siemen u hinsch used for sale

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt, belt conveyor, transport belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg

spindle taper ISO: 40 x-travel: 710 mm y-travel: 600 mm z-travel: 445 mm Control: Heidenhain type: TNC355 mm table surface area: 1000x550 mm turning speeds: 6300 U/min quill stroke: 80 mm Feed: 1-3600 mm/min rapid traverse: 6 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 700 mm z-travel: 750 mm Control: Heidenhain type: TNC 151 table surface area: 1200x630 mm spindle taper ISO: 50 turning speeds: 20-2900 U/min milling-head swivable +/-: total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 700 mm z-travel: 850 mm control: Heidenhain TNC 407 taper ISO: 50 Table dimensions: 1950 x 650 mm spindle speeds: 80 - 3000 U7min voltage: 400 V total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm

Pneumatic Injection Unit Kremlin A25 P air: 6 bar P prod. 6 bar Dimensions:45 x 160 x 45 mm

Linear unit for pneumatic cylinders COMP AIR

Linear unit for pneumatic cylinders JOUCOMATIC

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

Hydraulic power unit with pneumatic hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) Drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power unit ORSTA B.604.263 Delivery pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Hydraulic power unit SCHNUPP 100 bar 90 l/min pump MOOGMOOG 0514 700 127 280 bar motor: 22 kW 380 / 660 V stainless steel tank: approx. 750 l used, tested ! Dimensions: 2300 x 1700 x 1900 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

Hydraulic power unit, compact power unit BUCHER UP100K1G3-01AP100 222396001 150 bar 1.2 cm3 / U motor: 0.75 kW 1400 rpm 220 / 400 V New !' Dimensions: 460 x 240 x 200 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 motor: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

hydraulic power unit with 40 liter tank 220 / 380 V motor: 0.55 kW IP54 used, tested ! Dimensions: 610 x 580 x 610 mm

Hydraulic power unit with tank FLUTEC PTF-200/1.0/M/ pump: BOSCH FD 071 0 513 300 101 p max = 70 bar Q = approx. 17 cm3/U motor: 2.2 kW 220 / 380 V tank approx. 100 l used, tested ! Dimensions: 650 x 550 x 1000 mm

Open Linear Bearing Unit STAR 1067-630-40 067-30 Diameter: Ø 30 mm Foot: 84 x 60 mm New ! Dimensions: 84 x 68 x 59 mm

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

Twist drill WMW Ø 68 mm x 335 mm HSS total length: 335 mm spiral length: 130 mm Morse taper shank: MK5 used ! Dimensions: 335 x 70 x 70 mm

Hydraulic power unit with radiator BOSCH 0 813 260 213 ( 0813260213 ) 2 819 042 654 ( 2819042654 ) Q : 23 / 15 l/min p: 75 bar (1088 psi) tank capacity: approx. 100 L motor: 3 kW 400 V 3AC Cooler: 0.37 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 1250 x 7800 x 1670 mm

Twist drill PAGUS 92 mm x 430 mm HSS Overall length: 430 mm spiral length: 150 mm Morse taper shank: MK6 used ! Dimensions: 430 x 92 x 92 mm

Hydraulic power unit with gate gate pump ORSTA pump: 16/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 16 cm3/U motor: 1,1,00 5 kW 940 rpm 220 / 380 V tank: 75 l as a spare part for Hohenstein RBT400 !' used, tested ! Dimensions: 920 x 430 x 780 mm

Hydraulic power unit with tank REXROTH pump: PV2V3-30/12R1MC-100A1 p max: 100 bar (pump) Qmax: 8,50 bar 5 cm3/U Tank 60 L Motor: 1.5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 600 x 520 x 810 mm

Hydraulic power unit HOERBIGER FLUIDTECHNIK Working pressure: 50 bar Magnetic voltage: 24 V Pump flow rate: 8 l/min Tank volume: 25 liters Motor: 0.75 kW Motor voltage: 220/ 380 V/ 50 Hz used, tested ! Dimensions: 400 x 360 x 100 mm

Hydraulic Power Unit With Air Operated Hydraulic Pump GRACO FIRE-BALL pump: L83 6203876 Air motor: B84 6203963 Ratio: 5:1 drive pressure: max. 12 bar Q: 10 l / min tank: approx. 10 l used, tested ! Dimensions: 260 x 250 x 650 mm

Hydraulic power unit WEHRDOHLER PUMPENFABRIK FMA 1/12 ( FMA1/12 ) P: 40 bar Q: 3.2 l / min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 590 x 550 x 500 mm

Universal luminaire Hera FD-4-E-ST 468 220 V 15 W used, tested ! Dimensions: 560 x 90 x 60 mm

Hydraulic Power Unit with Gate Gate Pump ORSTA pump1: 10/16-1 TGL 10889 pump2: C2,5-2 L TGL 10885 motor: 1.5 kW 935 rpm 220 / 380 V Tank: 80 l used, tested ! Dimensions: 920 x 520 x 1350 mm

Hydraulic power unit with two pumps HPE Q1 = 48 l/min p1 max = 90 bar P1 = 7,,P1 5 KW Q2 = 23 l/min p2 max = 80 bar P2 = 4 KW 400 V 200 l Tank used, tested ! Dimensions: 1700 x 1200 x 1650 mm

Hydraulic Power Unit FLUTEC PTOK-250 / 1.1 / M / R ( PTOK-250/1.1/M/R ) max: 100 bar max: 28 l/min with 100 liter tank pump with cooling 220 / 380 V motor: 3 kW IP54 used, tested ! Dimensions: 820 x 500 x 830 mm

Hydraulic power unit with radiator and tank REXROTH engine: 5.5 kW 400 V radiator Hydac OKA-R2 S/1.2/8/M engine:0.37 kW Tank: 115 l used ! Dimensions: 1100 x 1000 x 600 mm

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg

Hydraulic power unit with filter and tank REXROTH / FMB BLICKLE 120 bar 9 L/min tank 100 L pump pump BUCHER QX22-006R119 Pd 125 bar Vg 006 cm3/U engine: 2,2,000 2 kW 1410 rpm 380 V used, tested ! Dimensions: 1000 x 900 x 1500 mm

Hydraulic power unit with tank REXROTH pump 1: PV7-17/25-45RE01MC3-08 R900538525 p max: 80 bar ( pump ) pump 2: PV7-16/10-14RE01MC3-16 R900598753 system pressure pressure : max. 70 bar tank: 250 l engine: SIEMENS 1LA7163-4AA91-Z 11 kW 1460 rpm 400 / 690 V 3AC 50 Hz IP55 used, tested ! Dimensions: 1220 x 1000 x 1920 mm

Hydraulic power unit with radiator BOSCH p: 75 bar Q: 23 / 15 l/min tank capacity: approx. 100 L motor: 3 kW 400 V Radiator: 0.37 kW used, tested ! Dimensions: 1230 x 600 x 1660 mm

Hydraulic power unit with tank PAGUS pump: ORSTA, SACHSENHYDRAULIK GmbH PE15-55/16.0-RH3L Operating pressure: max. 16.0 MPa ( 160 bar ) ( Pump ) Displacement volume: 55 cm3 / U (pump) Rated speed: 1500 rpm Motor: VEM K11R 132 M4 ( K11R 132 M4 ) 7,7 5 kW 1440 rpm 400 / 690 V 3AC 50 Hz IP55 Tank: approx. 350 l used, tested ! Dimensions: 1510 x 800 x 1200 mm