141,784 used machines on RESALE, but how to find them? Machine Search
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single limit switch EUCHNER N1AD514 10 A 250 V IP67 spare part e.g. for TRAUB TND300 ! used ! Dimensions: 100 x 30 x 80 mm
Single limit switch BALLUFF BNS 819-FD-60-101 ( BNS819-FD-60-101 ) BNS0003 DIN 43693 0930HU spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 105 x 30 x 70 mm
Carriage 3,80 m. Motor power: 7,5 kW Saw-blade tilting: 0° bis 45° Cutting height: max. 157 mm with sawblade Ø 500 Rotational speed: 3000 - 3600 - 4200 rpm Cutting width: 1300 mm Scorer with 2-axes electrical positioning Ripfence with motorised postioning
Carriage 3,30 m. Motor power: 5,5 kW Saw-blade tilting: 0° bis 46° Cutting height: max. 87,5 mm with sawblade Ø 315 Saw-blade diameter: 250 - 400 mm Rotational speed: 4000-4800-6000 rpm Cutting width: 1250 mm Scorer with 2-axes electrical positioning Ripfence with motorised postioning
Table: 825 x 1140 mm Extendable workpiece support Spindle diameter: 50 mm Spindle length: 210 mm Vertical spindle travel: 190 mm Maximum profiling tool diameter: 200 mm Maximum tenoning tool diameter: 320 mm Motor 5.5 kW Incl. side-mounted tenoning carriage 5 speeds: 3500 - 6500 - 8000 - 10000 rpm
21x box Nexans single core cable 0.5mm 100mtr Auction-ID: A1-50936-64
Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details.
In-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,0,0,000 2 l/min p: 30 bar motor: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm
Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg
faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.
Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991
Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001
Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003
Manufacturer: Homag, Type: KLO 76, Year: 1994, Min-max edge material mm: 0,5-3,0, Min.-max. workpiece length in mm: 150, Edgeband height max mm: 55, Min-max feed m/min: 10-25, Premilling: no, IR zone: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, radius milling: yes, 4 motors: yes, Radius scraper: yes, Flat scraper: yes, 4 motors: yes, Ersatzverleimteil : yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: yes, Roller/belt: Riemen, Compressed air bar: 6, Machine lenght mm: 7500, Noise enclosure: yes, Year :1994
Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008
Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,
Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990
Wolfking single shaft paddle/ribbon mixer, type: SSM 4000, inside dimensions: 1950 mm x 1350 mm x 1020 mm, total dimensions: 3510 mm x 1920 mm x 2750 mm.
galvanized frame, 160 liters Auction-ID: A1-40422-452
galvanized frame, 160 liters Auction-ID: A1-40422-99
Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002
Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012
Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,
Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
maximum number of results exceeded
please refine your search
100 € 
