133,335 used machines on RESALE, but how to find them? Machine Search
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg
Regloplast temperature control unit Bj 2011 Technical data in the pictures Price is net plus VAT Dismantling and loading by buyers All information without guarantee
For sale is a temperature control unit from Regloplast Item must be dismantled and loaded by the buyer. Price is net plus VAT All information without guarantee
Several spare parts for Corazza FD220L machines existing out of:, - Cams., - Holders., - Guiding plates., - Bushes., - Axles., - Toothwheels., Type of Machine: Yeast / Butter Packaging Machine, Dimensions: Box 80 x 60 x 60 cm, Weight: 140 kg
UHT Pilot Plant APV Tube Heater Capacity: approx. 100 Ltr./h - Tube heater - 2 process tanks with a capacity of approx. 70 litres each - High-pressure homogenizer APV LAB 100 - PWA Cooler
Key data: 2000 mm, 6 mm, 10 mm
4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...
Used Universal Dishwashers Decker DishwasherManufacturer : DeckerType : Dishwasher TT3920DECDDyear of construction: 2019For bakeries and butchers/butchersDetails see pictures
Machine Type: Ultrasonic Cleaning Device Make: Finnsonic Type: MC-360/III Year of Make: 2002
Key data: 300 °C, 12 kW
1.0 St. gebr. Temperature control unit Manufacturer: TOOL - TEMP Type: TT - OIL 300, 12 kW Year of manufacture: Medium: OIL Temperature: 300° C Heating capacity: 12 kW
General SKU327X676 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity7.5 KW Temp.140 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity7,5 kW Temperature—25 / 140 °C Tank capacity50 l. With pumpcheck(2x) Capacity4 m3/h Motor2x 3 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR350HT Mach.No.HKS08078 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,00 x 1,50 m Total height2,00 m Weight1500 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destin ...
General SKU327X679 LocationBarneveld CEcheck MakeLauda Main Features Heating (medium)Water glycol Capacity5.7 KW Specified Features - Temperature control unit MaterialCopper Temperating machinecheck pumpstation With pump2x Grundfos Motor2 x (2,2 kW, 400V) Information TypeLSI 51 437 Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck Floorspace1,00x2,00 m Total height1,25 m Weight1000 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU327X677 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity4.5 KW Temp.45 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity4,5 kW With coolingcheck Temperature-25°C/+45°C Tank capacity80 l With pumpcheck 3x Capacity1,4 m3/h Motor3 x 1,1 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR400T Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,30x1,90 m Total height2,00 m Weight2000 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...
General SKU394U1111 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt, , (Ex) Temperature-35/130 ºC With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information TypeTR400HK/K-EX Mach.No.HSK13074 Year of construction2013 With switchcheck Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
Elma XTRAST Elmasonic 9738 Ultrasonic cleaning device In a very good condition!
x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: HSK 63 Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: total power requirement: 43 kVA weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions
Krones Variopac Pro FS 45 Type: Film only Output: 45 cycles/min. Year of Make: 2008
Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -Finishing unit: from BRANDT KM 36 edge banding machine -Motor: 0.18 kW -side: adjustable -Height: adjustable -Number: 2x aggregates available -Speed: 1x 1360 rpm, 1x 1250 rpm -Price per piece -Dimensions: 260/370 / H510 mm / 260/370 / H480 mm -Weight: 22 kg / pc.
Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg
Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg
Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg
Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg
Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg
Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg
Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Cyclus Battenfeld, operating unit from injection molding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 -Type: MDE-BDE -Number: 3x control unit available -Price: per piece -Dimensions: 290/50/190 mm -Weight: 0.8 kg/pc.
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg
Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg
Key data: 850 mm, 700 mm, 500 mm
Inv. Num. : 8976 Type: C 400 U Producer: Hermle Created: 2015 Parameters: Control system: Heidenhain iTNC 530 Number of stacking positions: 38 Number of axles: 5 pieces X-axis travel: 850 mm Y-axis travel: 700 mm Travel Z axis: 500 mm Cone: SK40 Electric spindle speed: 18000 1/min Spindle cooling: 40 bar Rotary table Ø 650 mm A 91° / -139° C 360° BLUM Tool Measuring System BLUM workpiece probes Direct torque drives in rotary axes Chip conveyor Oil mist extraction Electronic handwheel
Key data: 450 mm, 600 mm, 330 mm
Catalog No. : 8975 Type: C 22 U Producer: Hermle Made in: 2018 Characteristic: Control system: Heidenhain TNC 640 Total hours: 23,000 h Number of stack positions: 192 Number of axis: 5 pcs X-Axis travels: 450 mm Y-Axis travels: 600 mm Z-Axis travels: 330 mm Block speed: 18000 1/min Taper: HSK-A63 Internal cooling: 80 bar Rotary table Ø 320 mm A ±135° / C 360° Hermle IH30/60 handling system (active) BLUM tool measuring system (LC50) BLUM workpiece probe (TC52) Dynamic Precision
This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details.
Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg
REF-2732-2733 BELCA SLEEVE WRAPPER WITH SHRINK TUNNEL Manufacturer: BELCA 1) Sleeve wrapper: • Model: BEP 60 REVISTAS • Serial no.: L-433-E • Year: 2012 • 1 kW/380 V • Sealing bar: 650 mm • Overall dimensions (mm): 1,400 x 1,250 x 2,000 (LxWxH) 2) Shrink tunnel: • Serial no.: L-288-V • Year: 2005 • 17.53 kW/380 V • Aperture: 670 x 380 mm (WxH)) • Tunnel length: 1,030 mm • Overall dimensions (mm): 2,200 x 1,250 x 1,750 (LxWxH) Both machines can be purchased together or separately.
Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg
Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg
Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg
Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve -Manufacturer: Alco, thermo-valve upper part unused in original packaging -Type: XB 1019 MW55-1B/PCN 803379 -Operating range: +10 to -30 °C -Price: per piece -Number: 7 piece -Dimensions package: 120/120/H160 mm -Weight: 0.7 kg/piece
This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.
This 3-axis Auerbach FUW 625 was manufactured in 1997. It features a travel of 625 mm in the X-axis, 525 mm in the Y-axis, and 455 mm in the Z-axis. The machine is equipped with a 20-slot tool changer and operates at spindle speeds ranging from 25 to 5,000 RPM. If you are looking to get high-quality machining capabilities, consider the Auerbach FUW 625 vertical machining centre we have for sale. Contact us for further details.
A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.
Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Katt, milling unit with 3 milling cutters -Motor: Type N132M 12 kW / 2960 rpm -Protection class: IP 44 -Shaft: both sides Ø 40 x 235 mm -Milling width: 20/10/18 mm -Dimensions: 840/320 / H380 mm -Weight: 99 kg
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Hemag, saw unit can be swiveled by 30 ° -Saw blade: max. Ø 350 x 30 mm -Motor: Perske type DKNS 120/2 3.0 kW / 2830 rpm -Protection class: IP 54 -Dimensions: 950/780 / H630 mm -Weight: 115 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld injection molding machine -Type: PT-350/2.3/M/ FL 83 -Motor: ABB 11 kW / 1455 rpm -Individual components: see photos -Dimensions: 980/610/H490 mm -Weight: 184 kg
maximum number of results exceeded
please refine your search
