siemen u hinsch used for sale

Engine Brand: MERCEDES, Condition: USED, Nominal Power @ Nominal Rpm: 295 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 166 mm, Engine Capacity: 12800 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 340 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-458-991-used/4 2315, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.050 kg, Type number: OM 458.991

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 160 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/john-deere-6068hl557-used/ 42337, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 670 kg, Type number: 6068HL557

Engine Brand: DORMAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3215 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/dorman-8jt-used-engine-par ts/42341, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 2.390 kg, Type number: 8JT

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 360 Kw, Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 9710 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 330 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2015-v6-used/4234 7, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 2.500 kg, Type number: TCD2015 V6

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 118 Kw, Bore: 125 mm, Stroke: 130 mm, Engine Capacity: 7976 cc, Qty Cylinders: 5 Qty, Engine Cooling Type: Air Cooled , Engine Color: Grey , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Working Hours: 5640 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 118 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-f5l413fr-used/42323, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 710 kg, Type number: F5L413FR

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 335 Kw, Bore: 125 mm, Stroke: 130 mm, Engine Capacity: 19144 cc, Qty Cylinders: 12 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Air Cooled , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 2250 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 243 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-f12l413fw-used/42324 , , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: F12L413FW

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 235 Kw, Engine Injection Type: DIRECT , Engine Aspiration Type: TURBO , Air Cooling Type: INTERCOOLER , Bore: 108 mm, Stroke: 130 mm, Engine Capacity: 7145 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 50 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 170 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-bf6m1013fc-used/4232 5, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 655 kg, Type number: BF6M1013FC

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 235 Kw, Engine Injection Type: DIRECT , Engine Aspiration Type: TURBO , Air Cooling Type: INTERCOOLER , Bore: 108 mm, Stroke: 130 mm, Engine Capacity: 7145 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Working Hours: 4105 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 165 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-bf6m1013c-used/42346 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.000 kg, Type number: BF6M1013C

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 225 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-43557 07-used/42350, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 940 kg, Type number: C7.1 881-4355707

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 205 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-45865 16-used/42338, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: C7.1 881-4586516

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 175.2 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 3045 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 280 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-01z-2w132 0-used/42314, , = More information =, , Type: Engine, Type of fuel: Diesel, Emp ...

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 3302 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1950 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/cummins-nt855-g1-pump-used/58, , = More information =, , Type of fuel: Diesel, Type number: NT855-G1 CPL5820; Transport weight [kg]: 3000

Off-road work platform Scissor lift with automatic tilt compensation UPRIGHT Type: SL26SL Year of Make: 2008 Load capacity 680 kg Platform dimensions approx. 3.66 x 1.72 m Platform extension approx. 80 cm Transport dimensions approx. 3.79 x 2.13 x 2.6 m (height railing folded down: approx. 1.9m) Weight approx. 3150 kg Working height approx. 9.93 m Platform height approx. 7.93 m Self-leveling tilt compensation The machine works, but has not yet been further technically and visually refurbished. Therefore, here is the special price in advance in the actual condition. Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee ...

We have two grain unloaders capable of discharging vessels with a draft of up to 17 meters (approximately 100,000 DWT). One unit is a mechanical unloader and the other is a pneumatic unloader. Details are as follows: Manufacturer: Bühler Year of Manufacture: 1983-1985 Mechanical Chain Transporter HM1-T1 + HM2-T1 Transporter type: HL-SKT RSH-450 Feed capacity: 1000 t/hour grain Total length: 28.1 m Chain speed: 2.28 m/s Drive shaft speed: 37.7 rpm Torque on drive shaft: 40,200 Nm Drive power at shaft: 164 kW Drive system: two hydro motors on each drive shaft Hydraulic motor type: MK 43-09200-CO-RN Absorption capacity: 9.2 liters per rotation Specific torque: 147 Nm/bar Nominal torque: 20,100 Nm Nominal pressure: 156 bar Chain Transporter in Boom HM1-T2 + HM2-T2 Transporter type: BKT 1210/290 142V 002 TWIN Feed capacity: 1000 t/hour grain Total length: 33.2 m Chain sp ...

SOREMA HIGH CAPACITY WASH LINE INCLUDING INTENSIVE HOT WASH, HOT RINSE, SINK FLOAT SEPARATION AND FINAL RINSE, APPROX. OVERALL FOOTPRINT: 40' WIDE X 90' LONG, ELECTRICAL CABINET - HOT WASH SYSTEM INCLUDES: (2) MODEL SHW-8000 WASHING SILOS, EACH SILO WITH CONTAINS (2) STR-16/20 INTENSIVE FRICTION WASHING REACTORS, FEED SCREWS, EXTRACTION SCREWS, & EXTRACTION PUMPS, (1) MODEL WCE-2000 WASHING CENTRIFUGE, PROCESS WATER RECYCLING TANK AND PUMPS, 72" DIA. MODEL VBC-1800 VIBRATING SCREEN, FEED SCREW, MODEL WCE-230 MULTI-STAGE WASHING CENTRIFUGE, (2) MODEL SCW-280 CONVEYING SCREWS - HOT RINSE SYSTEM INCLUDES (3) MODEL STR-16/20 STIRRERS WITH SEPARATION CYCLONES, MODEL WCE-1500 WASHING CENTRIFUGE, 72" DIA. MODEL VBC-1800, VIBRATING SCREEN, RECIRCULATING TANK, MODEL SCW-280 CONVEYING SCREW SINK FLOAT SEPARATION SYSTEM INCLUDES A STIRRER, MODEL VSP-20/55 SEPARATION TANK, 72" DIA. VB ...

UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3560 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 701 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/stock/diesel-engines/cummins-qst30-used/42339, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 3.980 kg, Type number: QST30 CPL2968

plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t - number of bottom rollers: 21/24 - Number of supports (top/bottom): 3 /3 - speedof adjustm. of traverse: 0,71 mm / sec - way oftraverse: -18 mm to +42 mm - max. swivellower traverse: 8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Ziegra UBE 10.000-2 streamice machine set on R404A that makes up to 10.000 kg ice each 24 hours. Complete with 4 Ziegra 1500 / 2500 ice makers, 2 Bitzer 6G-30.2Y-40P semi-hermetic reciprocating compressors with each an own suction accumulator, oil separator, liquid tank and liquid line filter drier. Further the ice machine set comes with 2 ECO ACE62B4H condensers and a Siemens Simatic touch panel. If you would like more information, please feel free to contact us. Specifications: Brand: Ziegra Type: UBE 10.000-2 Capacity: 10.000 kg/24h Refrigerant: R404A Dimensions: Part 1: 1800x1200x2880 mm (LxWxH) Part 2: 1380x1100x2500 mm (LxWxH) (2 Pieces) Condensers: 2450x1100x990 mm (LxWxH) (2 Pieces)

Rexroth MSK050C-0300-NN-M1-UG1-NNNN, R911309706 Servo Motor AC 600V, 1000 rpm Item Condition: New Specifications: 5.0 Nm 3.1 A N(max) 4700 min-1 KE(eff) 109.0 V / 1000 min-1 Km 1.77 Nm/A U(max) AC 600 V H1R6A13K5 1_HS 7 kg More servo motors - new and used - can be found in our shop! International shipping costs on request!

ROMACO NOACK BLISTER PACKAGING LINE, UNITY 300 Year of construction: 2022 Packaging line composed of a single-track blister machine with rotary sealing and a continuous motion cartoner. Modular line ready to be connected to different track & trace systems and end of line packaging solutions. PRODUCTION - Output blisters/minute: 300 max. - Output cartons/minute: 10 – 300 (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS - Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm - Weight (approx): 5,300 kg  ...

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model No.: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical.   POWER SUPPLY: Control / Main Units Power supply:  3Φ, 60 Hz, AC 380 V Rated power consumption (cabinet 1):  290 kVA Rated power consumption (cabinet 2):  160 kVA   VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model:  ULVAC PBL-20 Power:  18 kW Fluid charge: 90 L Voltage:  380 V Water cooling requirement:  25 L/min (

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel ...

REF-2720 ULMA ATLANTA FLOW WRAPPER WITH PHOTOELECTRIC EYE AND DOUBLE SEALING JAW Manufacturer: ULMA Model: ATLANTA Year: 1998 Horizontal flow pack wrapper (HFFS) equipped with photoelectric eye. Double film reel and double sealing jaw. Voltage: 380 V / 50 Hz / 16 A / 3Ph Total power: 3,5 kW Output: up to 250 p/min (depending on film and product) Pneumatic consumption: 50 litres/min; 6 bar Sealing jaw dimensions: 200 x 50 mm (WxH) Overall dimensions: 7,000 x 1,300 x 1,650 mm (LxWxH) Weight: approx. 910 kg

General SKU392W1205 MakeSGL Carbon LocationBarneveld CEcheck TypeRS 77-1-295.40.1 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Mild steel Tube (Material)Diabon Surface100 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon, Mild steel Heat exchangercheck Verticalcheck Notified bodyTUV Heating surface100m² Tube capacity800 l Max. temperature200°C Shell capacity980 l Shell diameter814 mm Max. temperature170°C Shell connectionsDN250 Cover connectionsDN300 Information No.41038060/1 Year of construction2015 Floorspace1,7x1,7 m Total height5,8 m Weight3600 kgShell and tube heat exchangersSGL CarbonHeat exchangers > Shell and tube heat exchangersBrand > SGL Carbon What you can expect from Foeth: -- Machine is in working condition -- A ...

The offer includes 10750 Bilora hard shell bags. Formerly intended as protection for small digital cameras, we have already sold them as USB and SHDC bags, medicine bags and bags for measuring devices, such as long-term ECG or similar Each bag has a belt loop and neck strap. We would now like to part with the remaining bundle. These once had a list price of EUR > 15 each. In the PDF files, a list of quantities and the corresponding Bilora catalogue page.

Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...

UNTHA Shredder Model RS30 Year 10/2023 Hours: 97 Power 22kW 400V/50Hz CE marked In ‘as new’ condition

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

Intermittent-motion blister machine with plate sealing and manual product feeding, incl. filling station for liquids. The machine can process ALU/PVC. Output: 15–50 cycles/min at 12 mm forming depth 15–40 cycles/min at 28 mm forming depth

General SKULX015 MakeStolz LocationBarneveld CEcheck TypeTURBO SIFTER BCMT Ø1250 Main Features MaterialMild steel Motor45 KW Length1900 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesø 1250 x 1900 mm Screw sizesExtracting screws under each turbosifter: ø 550 x 3000 mm Inlet350 x 350 mm With inspection hatchcheck MotorBeater motor: 45 kW: Sieve rotation gear-motor: 1,5 kW SpeedBeater rotation speed: 240 rpm: Sieve rotation speed: 6.3 rpm Sieve perforation3 mm MaterialMild steel Information No.24-1598 Year of construction2024 (?) Floor space3,2 x 1,6 m Total height2,2 m Weight3700 kg Extra SpecificationsSieve area: :4.5 m² Air purged glands: :Not listed — however, machine uses compressed-air blowing system for sieve cleaning (1,670 NL/min at 6 bar).Rotating sievesStolzSieves > Rotating sievesBrand > Stolz What you can expect from Fo ...

Key data: 360 mm, 360 mm, 870 mm

4 side tensioning tower with a height of 870 mm incl.

Used AVE - Technologies UNIBLOCCO MLK EFS/ESL 12/12/1 filling machine. New: 2006. AVE-Technologies EFS electronic filling systems are based on high-precision technology, guaranteeing high accuracy and high efficiency at all stages of operation. EFS filling machines are suitable for non-carbonated products such as water, fruit juices and nectars, milk, spirits, oils and food sauces in plastic and glass bottles. The set includes a labelling machine and a cap lift.

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

🎯 Perfect Upgrade for Renovators, Formwork Pros & MANTO Fans! Are you already using MANTO Laufkonsolen 90 ? Then this accessory set is the ideal addition for safer and more efficient work on your site.🛠   Why you should get it: Safe working: Guardrail attachment for 900 mm wide platforms Quick to set up: Can be mounted without special tools Perfect fit: Compatible with both vertical and horizontal MANTO panels Buy as a set & save: Ideal for retrofitting and clearance stock   📦 Only while supplies last! Order now and get started immediately.⚡ This accessory package enhances your existing MANTO system and makes every platform safer in no time †thanks to simple attachment with spring pins and additional bolts. All at a top price . 🛒 Don’t wait until your accessories are gone! Reserve your complete set now  ...

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,399.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 5399,00 ...

Framax Panel 1.35 m †Small but Powerful! ⚡🔩 Small but mighty! The Framax Panel 1.35 m combines stability, efficiency, and durability †perfect for any formwork task. 🚀 Your advantages at a glance: 🔹 Strong & durable: Galvanized and powder-coated steel frame stands up to the toughest demands. 🔹 Quick assembly: Smart locking system and continuous rib make setup fast and easy. 🏗️ 🔹 Extra robust: Xlife Framax panel, rear-fastened, for maximum strength. 🛠 🔹 Crane-friendly: Form large surfaces effortlessly †no extra effort required! 🎯 Small in size, big in impact! 💥 Get your Framax Panel 1.35 m now at Form-on ! 🛒 Price: from € 153,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned conditi ...

This SiteLight 2G package includes 96 used LED mesh modules , offered as a complete set including packaging. The modules originate from a connected SiteLight system and are based on the 2G generation designed for large-scale LED mesh applications. They were originally intended for use as a media façade and construction site communication solution †for example when mounted on façades, scaffolding structures or high-rise formwork in combination with protection screens such as Xbright. This makes them suitable for projects requiring extensive LED surfaces on buildings or temporary installations. 💡   The modules have not been individually inspected before sale and are therefore offered as untested used equipment . Some panels may be functional, but this cannot be guaranteed. No statement is made regarding the actual functionality of individual modules. 🔍 ...

Form-on multi function clamp - compatible with Doka Framax/Ringer Master  †strong, versatile, reliable 🚚   With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. ⭐   The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧   And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC   With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Ring Eye Stitching Heads

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320

Uhlmann C 130 horizontal cartoning machine ampoules / blister machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump / Venturi

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/900mm/1550mm, weight: approx. 300kg. An on-site inspection is possible.

A round and long moulding machine Eberhardt is available. Moulding length: 1450mm, dough piece weight range: 150g-1500g, moulding capacity: approx. 650-1000pieces/h, machine weight: approx. 650kg. Including additional moulding bell (650g-1750g) and touch panel control. Documentation available. An on-site inspection is possible.

boring spindle diameter: 130 mm taper: ISO 50-7388/1 milling spindle diameter: 200 mm direct current motor: 22 kW : 10-1600 U/l rapid traverse: der Achsen 6000 m/min z-axis: 800 mm y-axis: 2100 mm x-axis: 3000 mm w-axis: 1500 mm Size of table plate: 1250 x 1500 mm table movement: max. 10000 KG kW : im Eilgang 3,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU345S1073 MakeUSF Seitz Filtertechniek GmbH LocationBarneveld TypeSEITZ-VELAcart Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles5 Top connectionsDN25 Capacity34 Ltr. MaterialStainless steel Information No.542 Year of construction2000 Mounted on legscheck Floorspace0,4x0,3 m Total height1,5 m Extra SpecificationsInlet: DN50 Outlet: DN50 Max. working pressure: 10 bar Test pressure: 14 bar Max. temp: 85/134 °C Content: 34 Ltr. WITHOUT CANDLES Candle filtersUSF Seitz FiltertechniekFilters > Candle filtersBrand > USF Seitz Filtertechniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...