133,995 used machines on RESALE, but how to find them? Machine Search
Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 60 Pcs./pcs. Tool dimensions (with occupied adjacent spaces): 125 mm Numbers Of Pallets: 2 Operating hours: 26180 H spindle running time: 26180h 43m 46s h/m/s automatic mode: 28559 H on time: 120 H pallet change time: 60 s Further information: internal coolant supply
Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition
: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2024. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. For example, the activated carbon filter (newly installed) located in the hood as the heart is protected from too fast contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...
Key data: 850 mm, 270 mm, 355 mm
Table width 315 mm, table length 1250 mm Tool holder SK 50 Speed range 28 - 1400 rpm Feed range 16 - 800 mm/min Travel x=850 mm, y= 270 mm, z=355 mm Connected load 8 kW Incl. Electric clamp horizontal Vertical head in X swivel with manual tightening Dispensing as present, no longer energized
Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm
Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)
Telescopic belt conveyor Caljan Long John LJ3 Medi 600-5/6,5 RA2165 Base part with 2 electrically retractable and extendable telescopic elements. The telescope can be infinitely extended up to 11500 mm by pushing a button. Length base part: 5000 mm Width base part: 920/1000 mm Height base part: 770 mm, 1100 mm Transfer to conveyor technology Extension: 6500 mm Total length: up to 11500 mm Band width: 600 mm Condition: Overall condition good Load: up to 50 kg/m Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Fuse: 16 AMP optional: upgrade with start-up and clearing function Features: Construction year: 1998 condition: good (used) Conveying length in mm: 11500 ( 5000 + 6500 ) Nominal / outside width in mm: 1000 Belt width in mm: 600 Driven: YES KW: 1,75 Ampere: 16 Conveyor speed m / s: 0,5 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindun ...
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...
Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.
Key data: 900 mm, 560 mm, 480 mm
Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle
Key data: 600 mm, 4450 mm, 450 mm
Control Heidenhain TNC 426 Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 min-1 Tool magazine for 30 Wkz., SK 40
We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.
Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.
The DMG 3Decure post-exposure unit is used for the professional curing of 3D-printed components and ensures improved material properties through optimized UV aftertreatment. Thanks to its precise control, it enables uniform curing and thus ensures higher mechanical stability and surface quality of the manufactured parts. Particularly suitable for industrial applications in additive manufacturing. Properties: - Fully automatic material curing programs - Integrated 6-inch touchscreen - Network connectivity - Easy calibration with ACCS sensor to ensure instrument function - 360° UV illumination for even curing Specifications: - Power: 160 W - Voltage: 24V - Interfaces: LAN, USB, On/Off - Dimensions: 23 x 38 x 27 cm - Weight: 12 kg Condition: very good condition Manufacturer: DMG Dental Material Gesellschaft mbH Elbgaustraße 248 22547 Hamburg Germany Phon ...
Key data: 299 mm, 620 mm, 150 mm
Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...
Key data: 630 mm, 560 mm, 560 mm
Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m
Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg
Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T
used
impressions: 28 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 956.596 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk Stack height: Anleger 490 mm Stack height: Ausleger 460 mm power required: 3,0 KW frequency: 60 Hz voltage: 220-240 V 3 inking forme roller per printing unit Blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 420 mm, 250 mm, 350 mm
with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!
Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal Materials Testing Machine Manufacturer: Lloyd Type LR5K MK 4 Serial No. 102894 Lloyd Instruments Sold with: -5000N Force Transducer (new) -Force transducer 250N -50N load cell -Manuals and CDs -Computer complete with screen -Software Technical configuration: -Load range: 10N - 5kN -Force measurement accuracy:
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 961.450 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 958.026 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 30,7 x 44,0 cm serial no.: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 35 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 957.449 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Linear unit with planetary gearbox, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex ...
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Leicht Stanzautomation GmbH Type: PW-170-E Year of Make: 2007 Weight: 650 kg Compressed air: 6 bar Connected loads: 3x 400V/PE/3x16A Frequency: 50/60 Hz Load capacity: max. 2000 kg Speed: max. 20 m/min Winding plate Ø: 1700 mm All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...
Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition
x-travel: 900 mm y-travel: 630 mm z-travel: 500 mm table-size: 1200 x 600 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 2 - 4000 mm/min rapid motion -longitudinal/cross/vertical: 10/10/8 m/min numbers of positions in the tool changer: 22 quill stroke: 100 mm total power requirement: 20 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 4 x 3 x 2,4 m electronic hand wheel: cooling equipment: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s
Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s
Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION
Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION
impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...
Order number: SK 3384.500 Design: Roof structure Product Energy-efficient Blue e rooftop air conditioners with integrated e-Comfort controller and electric condensate evaporation as standard. Advantages Can be networked with e-Comfort Controller with IoT interface via Blue e IoT adapter from 500 W cooling capacity Material: Sheet steel Colour: RAL 7035 Scope of delivery: - Condenser with hydrophobic RiNano coating - Integrated electrical condensate evaporation - Completely wired, ready for connection (plug-in terminal block) -Drilling jig - Mounting material Total cooling capacity according to DIN EN 14511: Cooling capacity L35 L35/50 Hz: 1.6 kW Cooling capacity L35 L35/60 Hz: 1.75 kW Cooling capacity L35 L50/50 Hz: 1.15 kW Cooling capacity L35 L50/60 Hz: 1.21 kW Rated operating voltage: 230 V, 1~, 50 Hz/60 Hz Hint: The 3273.500 roof-mounted air conditioner is also ...
Key data: 310 mm, 170 mm, 340 mm
Built in 1990, with 3-axis digital display. Spindle holder ISO 40, travels 310 x 170 x 340 mm, 16 spindle speeds from 40 - 2000 rpm, 16 feeds from 9 - 450 mm/min, motor power 1.2/1.8 kW, weight 700 kg. The machine is in good condition.
Moog Servo Valve Unit D665-5703 & D661-5623C High Performance Valve Module For sale is a fully functional, industrially used high-performance servo valve unit from MOOG, consisting of two perfectly matched valves Also available as a single component ! Moog D661-5623C – High-Response Valve Technical Property Value Model name: D661-5623C Type code G18H0A0NSA0HP Valve type 4-way, 2-stage with bushing slider Nominal volume flow 120–200 l/min (depending on version) Operating pressure P, A, B max. 350 bar Return pressure T (internal) 210 bar Return pressure T (external) 280 bar Control pressure 25–350 bar Coil stroke ±0.13 mm Control surface (AK) 1.35 cm² Actuation time (0–100 %) approx. 14 ms Hysteresis < 0.6% Zero displacement < 1% Supply voltage ±15 V DC Input signal ±10 V IP65 protection Mass approx. 5.7 kg Connection diagram ISO 4401-05-05-0-94 ...
Engine suitable for 508, Unimog, 63 kW, 3782 m³, OM 314.948 with gearbox and add-on parts
maximum number of results exceeded
please refine your search
