128,878 used machines on RESALE, but how to find them? Machine Search
CATALOG NO. 6904 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up / down, right / left - spindle 1,2,3,4,5 equipped with an electric brake - spindle diameter 40mm - 5 introductory, toothed, pulling rollers from above - from above, 4 rollers, pulling, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed - feed motor 4kW - working pressure 6-10 bar - electric setting of planing thickness - motor lifting the body of about 0.55 kW - central lubrication of the co ...
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 310/220/H270 mm -Weight: 8.2 kg
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 ID -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 370/220/H225 mm -Weight: 7.9 kg
MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg
used
Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller
Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg
Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg
Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...
Key data: 5 , 300 mm, 200 mm
Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg
• Equipped for toploader boxes • Output max. 20 cartons/min • Blank magazine • Blank transport • Gluing station with 2 glue nozzles for side flaps with Robatec Concept 4 hotmelt gluer • Folding station with folding stamp • Carton discharge with outfeed conveyor • Vacuum generation with Venturi nozzles • Touch screen Siemens Pro-Face • Elau Pac-Drive control with 1x Max-4 and 4x MC-4 • 4 formats for toploader cartons: • Blanks: 225x204, 284x263, 284x348, 397x458 mm • Ready glued WxDxH in throughfeed direction: 70x95x35, 70x95x65 mm and 70x182x65mm, 70x182x120 mm, other formats possible • Drive 24/400V/50Hz • Qualification documentation (IQ/OQ)
Leadermac 823 Hypermac four-sided planer Working width 230mm Working height 160mm Number of spindles: 8 Spindle system: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left7.5kw 4.Top7.5kw 5.Right 7.5kw 6.Left7.5kw 7.Top11kw 8.Bottom 11kw Feed speed 50m/min Pulling rollers in the table Upper and lower spindles with supports Pneumatic clamps
Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -
Landing height approximately: 1400 mm Auction-ID: A1-41275-290
CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...
Battery test result 100% Auction-ID: A1-40975-2
Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price
CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts ...
CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...
CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...
CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...
Key data: 6 , 230 mm, 150 mm
I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.
maximum number of results exceeded
please refine your search
100 € 
