in Italy in 2022. The machine is designed for the continuous pasteurization of beer in 330 ml glass bottles at a nominal capacity of 24,000 bottles per hour. The pasteurizer is constructed in hygienic AISI 304 stainless steel and comprises a 17-metre treatment tunnel with seven process zones. The thermal cycle includes first and second heating, pre-pasteurization, pasteurization, and three controlled cooling stages. Automatic temperature regulation and an integrated Pasteurization Unit control system ensure consistent product treatment and help prevent over-pasteurization during production interruptions. Energy recovery between selected heating and cooling zones reduces utility demand and improves overall process efficiency. The machine is equipped with recirculating water tanks, double-filtered  ...

11072026 Tunnel Pasteurizer Single Deck PETEK 15,000 Containers per Hour (2017) Available for sale is a PETEK single deck continuous tunnel pasteurizer, manufactured in Slovenia in 2017. The machine is designed for the controlled pasteurization of filled and closed beer cans and glass bottles and has a maximum nominal capacity of 15,000 containers per hour. The pasteurizer uses recirculated spray water to gradually heat, pasteurize and cool the containers as they pass through the machine. The process is automatically controlled through a Siemens PLC and HMI system, while PETEK Dynamic Active PU Control maintains accurate pasteurization levels and reduce the risk of over-pasteurization during production interruptions. The machine is built in five stainless-steel modules, making dismantling, transport and reinstallation more practical. With its wide 3,000 mm product conveyor, eight wat ...

CONTROLS   PLC SIEMENS SIMATIC PANEL PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 400 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1300 mm SLIDE   stroke: 700 mm DIE CUSHION (TABLE CUSHION)   stroke: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1100 mm Machine hours: 14060

Offer 26185 Technical data: - Max. pressing force 160 t - Max. ram stroke approx. 500 mm - Average working speed approx. 92 mm/s - Return speed 125 mm/s - Installation height approx. 1000 mm - Projection to the middle of the ram 360 mm - Plunger clamping pin 40 mm - Table size 900 x 630 mm - Table bore / breakthrough 220 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 17 kW - Space requirement approx. W 1150 x H 3400 x D 1850 mm - Weight approx. 7500 kg

pressure: 28.0 t throat: 225 mm stroke: 150 mm table surface area: 325 x 300 mm work speed: 2.0 - 9.8 mm/sek return speed: 12.8 mm/sek total power requirement: 4.0 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE

Year: 2017 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - hydraulic feed brake - pressure reducer

JENWAY SP-400-BIO Series 72 Single-Beam UV/Visible Spectrophotometer New equipment in its original packaging Brand : COLE PARMER Spectral Range: UV/Visible Model 7200 BIO Range (nm): 198 - 800 nm Light Source: Xenon Lamp Accuracy: ± 2 nm Repeatability: ± 2 nm Diode strip Spectral band: 3 nm Power supply: 12 V DC, 3.8 A Dimensions (W x D x H): 212 x 422 x 120 mm Weight: 2.8kg

Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg

With stainless steel X-Station , serial no. 29798327, y.o.m. 2024, 230V and stainless steel platform ladder XDR-1000 Auction-ID: A1-48959-14

With stainless steel X-Station , serial no. 29798328, y.o.m. 2024, 230V. Auction-ID: A1-48959-15

Solder Paste Mixer Single Paste Glass Mixer From Refrigerator to Screen Printer in Less Than 15 Minutes Connection Voltage: 230 VAC Auction-ID: A7-49816-124

SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) Auction-ID: A7-49816-135

Single pump hydraulic unit Auction-ID: A7-49925-19

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090303004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090520004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-column press - With table base - Various press accessories Pressure 2 t Projection 150 mm Stroke 150 mm Table surface 310 x 250 mm Drive power 2.0 kW Machine weight approx. 0.6 t Dimensions approx. 1.2 x 0.8 x 1.7 m Condition: unchecked (6) Auction-ID: A7-50084-44

Offer 26244 Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 400 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Plunger clamping surface 530 x 460 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table bore / breakthrough 180 mm - Table height above floor 700 mm - Oil capacity approx. 300 ltr - Drive 380 V / 11 kW - Space requirement approx. W 1150 x H 3100 x D 1750 mm - Weight approx. 4300 kg

Offer 26245 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil capacity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 2980 x D 1850 mm - Weight approx. 4600 kg

Serial Number: A22-29109743-001 Output: 4-20 mA Power supply: 12.5 to 42.4 VDC Software Version: SWVER 1.29 Certification: ATEX / Ex Auction-ID: A1-49997-115

AGICOM Recycling Machines

1 toilet; 1 sink; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5889 Auction-ID: A1-50092-45

1 toilet; 1 sink; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5889 Auction-ID: A1-50092-46

With protective covers and conveyor belt on pallet; 2463 Hours Auction-ID: A1-48986-9

Includes impact wrenches in stitch and ring; various sizes; approximately 40 pieces in total Auction-ID: A1-49785-385

Brand Rollepaal B.V. Type A-Rex 90-33 Type nr E309.0001 Screw Single Screw diameter 90 mm l/d 33 D Serial No. 230/400 Year of manufacturing 2001 Auction-ID: A1-50242-11

Ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Right-hand version Workpiece dimensions: max. length 3000 mm, min. 250 mm, max. thickness 100 mm, min. 30 mm, width 200 mm Overhead cutting saw, 3 kW, 3000 rpm, manual horizontal movement over 120 mm, 400 mm blade, cutting height 100 mm 1 vertical shaft, 340 mm long, 40 mm diameter, 7.5 kW, 3100 rpm, suction port with 150 mm diameter (x2), max. tool diameter: 320 mm Carriage with pneumatic clamping 1100 x 500 mm table Stop, positioning from -45? to 45? Motorized carriage with electronic control 2-32 m/min

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22