133,956 used machines on RESALE, but how to find them? Machine Search
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 7 kW weight of the machine ca.: 1.8 t required space: 2.3x2x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 44 Mio. max. printing speed sheets: 8000 /h max. paper size: 32x46 cm numbering unit: include The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.
Capacity (max.): 600 pieces/h Connected loads: 220/240 V, 50/60 Hz, 17.5 A Machine dimensions (LxWxH):1520 x 790 x 1090 mm Machine weight: 160 kg Rated power: 3,700 W Rated current: 17.5 A Min. product weight : 0,05 kg Max. product weight: 15 kg Max. film width: 600 mm Max. film roll diameter: 300 mm Film roll core diameter: 77 mm Film thickness: 10-50 μm Availability: immediately Condition: well-maintained, in working order
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg
Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,
(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...
NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M
Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg
Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance
Key data: 120 mm, 1 kW
Extraction System Extraction FIELDS TYPE: AF10 Connection diameter approx. 120 mm Motor power: 1.1 KW mobile. The machine works. Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. all information without warranty. Subject to prior sale. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.
Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.
Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.
Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug
Key data: 100 °C
Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request
Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm
Key data: 160 mm, 2 kW, 1770 m³/h
mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2
used
For sale is a used Nordson Problue 10 hot melt machine
used
For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)
x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
Power ( watts ) 11100 Voltage ( volt ) 400 Auction-ID: A7-45393-23
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...
Includes 2x battery case (810x1500x820 mm) Auction-ID: A1-43429-69
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgDrive power (100% DC)9 kWSpeed max.12000 rpmDrive power (40% DC)13 kWDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Max. torque82 NmTool Magazine with30 PositionsTorque (100% DC)54 NmWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...
Magnetic swivel table as shown in the pictures. Further information on request
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-22
Diesel engine 8.2 kW orange color Auction-ID: A1-45995-6
Key data: 1000 mm, 450 mm, 600 mm
Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T
maximum number of results exceeded
please refine your search
250 € 
