siemen u hinsch used for sale

Stock number: F326, Bag filling machine, stainless steel,, Uhlmann type HS III/S,, Vibration out sorting of subject to, strippack., Material: Stainless steel AISI 304

Stock number: R1144, Mixer, stainless steel,, KS universal type 22B., Combined mixer, pre-chop and emulsification machine,, with circulation., Standing on wheels,, 9/18,5 kW. motor., 380 Volt., Litre: 350, Material: Stainless steel AISI 304

Stock number: R1073, Homogenizing agitator, stainless steel,, Ultra-Turrax type T115., 3 kW motor,, 2850 rpm., 220/380 volt., D 115 mm. head., Material: Stainless steel AISI 304, Head: D 115 mm.

500 litre, Stock number: T669, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg frame with wheels, Top: Dished, Bottom: Dished, Inspection cover: In top, Ø 400 mm., Agitator: Yes, Agitator type: Mixer Wing, Motor: 0,8-1,6 kW - 700-1400/46-93 rpm., Turbolence plate: 3 pcs., Inner diameter: Ø 800 mm., Total height: 1920 mm., Manufacturer: Christoph Ullmann, Year: 1959

Automation incl. pallets for pick-up with Erowa 4-fold zero-point clamping system

300 litre, Stock number: T3885, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg stand with 4 pcs. of legs with wheels, Top: Open with strengthening ring, Motor: 0,55 kW - 230/400 Volt - 2820 rpm., Inner diameter: Ø 630 mm., Outer diameter: D 860 mm., Total height: 1520 mm., Manufacturer: Christoph Ullmann, Year: 1959, Other: Tube heat exchanger and pump

2.090 litre, Stock number: T3638, Filter tank (resin), stainless steel,, open top with bolted lid, hanging in leg consoles., Dished top and bottom,, filter frame in the top and in the bottom., Ø 800 mm., Litre: 2.090, Material: Stainless steel AISI 304

445 litre, Stock number: T3010, Litre: 445, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 6 pcs., Item: Tank, Standing: 4 pcs. of legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 400 mm., Agitator: From the tank cover, Agitator type: Propeller, Motor: 0,55 kW - 220/380 Volt - 180 rpm., Dimensions: L 950 x W 750 x H 1440 mm., Manufacturer: Umformtechnik Hausach GmbH

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 280 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offeres : checked for good working conditions OR reconditioned, installed power - used power in work: about 60-65% : 280, availability: ready-to-go

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, capacity: 100-3.000 KG.

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.

Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z´: 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Weight: 1300 kg

kop kan draaien: 90° (R amp; L) / 45° (F amp; B) 360° bovenarm draaibaar spindelhartlijn tot kolomoppervlak: 71 gt; 476 mm Max longitudinal travel X-axe: 750 mm Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 2 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Length: 1435 mm Depth : 1600 mm Height: 2100 mm Weight: 1 ton

Nummerierwerke Buchdruck / Numbering Units Letter Press Leibinger NW

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used power ...

Ablader für Stapel / Unloader for Piles Polar TR 1ER 110-4

Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid

Key data: 300 mm, 150 mm, 300 mm

Universal Milling DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Key data: 318 mm, 648 mm

JONES & SHIPMAN SUPREMA EASY 650 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER (2010) Table: Swing:... 12.5" Distance Between Centers: 25.5" Table Travel 29.5" Max. Traverse Speed . 472" IPM HPG Increments .. 0.00005", 0.0005", or 0.005" Table Swivel 18 Deg. CCW, 16 Deg. CW Wheelhead: Total Infeed Travel:. 10.236"" Max. Speed .. 236" IPM Minimum Programmable Increment .. 0.00005" HPG Increments .. 0.00005", 0.0005", or 0.005" Swivel Range 190 Degrees CW 45 Deg. CCW External Grinding Wheels: Grinding Wheel Size, L.H. Standard:.. 14" x 2"W x 5"B R.H Standard: .. 12" x 1"W x 5"B Spindle Speeds (3):.. 1773, 2069 & 2400 RPM Motor Power: 5.5 H.P. Headstock: Swivel:.. 15 Degrees CW 90 Deg. CCW Speed, Infinitely Variable:.. 30 to 450 RPM Centers, Standard/Reduced ... #5 MT/#3 MT Approximate Weight: . 11,000 Lbs. Equipped With Internal grinding wheel attachm ...

Inv. Num. : 8503 Type: Topper TMV-510T Producer: Tongtai Created: 2008 Parameters: Control system: Fanuc 0i-MF Plus Operating hours: 2532 h Work table length: 600 mm Work table width: 360 mm X-axis travel: 510 mm Y-axis travel: 360 mm Travel Z axis: 300 mm Speed: 8000 1/min Spindle power: 5.5 kW Cone: BT-30 Number of all tools: 20 pieces Number of axles: 5 pieces Rapid traverse X/Y/Z: 48 m/min Machine height: 2310 mm Machine length: 2700 mm Machine width: 1600 mm Machine weight: 2000 kg Equipment: Renishaw tool probe Grips CNC-controlled 5th axis TSUDAKOMA TN-101

Stephan PrimeCut12 Universal Machine Two speeds: 1440/2880rpm Stainless steel kettle removable transparent plastic lid Crank for actuating the mixing blade Machine has considerable signs of use, the lid is covered with hairline cracks due to cleaning in the dishwasher, which do not impair the function, but are unsightly. Just like the stirring blade in the lid. The machine is equipped with a knife insert and a mixing insert and should always be thoroughly cleaned before use. Video about the test run available on YouTube

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...

Colchester Univ. Lathe Master 2500 Center height 180 mm Center width 600 mm Bore (passage) 40 mm RSF 2-Axis Digital Display Type Z-550 incl. accessories

Manufacturer: TOOL-TEMP Model: TT-28000 DG Type of Machine: Temperature Control System Voltage (Volt): 3-phase, 380–415 V Power (Watt): 3 × 9000 W Frequency (Hz): 50 Hz Refrigerant Gas (Gas): R-134a Refrigerant Quantity: 10 kg Find more here - / Contact us at -

BERNARDO Variomill FU 2000E Servo universal milling machine was built in 2020 in Austria by PWA Handelsgesellschaft m.b.H. The machine, distinguished by its stable design made of grey cast iron and the use of modern technologies, is the perfect choice for machining heavy, oversized workpieces. All linear axes are driven by high-performance servo motors, which guarantee appropriate accelerations and feed rates in each direction. What’s more, the X axis has been coated with a special Turcite B coating to reduce the effect of slippage. All of this, combined with extensive equipment, maximises the precision and repeatability of the produced parts, even during the most intense challenges. The Variomill FU 2000E Servo vertical milling machine weighs 4500 kg. Technical specifications of the BERNARDO Variomill FU 2000E Servo milling machine - feed in the X/Y/Z axis: 1400/700/500 mm - rapi ...

Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Key data: 500 mm, 400 mm, 400 mm

Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.

Key data: 140 °C, 10 kW

Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used

Key data: 140 °C

Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 160 °C, 20 kW

Temperature control unit of the tools - Single STW 180/1-18-70-N1.1 (2 pcs.) Year of Make: 2013 Location: Lodz, Poland Description: Max. heating capacity - 160°C Heat transfer medium – water Power: 20 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 140 °C, 10 kW

Temperature control unit for tools - Wittmann Tempro Plus (15 pcs.) Year of manufacture: 2009-2018 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 90 °C, 10 kW

Temperature control unit for tools - Wittmann Basic-C90 Year of Make: 2015 Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 90 °C

Temperature control unit of tools - Tool Temp TT-188 (20 pcs.) Year of construction: Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 9850 watts Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 585 mm, 4064 mm

JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Hydraulic power unit with hydraulic pump BOSCH REXROTHHydraulic power unit Year of construction approx. 2000Operating pressure pump1: 10 barVolume flow pump1: 24 litres/min. Engine power pump1: 1.5 kWoperating pressure pump2: 120 bar (max.140 bar)Volume flow pump2: 44 litres/min. Engine power pump2: 11 kWTankle capacity: 200 litresMains connection: 400 volts, 50 Hz- 2 independent hydraulic pumps, each with its own drive motor- 6 hydraulic valves built- Cleaning cover in the oil tankSpace requirement L x W x H 1000 x 700 x 1200Weight:

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. tool milling machine directly from one resolutionMilling machine DECKEL type FP 4Masch. No. 1/0687 Year of construction 1978Travel X: 700 mm, Y: 400 mm, Z: 450 mmTable clamping surface 860 x 500 mmSpindle holder SK 40 - M16Spindle speed 31.5 - 1600 rpm. 18 stepsQuill displacement horizontal and verticalMain spindle drive 4 kWNet connection 380 volts, 50 Hz- Digital display 3-axis HEIDENHAIN- Universal swivel-tilt turntable- Coolant device in the machine base- Machine vice- none

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from