side squaring used for sale

• For applying security labels to both side flaps of a folding bo. • Output max. 100 cartons/min • Max. Folding box width in infeed direction crossways 180 mm, max. height 92 mm • Side conveyor belts • Upper retaining conveyor • 2 Label dispensers PAGOmat 6/2 A-100 with operating units • Label dispenser Height and crosswise adjustable • Label reels core diam. 76 mm, outer diam. max. 280 mm • Various controls via light barriers • Blow-out station for bad cartons with ejection countercheck • HMI Siemens Simatic Panel Touch, • PLC Siemens S7-300 CPU 314C-2DP • Mobile • Drive 400V/50Hz

Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed  ...

Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation

Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation

Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-

Key data: 4 , 180 mm, 110 mm

SPECIFICATIONS: Length of the planer: 2300 mm Working width: 180 mm Working height: 110 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V SHAFT CONFIGURATION: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW) EQUIPMENT: 01 Unloader 01 Return Conveyor

Key data: 4 , 180 mm, 120 mm

SPECIFICATIONS: Length of the planer: 1700 mm Working width: 180 mm Planing height: 120 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW)

Transnorm right flush roller conveyor 3470-1830-1450 RA1855 Make: Transnorm Basic dimensions: conical structure, 3470x1160-1830 mm Length: 3470 mm Nominal/external width (NB): 1160-1830 mm Roll length (RB): 160-450 mm & 640-1000 mm Frame height: 290 mm Currently set height: 640 mm Height of side guide: 410 mm Width (height) side belt 300 mm Roller diameter: 50 mm Roller pitch: 65 mm Including 8 feet Motor MOVI-Mot 3x300-500V 1,5kW Conveying speed: Features: Construction year: 2017 Conveying length in mm (NL): 3470 Optional erhältlich: Frequenzumrichter Electric data: 70Hz, 217 / 375 V Antrieb: Nord-Drivesystem Supports: 8 Bauhöhe in mm (BH): 290 Belt width in mm (GuB): 300 Height in mm: 640 Galvanized rollers: Ø = 50 mm scope of delivery: including supports and side guides, Kabel, ohne Frequenzumrichter Roll width in mm: 160-450, 640-1000 condition: Ausstellungsstück Roll division i ...

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles: 4 Spindle arrangement Bottom 4wkw Rights Left 5.5kw Top 4kw Feed speed adjustable by variator 4-20m/min Total power 16kw

Elements: Double-sided grinding machine 2500 C4/0E. General equipment per machine: motorized width adjustment with automatic positioning, coolant pump for coolant recirculation, 1x solenoid valve for water supply, manual glass thickness adjustment, transport belts with Low-E kit. Automatic destacking of large glass formats (6000x3210mm) from main production, which are then cut into corresponding individual panes. Further processing: individual panes can be flexibly processed further (cutting, grinding, drilling). Cleaning: afterwards the panes pass through an industrial washing and drying unit. Quality control: after cleaning, an automatic quality control is carried out using a scanner. Tempering process (ESG): panes can be fully automatically destacked or optionally passed through a tempering furnace. In the furnace, the glass is heated to approx. 600°C and then cooled to produce tempe ...

Weinig Profimat 22N ATS four-sided planer Working width 220mm Working height 120mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 5.5kw Bottom 4kw Feed speed adjustable via variator 6-22m/min Feed motor power 2.2kw Height and width set via controller Input table length 1970mm

Key data: 4 , 240 mm, 130 mm

SPECIFICATIONS: Feed length: 2500 mm Machining width: 240 mm Processing height: 130 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive (2.9 kW) Installed power: 24 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (7.5 kW) III left with electronic sideshift (7.5 kW) IV top (7.5 kW) EQUIPMENT: Complete with tools

Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.

1 Pc Used Single Column Carousel Lathe Make STANKO Mod. 1514 Bauj. 1988 Face plate diameter 1400 mm Circumferential diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 3Stages 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810T 1 pc. used two-stand vertical lathe Brand STANKO Mod. 1514 year of construction 1988 Face plate diameter 1400 mm Swing diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810 T

Dates to follow The sale is carried out on behalf of the owner from the current location in the "current state"

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

SIDEL SBO10- blowing machine, SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity., As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper., After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine:, which consists of:, 1. Preform infeed rails, 2. Preform infeed wheel, 3. Infrared oven, 4. Preform transfer wheel, 5. Blow wheel, 6. Bottle transfer wheel, 7. Bottle evacuation, GENERAL Presentation, 1. Infeed of cold preforms, Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowere ...

4-Wellen Hobelautomat SCM COMPACT 23 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern Kompositionsmaschine : 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2° Spindel und 3° Spindel : rechts vertikal und links vertical . Motorleistung PS 7.5 (Kw 5.5) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 6 / 12 mt./min max. nutzbare Arbeitsbreite mm. 230 max. nutzbare Arbeitshöhe mm. 125 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.5 HP (0.37 kW) Gewicht kg. 1600 Bedienungsanleitung CE-zertifizierung

automatische 4-wellen hobelautomat modell FUTURA MODUL 4 220 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern kompositionsmaschine (4 Spindeln, 4 unabhängige Motoren): 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2nd Spindel : rechts vertikal . Motorleistung PS 4 Kw 3) 3rd Spindel : links vertical . Motorleistung PS 4 Kw 3) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 8 / 16 mt./min max. nutzbare Arbeitsbreite mm. 220 max. nutzbare Arbeitshöhe mm. 120 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.25 HP (0.2 kW) gesamtleistung installiert PS 18,6 (Kw 14) Bedienun ...

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Key data: 4 , 230 mm, 120 mm

Chambon Made in France Four-way planer with 2 axis control (width and height) Maximum 230 x120mm Minimum 25x6 mm Feed. 6 and 12m/min. Engines; Pos. 1-2-3 = 5.5 KW Motor: Position 4 = 7.5 KW Tools: 4 planer heads standard Immediately available from stock

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system 7.5kw Down Left 11kw rights Mount 75kw Down 5.5kw Pneumatic clamps divided into 2 sections Feed speed adjustable by variator 5-24m/min CE Certificate Technical documentation Net price 68,000zł

Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Key data: 4

Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Turning- in machine for casemaking Schmedt Präkant HHS6F double action turning-in for cases up to 60x60 cm manual foot operated, so the timing of turning-in is decided by the operator

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Key data: 4 , 180 mm, 120 mm

Used machine Workpiece width 180mm Workpiece height 120mm 4 spindles: 1) Horizontal bottom 180mm 3.7kW 2) Vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kW Diameter of spindles 30mm

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Manufacturer: MEURER Type: CMK/M Angle welding machine + shrink tunnel Last used as a bundle packer for processed cheese (round cartons) El. Power: 8 kW Voltage: 380 V Condition: good, fully functional

Inv. Num. : 8894 Type: B24-TH300 DX/DW PU Producer: H&H Maschinenbau Created: 2020 Parameters: Weight: 498 kg Equipment: PUVS 280 P melting machine for 20 kg drums of PUR adhesive

Horizontal intermittent motion bagger for forming, filling and sealing duplex sachets. Mini maxi sachets: Width: 45 to 65 mm Height: 50 to 130 mm Capacity: 1.5 to 15 cm3 Volpak screw feeder: Type: DS-303 Year: 1997 Dosage volume: 1.5 to 15 cm3 Formats sold with the machine: 8 screws size 0 + 9 dosage cones 2 screws size 00 + 3 dosage cones 2 screws size 2 + 2 dosage cones 3 models of filling wand., formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303

Key data: 4 , 180 mm, 130 mm

Four-way planer Guilliet Type KXY Year of manufacture 1989 Planing width maximum 180 mm Planing height maximum 130 mm 4 planing shafts Knife length 186 mm and 136 mm Minimum planing 30 mm x 6 mm Dressing table length 2000 mm Feed speeds 6 and 12 m/min. Spindle diameter 30 mm Feed motor 0.55 kW Lower dressing shaft approx. 3.7 kW Right wave approx. 3.7 kW Left wave approx. 3.7 kW Above approx. 5.5 kW Height adjustment 0.18 kW Extraction connection diameter 160, 120 and 140 mm Including planer heads Dimensions 3200 mm x 1400 mm x height 1700 mm Weight 1200 kg The first picture shows identical machine in our warehouse

This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine.

This 4-axis HOMAG PROFI KFL20/29/QA/25 was manufactured in 2003. Ideal for efficient edge banding, this double-sided edgebander represents a robust solution for woodworking needs. Consider the opportunity to buy this HOMAG PROFI KFL20/29/QA/25 double sided edgebander. Contact us for more information.

This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.

This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine.

Key data: 4 , 230 mm, 120 mm

Four-sided planer SCM Type COMPACT 23K Year of manufacture 1997 CE Working width 230 mm Working height 120 mm 4 planing shafts equipped with planing heads Spindle diameter 40 mm Feed rates 6/12 m/min. Spindle speed 6000 rpm. Clamping length vertical spindles 140 mm Clamping length horizontal spindles 253 mm Entrance table length 2000 mm Spindle arrangement Down / Right / Left / Up Planer heads with glazing bead separation Including Tersa planer cutter heads Motor strengths approx. Bottom 5.5 kW / Right and left together 7.5 kW / Bottom 5.5 kW Dimensions approx. 3300 mm x 1600 mm x H 1600 mm Weight approx. 1200 kg

This HOMAG KF62/6/A/25 was manufactured in 1986. It includes an infeed roller conveyor and two double-sided edge banding machines, enhancing productivity with efficient transitions via rotary devices. Ideal for streamlined edge banding operations. Contact us for more information about this machine.

Equipment: Agitator,Manufacturer: RAUM Tankbau,Condition: used,Volume: 47,200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 5,000,Total height: 6,620,Wall thickness underbody: 4,Wall thickness upper floor: 4,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet: 65,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),Power: 3.5 / 12.5,Speed: 725 / 1465,Agitator: Propeller,Voltage: 400,Bottom Bearing: No,Current Interferer:

Equipment: Agitator,Manufacturer: Gebr. Hagemann Beckum,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 100,Lower shelf: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2.488,Cylindrical height: 5.350,Total height: 7.100,Wall thickness underbody: 5,Wall thickness cylinder: 6,Wall thickness upper floor: 5,Technical documents: Drawing,Manhole / dome: in cylinder, hand hole,Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN65,Note: slight adhesions,Last purpose: Chemical,Material in contact with the product: V2A 1.4301 (AISI304), Agitator:

Key data: 5 , 310 mm, 250 mm

Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space  ...

Wooden sliding door sideboard approx. 150b cm, small contents

Workshop side cabinet HAHN+KOLB approx. 60x80x70 cm, 1 door, 1 drawer

Desks and side tables light grey approx. 10 pcs., of which 3 pcs. each approx. 180x90 cm

Wooden sliding door sideboard, approx. 210x92x50 cm, small contents