134,878 used machines on RESALE, but how to find them? Machine Search
Offer 26244 Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 400 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Plunger clamping surface 530 x 460 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table bore / breakthrough 180 mm - Table height above floor 700 mm - Oil capacity approx. 300 ltr - Drive 380 V / 11 kW - Space requirement approx. W 1150 x H 3100 x D 1750 mm - Weight approx. 4300 kg
Offer 26245 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil capacity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 2980 x D 1850 mm - Weight approx. 4600 kg
Includes impact wrenches in stitch and ring; various sizes; approximately 40 pieces in total Auction-ID: A1-49785-385
There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.
Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers
Right-hand version Workpiece dimensions: max. length 3000 mm, min. 250 mm, max. thickness 100 mm, min. 30 mm, width 200 mm Overhead cutting saw, 3 kW, 3000 rpm, manual horizontal movement over 120 mm, 400 mm blade, cutting height 100 mm 1 vertical shaft, 340 mm long, 40 mm diameter, 7.5 kW, 3100 rpm, suction port with 150 mm diameter (x2), max. tool diameter: 320 mm Carriage with pneumatic clamping 1100 x 500 mm table Stop, positioning from -45? to 45? Motorized carriage with electronic control 2-32 m/min
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Technical data Manufacturer: KONE Type: Single girder overhead crane (crane 87) Capacity: 40/10/10 t Wingspan: 16 m Inventory No.: 0602-72-87 Configuration Drum crossbeam, load capacity 40 t 2 auxiliary hoists, load capacity 10 t each Crane control Auction-ID: A7-50461-16
Souffleuse électrique PLASTIBLOW PB1E/S E42/24 simple poste Année : 2008 Diamètre vis extrudeuse : 42mm Rapport L/D vis : 24 Capacité : 1L Puissance du moteur de l'extrudeuse : 22KW Puissance de chauffage de l'extrudeuse : 4,1KW Zones de chauffage : 3 Ventilateurs de refroidissement extrudeuse : 2 Capacité de plastification avec du PE : 24kg/h Capacité de plastification avec du BFPE : 26kg/h Heures de fonctionnement : 8 000h Double tète entraxe 100mm (2 x 500ml)
VC999 single-chamber vacuum packaging machine – pre-owned, Mobile single-chamber vacuum machine from VC999 (Inauen Maschinen AG, Herisau, Switzerland), stainless steel floor model on castors with an oil-lubricated VACFOX rotary vane pump., Key features, - One spacious vacuum chamber with a raised filling plate to set the product height, - Seal bar across the full chamber width, suitable for bags up to the full width of the chamber, - Oil-lubricated VACFOX rotary vane pump: deep final vacuum and a long service life, - Mobile floor model on castors, easy to move around the production floor, - All-stainless housing, built to take daily cleaning, - Digital control with programme memory: vacuum, seal and venting times stored per product, Applications, - Meat and cured meats, - Fish and seafood, - Cheese and dairy, - Ready meals, - Butchers, fish processors and foodservice, Benefits, - Exten ...
Lot of various optics for LED floodlights Auction-ID: A1-48746-285
Champion CT28 – Single-face corrugating line Year: 2017 Working width: 1,650 mm Single-face corrugated-board production in sheets and reels Equipment: 2 hydraulic roll stands and 2 automatic splicers 2 preheaters and 1 single facer Storage bridge and conveyors Inline slitter with winder Slitting/cross-cutting unit for sheets Included flute profiles and format range on request. Reference: PP-38155 Further information on request.
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-250
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-253
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-384
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-385
Single-phase version Engine power: 4 kW Hourly production: about 30 to 50 kg depending on the material used Integrated control cabinet with amperage tracking Control panel with: Ammeter Voltmeter Emergency stop button (E-STOP) Start/Stop Buttons Electric motor with direct drive Power supply: 230 V single-phase Metal feed hopper Auction-ID: A1-50704-402
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-387
Lot of 7 Siemens SIMATIC TOP CONNECT front connector assemblies with single cores. Visible variants include 6ES7922-3BC50-0AB0 (20 × 0.5 mm², screw connection, cable length 2.5 m) and 6ES7922-3BD20-0UC0 (40 × 0.5 mm², screw connection, cable length 3.2 m). Boxes and connectors show production date 10/2013. Made in Germany. Auction-ID: A7-50717-457
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-251
SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) Auction-ID: A7-50729-135
Solder Paste Mixer Single Paste Glass Mixer From Refrigerator to Screen Printer in Less Than 15 Minutes Connection Voltage: 230 VAC Auction-ID: A7-50729-124
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-252
The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-386
Technical data Manufacturer: ERNST KRÖGER Year of Make: 1992 Serial number: 12781 Load capacity: 2 × 8,500 kg Wingspan: 9,000 mm Hoists: 2 Roller rotating crossbar: available, without hook Configuration Single-girder overhead crane, crane 49, with two hoists and roller slewing beam. Auction-ID: A1-50608-143
\"Single-girder overhead crane (crane 56) HAGENER lifting capacity 3,200 kg, rebuilt in 1996, 3.2 t chain hoist, span 12 m, inv. no.: 0601-72-56 Comment: Real estate installation\" Auction-ID: A1-50608-45
Technical data Manufacturer: ERNST KRÖGER Year of Make: 1992 Serial Number: 12564 Load capacity: 2 × 8,500 kg Wingspan: 8,000 mm Trolleys: 2 Roller crossbar: available Configuration Single-girder overhead crane, crane 46, with two trolleys and roller crossbeam. Auction-ID: A1-50608-145
Technical data Manufacturer: ERNST KRÖGER Year of Make: 1990 Serial Number: 12623 Load capacity: 2 × 8,000 kg Wingspan: 8,000 mm Trolleys: 2 Roller crossbar: available Configuration Single-girder overhead crane, crane 47, with two trolleys and roller beam. Auction-ID: A1-50608-144
Very clean unbraked single-axle box trailer of 2m by 1.1 m / just new tyres and rims, the spare wheel is also new / working lighting / ready for immediate use Auction-ID: A3-46132-6504
RATIONAL iCombi Pro XS 6-2/3 single-phase electric combi oven, refurbished by the manufacturer. Capacity for 6 GN 2/3 trays per unit. Suitable for steaming, hot air and combined steam cooking. Equipped with intelligent climate control, automatic cooking programs and iCareSystem automatic cleaning system. Stainless steel interior and exterior construction. Approximate dimensions per unit: 655 x 621 x 594 mm. Approximate net weight: 62 kg per unit. Single-phase power supply. Serial number provided: E60SJ22072984627. Reference: CA1ERRA.0004138. Auction-ID: A7-50721-75
RATIONAL iCombi Pro XS 6-2/3 single-phase electric combi oven, refurbished by the manufacturer. Capacity for 6 GN 2/3 trays per unit. Suitable for steaming, hot air and combined steam cooking. Equipped with intelligent climate control, automatic cooking programs and iCareSystem automatic cleaning system. Stainless steel interior and exterior construction. Approximate dimensions per unit: 655 x 621 x 594 mm. Approximate net weight: 62 kg per unit. Single-phase power supply. Serial number provided: E60SJ22072984627. Reference: CA1ERRA.0004138. Auction-ID: A7-50721-23
Including 2x height 1600mm and 1x height 1770mm Auction-ID: A1-50226-107
Load capacity 8,000 kg, excluding rails Auction-ID: A7-50851-19
Load capacity 8,000 kg, excluding rails Auction-ID: A7-50851-18
Load capacity 16,000 kg, excluding rails Auction-ID: A7-50851-17
1 toilet; 1 sink; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5889 Auction-ID: A1-50865-45
1 toilet; 1 sink; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5889 Auction-ID: A1-50865-46
A hemp palm, presumably Trachycarpus fortunei, is offered in a black plastic pot. The palm has a single trunk and numerous green, fan-shaped leaves. It is suitable for greening terraces, courtyards, entrance areas, conservatories or sheltered outdoor areas. Technical data: Plant: Hemp palm Probable species: Trachycarpus fortunei Height: approx. 140 cm Version: single-stem Leaves: fan-shaped, green Pot: black plastic pot Condition: apparently vital, with partly slightly dry leaf tips The plant sign indicates a hardiness of up to about -20 °C. This information is only for orientation and must be checked independently before use or planting. The actual frost tolerance depends, among other things, on the age of the plant, the location, the moisture, the root protection and the winter protection. Information on location and care, especially sun to partial shade, should also be checked yo ...
press pressure: 1000KN, punching surface approximately: 2x L900 x W720 mm, equipped with motor-driven roller conveyor, 1x support infeed table, 1x oil pump generator, motor power: 7.5 KW, 1x Sigmatek ET 243 operator panel, 1x mobile extractor, and personal fencing protection with Sick laser curtain protection. Includes rack filled with leather dies and 2x green plastic plate Auction-ID: A1-50060-9
Transport trailer designed for the safe transport of a wide range of loads. Thanks to the 40 cm high side boards and the folding front and rear boards, loading and unloading is quick and easy. The welded construction guarantees high durability, while the tilting drawbar increases user comfort. Bumpers on the rear frame ensure that the trailer can be placed stably on the rear board, so that it takes up only minimal space during storage. By removing the side boards, the trailer can easily be transformed into a transport platform, increasing versatility. Optional equipment includes double side boards, mesh side boards, a flat tarpaulin and a canopy frame. Auction-ID: A3-46136-17644
JENWAY SP-400-BIO Series 72 Single Beam UV/Visible Spectrophotometer; ; New equipment in its original packaging; ; Brand: COLE PARMER; Spectral range: UV/visible; Model 7200 BIO; Range (nm): 198 - 800 nm; Light Source: Xenon Lamp; Accuracy: ± 2 nm; Repeatability: ± 2 nm; LED strip; Spectral band: 3 nm; Power supply: 12V DC, 3.8A; Dimensions (W x D x H): 212 x 422 x 120 mm; Weight: 2.8kg; ; Internal reference: FA-2541; Auction-ID: A1-50994-1109
maximum number of results exceeded
please refine your search
190 € 
