128,883 used machines on RESALE, but how to find them? Machine Search
AGFA / Siemens X-ray imaging workstation DX-D 500 (digital) with the following system components: Generator Siemens Polydoros IT 80 Tube Siemens SV 150/40/80 HC 0.6/1.0_Bj. 2018 Vertical tripod Siemens Vertix T Fa. Siemens 2x detector VARIAN 4343R CSi_43x43cm Workstation • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • T ...
Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...
Siemens Vacuum Contactor 450 Kw Coil 230 Volt Used
Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...
Siemens 6AG4140-3BC04-0PA0 SIMATIC IPC427D (Microbox PC) HD graphic onboard 2x10/100/1000 Mbps Ethernet RJ45 4xUSB V3.0 (high current) PCIe (optional) 24 V DC power supply Core I3-3217UE 2x Gbit Ethernet (IE/PN) DIN rail mounting 4 GB 1x RS-232 without PCIE WIN Embedded Standard 7 32-bit Replaceable without drive SSD 240 GB Standard (MLC) without SIMATIC software New, original sealed box
Siemens Simodrive Spindle Controller MLFB : 6SC 6101-3A-Z
Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I/R Module 6SN1145-1BA01-0BA2 LT module INT.120 A 6SN1123-1AA00-0GA0 LT module INT.2x15 A 6SN1123-1AB00-0AA0 LT Module INT. 15 A 6SN1123-1AA00-0AA0
used
Siemens Somatom Definition Flash, 128 lines, built in 2011, 2 X-ray emitters Straton MX ( DoM 2021 440.000 SS / DoM 2022 installation 2023 87000 SS )
used
Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours
Siemens Compact L c.arm manf. 2007 / Image Intensifier Sirecon 23-2 Software version. 2VD01E Sony B/W printer 2x Flat screen monitor Excellent for EXPORT # welcome to inspect & test #
Siemens PLC SCALANCE X212-2 6GK5212-2BB00-2AA3 RA2287 Manufacturer: Siemens Model: 6GK5212-2BB00-2AA3 Condition: Used Transmission rate: 10 Mbit/s, 100 Mbit/s Interfaces Number of electrical connections for network components or end devices: 12 Number of 10/100 Mbit/s RJ45 ports / integrated with retaining collar: 12 Number of 100 Mbit/s ST(BFOC) ports for multimode: 2 Operating voltage / of the signaling contacts at DC / nominal value: 24 V Operating current / of the signaling contacts at DC / maximum: 0.1 A Maximum current drawn: 0.33 A Design of the electrical connection for power supply: 4-pole terminal block Type of electrical connection for signaling contact: 2-pole terminal block Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features:
Used and stored control cabinet, 200 cm wide, 60 cm deep, 220 cm high. 9 pieces Danfoss FU Frequenum Converter, Siemens S7 CPU PLC, Simatic OP17 Touch Panel. Location Castrop-Rauxel. Used and put into storage electric control cabinet, 200 cm x 60 x 220. 9 pieces Danfoss FU frequency converter, Siemens S7 CPU SPS, Simatic OP17 Touch Panel. .
Dear Ladies and Gentlemen, We constantly have transformer stations for wind turbines in every power and voltage.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
