side squaring used for sale

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

Auction-ID: A1-40262-172

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996

Auction-ID: A1-40262-68

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999

Key data: 4 mm, 80 , 20

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

Viewing by appointment Auction-ID: A1-40262-77

PART NUMBER 7966 SPECIFICATIONS - max planing width 770mm - max planing height on both sides 200mm - Electric top/bottom adjustment - max planing height on four sides 180mm – in advance: - pulling input shaft, toothed - Flingers - pressure - 2 pulling shafts, geared (first sequential) - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft – from below: - guide strip - Slip roller, smooth, split - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling shafts – at the rear: - 2 side spindles + pressure 1) vertical right 180mm 5.5kW 2) Vertical left 180mm 5.5kW - spindle diameter 30mm - spindles adjustable up/down, right/left - manual setting of the planing width - 4 types of feed speed 6/9/12/18m/min - 2.4kW feed motor - Extraction port diameter 160mm, 180mm, 2x120mm - dimensions l/w/h 2600x1700x1650mm - weight ...

4 SIDE PLANER machine model GUILLET KXR with n.4 spindles second hand machine in Excellent working condition - Composition : 1° shaft : surface planer . motor power Hp 7,5 2° and 3° shaft : spindle moulder . motor power Hp 7,5 4° shaft : thickness planer . motor power Hp 7,5 inlet length mm. 2000 feed speed: from 4,5 to 27 mt./min . motor power Hp 2 automatic lifting. motor power Hp 0.35 vertical and horizontal movement of 2nd and 3rd shaft vertical and horizontal movement of 4th shaft max. useful working width mm. 220 max. useful working height mm. 120 weight kgs. 1600 volt. 380/50

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano

450-550mm Auction-ID: A7-47345-1

1 - 600x6x6 cm 2 - 565x6x6 cm 3 - 500x6x6 cm

Key data: 6 , 200 mm

Front side planer / automatic planer

To generate pressure and vacuum For more details, see Operating instructions in the appendix Little used, like new

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle system: Bottom 11kw Right 11kw Left 11kw spindle angle adjustable up to 90° Right 7.5kw spindle angle adjustable up to 45° Top 11kw Feed speed adjustable via variator up to 22m/min 9kw Feed Motor Drive in the work table: – 3 rows of grooved pulling rollers in front of the first head – 5 rows of smooth pulling rollers Top drive: – 9 rows of pulling rollers Machine weight 6100kg Machine dimensions 470x190x160cmH

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...

Key data: 6 , 220 mm, 120 mm

WEINIG 4-sided planing machine model U22A with soundproof cabin Spindle arrangement: R - L - R - O - U - L

Key data: 4 , 180 mm, 120 mm

Connected load 380V 46A Planing width 180 mm Planing height 120 mm Length of mounting table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds Electric height adjustment 4x star-delta switch 2x Low Pressure Holder Iewdlj0 1x Side Pressure Holder 2x steel feed shafts 1x rubberized pull-out roller Extraction connection 4x120 mm Workshop overhauled

Key data: 4 , 180 mm, 105 mm

Planing width min max 23 – 180 mm Planing height min max 6 – 105 mm Min workpiece length 300 mm Feed speed 6 and 12 mm Spindle speed 6000 rpm Spindle 35 mm Vertical shaft engine 7.5 kw / 10 hp Horizontal shaft motor 7.5 kw / 10 hp Clamping length of vertical shafts 120 mm Clamping length of horizontal shafts 190 mm Min max tool diameter On vertical shafts 100-120 mm Profiling option without axial adjustment on the vertical shafts Feed rollers D 120 mm Dressing table length 1700 mm Manual lubricant pump included as standard Planer heads Tersa (on request) Suction nozzle D 120 mm 4 pcs. Ce version

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Type: ELMO-G 2BH1 490-1AH13 2-flute pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V frequency 50/ 60 Hz Degree of protection: IP54 New !

Side channel blower EG&G ROTRON DR068DJ9Y Flow rate: 21.6 m3/h 75 Watt 110 / 220 V (luminous flux) Dimensions: 220 x 190 x 180 mm

Vacuum pump, side channel compressor, side channel vacuum pump, with suction filter RIETSCHLE SKG 314-2.02 ( SKG314-2.02 ) ports: 3 ( inches ) motor: 4.0 kW 2850 rpm 230 / 400 V 3AC 50 Hz IP54 intake filter: MANN 45 138 77 126 used, checked! Dimensions: 880 x 670 x 420 mm

Side channel pump, chemical pump, water pump, centrifugal pump ALLWEILER SOV 212 WG11T 12 motor: 1.5 kW 220 / 380 V EExe II (Roman. 2) explosion-proof ! used, tested !' IP54 Dimensions: 650 x 220 x 270 mm

Side broom Kärcher 6.903-380.0 Dimensions: 450 x 450 x 150 mm Weight: 1.7 kg

Single-stage side channel pump, oil pump, coolant pump LUKRA PUMPS, LUTZ KRACHT SS13 flow rate: 20 l/min motor : 0.25 kW 220 - 250 / 380 - 440 V IP 44 used, tested ! Dimensions: 210 x 150 x 230 mm

Side broom Kärcher 6.905-624.0 Dimensions: 450 x 450 x 150 mm Weight: 1 kg

Machine foot set with side orientation, wedge feet, levelling shoe PAGUS support height: 84 - 90 mm side orientation: 10 mm support surface: 170 x 110 mm weight: 14.25 kg 2 pieces each Dimensions: 260 x 165 x 125 mm

Sell Fenwick S30W diesel sideloader, 3 Ton capacity, telescopic forks, maximum height 5.3 meters, 3021 hours, Up-to-date revisions. Video on Demand

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

Elmo G 200 Side Channel Compressor 8.5kW 2915rpm Unused Replacement Machine Weight approx. 180kg The cover on the engine at the rear is missing. unused replacement device. Was in stock, in case the first machine should fail. From insolvency

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton

Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991

with packing device