126,611 used machines on RESALE, but how to find them? Machine Search
Key data: 50 mm, 30
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time
Key data: 35 mm, 25 , 107 U/min
used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available
Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...
Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.
Single shaft shredder with 1350 mm shaft, hopper 1350 x 1100 mm, motor 37 kW, all bearings new. Extremely robust construction. Slow runners.
1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.
Key data: 75 1/min
This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668
Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-fold Year 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Einwalzen-Anleimmaschine / Single Roller Gluing Machine Sumbel ENANO Arbeitsbreite max. 250 mm / Working width 250 mm Kaltleim / Cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic ...
2 pieces single-stage screw tensioning device with replaceable pulling element Thread M 85 and M100 with hydraulic power unit
faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW ...
weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm cross rail - adjustment: 600 mm work spindle adjustment: 750 mm Tools changer for 12 tools: total power requirement: 69 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m reconditioned The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single limit switch EUCHNER N1AD514 10 A 250 V IP67 spare part e.g. for TRAUB TND300 ! used ! Dimensions: 100 x 30 x 80 mm
Single limit switch BALLUFF BNS 819-FD-60-101 ( BNS819-FD-60-101 ) BNS0003 DIN 43693 0930HU spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 105 x 30 x 70 mm
pressure: 230 t throat: 345 mm stroke: 40-160 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 1000x660mm mm ram surface: 700x500 mm table height: 800 mm tool hole in ram: Ø65 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
In-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,0,0,000 2 l/min p: 30 bar motor: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm
Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg
faceplate diameter: 1200 mm swing diameter: 1600 mm turning height: 1250 mm slide adjustment: 800 mm Control: Siemens type: 840 c power capacity: 56 kW : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 mm, 1350 , 298 U/min
Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available
pressure: 100 t throat: 350 mm stroke: 130 mm stroke of worktool slide: 3070 Hub/min ram adjustment: 100 mm ram surface: 500x300 mm table surface area: 1000x600 mm feed - rapid adjustment: total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.
used
HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm
maximum number of results exceeded
please refine your search
