single belt used for sale

Conveyor belt / conveyor belt 3 pcs. - Length approx. 9,000 mm - Width: 300 mm ------------------------------------ Conveyor Belt / transportation belt 3 pcs. - Length: approx. 9,000 mm - Width: 600 mm

Conveyor Belt / Conveyor Belt - With blue Clean Drive belt - Length: approx. 5,250 mm - Belt width: approx. 305 mm - With geared motor --------------------------------- Conveyor belt / transportation belt - With blue clean drive belt - Length: approx. 5,250 mm - Belt width: approx. 3005 mm - With gear motor

Conveyor Belt / Conveyor Belt - With blue Clean Drive 2" strap with carriers - Length: approx. 8160 mm to 8360 mm - Belt width: approx. 305 mm - With geared motor ------------------------------------------------------ Conveyor belt / transportation belt - With blue clean drive belt with 2" high catch - Lngth: approx. 8,160 - 8,360 mm - Belt Width: approx. 305 mm - With gear motor

Conveyor belt / conveyor belt / high conveyor / downward conveyor - Length: approx. 3,050 mm - Belt width: approx. 400 mm - With geared motor - Plastic link belt with curved carriers 100 mm high ---------------------------------------------------------------------- Conveyor belt / transportation belt / high conveyor / down conveyor - Length: approx. 3-050 mm - Belt width: approx. 400 mm - With gear motor - Platic link conveyor belt with bended catch 100 high

Conveyor Belt / Conveyor Belt - Length approx. 6,500 mm - Belt width: approx. 465 mm -open design - Without side guide - Drum drive - Plastic link belt -------------------------------- Conveyor Belt / transportatio belt - Length: approx. 6,500 mm - Belt width approx. 465 mm - Open execution - Without directional control - Drum drive - Plastic link conveyor belt

Conveyor Belt / Conveyor Belt - Length: approx. 9,220 - 9,320 mm - Belt width: approx. 305 mm - Gear motor - Plastic link belt ----------------------------------- Conveyor belt / transportation belt - Length: approx. 9,220 - 9,320 mm - Belt width: approx. 305 mm -Gear motor - Plastic link conveyor belt

Conveyor Belt / Conveyor Belt - Length: approx. 3,000 - 3,100 mm - Belt width: approx. 305 mm - Gear motor - Plastic link belt ------------------------------ Conveyor belt / transportation belt - Length: approx. 3,000 - 3,100 mm - Belt width: approx. 305 mm - Gear motor - Plastic link conveyor belt

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt -Manufacturer: IMEC, conveyor belt conveyor belt housing VA with adjustable guide rails -Type: ST 340X2000 -Speed: Drive shaft 290 rpm -Conveyor belt rollers: Ø21 x 340 mm -Conveyor belt length: 2000 mm -Drive: ABB 0.37 kW -Total dimensions: 2010/500/H980 mm -Weight: 85 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 2 rollers -Type: VICO FLEX-127-274-14-SF -Material: AISI 304 -Width: 457 mm -Length: 10 m / 17.56 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 1200/800/H740 mm -Total weight: 113 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel -Type: VICO FLEX -Width: 455 mm -Length: 9700 mm -Number: 3 rolls available -Price/Distribution: per roll -Transport dimensions: 600/370/H370 mm -Weight: 62 kg/unit

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 1 roll -Type: VICO FLEX -Width: 457 mm -Length: 18.29 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 800/457/H630 mm -Weight: 75 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 4 rollers -Type: VICO FLEX -Width: 460 mm -Length: 10 m / 8.170 m / 8.830 m / 10.5 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: -Total weight: 225 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 455 mm -Length: 5 m / 8.930 m / 12.860 m -Height: 10 mm -Submission/Price: complete -Transport dimensions: 1200/800/H420 mm -Total weight: 150 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 1065 mm -Length: 25 m / 16.62 m / 25.14 m, Weight: 370 kg / 246 kg / 372 kg -Height: 15 mm -Submission/Price: complete -Transport dimensions: 2350/1265/H940 mm -Total weight: 1100 kg

Pallet stacker / de-stacker, plastic belt, belt width: 800 mm, total dimensions: 1850 mm x 1550 mm x 2000 mm.

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Used single stage homogeniser made by Hoyer Pack. Capacity 600 L/H. Bal type valve. 6.5 KW motor. Set of seales and plungers ware changed lately. New 1996.

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Accessories

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Complete extrusion line with foster, dispense, extrude, granulate, plummeting to sell. Extruder: Abdullah one shaft extruder, 62 kW motor, suitable for 100-200 kg / h ABS, ASA, PP, 2001. Dosage: A main scale integrated for flakes or granules Cigynvipu Granulation: strand dryer Scheer what 100 BJ. 2002, Stranggranulierer Scheer SGS 100 E4, year 2006 Vacuum pump: Eigenbau Also available: grading sieve, granulate conveying blower, complete steel bagging Tower

380 V, 50 Hz, 0.37 kW, interference test 18 W

Collar shelving, single-sided, 3 m height, 1, 20 m arms, 500 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.150.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 500 kg = 2,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor.

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Rod lathes Thiel

Condition: Very good condition Available: Immediately

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

Index HE 25 with rod feed hydraulically controlled with long turning device

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26