129,254 used machines on RESALE, but how to find them? Machine Search
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...
Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional
PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes
I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.
SPECIFICATIONS: Max. cutting length: 3000 mm Max. cutting height: 50-60 mm Manual Saw Blade Feed Adjustable cutting width Electric/pneumatic operation
SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide
- The surplus collection transfer is NOT included (marked in photo number 2). - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-99
Casolin sliding table machine mod. Used Astra DGT with digital parallel guide control Carriage mm 3200 with sliding on 8 rollers Blade diameter max mm. 400 Engraver with independent motor and electro-pneumatic start-up intervention Maximum opening parallel guide mm 1300 with controlled axis Automatic star/delta blade motor start Installed power 4.5 Kw Possibility of removing the parallel guide by unscrewing a single knob Parallelogram protection rotation for passage of tall workpieces Year of manufacture 2004 CE compliant
Front brush, front sweeper, sweeping roller, sweeping brush -Side brush: Side brush for sweepers -Drive shaft: Ø 85 mm -Dimensions: Ø 440 x 250 mm -Weight: 2.9 kg
Equipment & Technology • 3-side tilt function (left/right/rear) • Robust steel superstructure with stable side walls • Removable side walls • Air brake system (2-circuit system) • ALB (automatic load-dependent brake force control) • Tyres: 425/65 R22.5 • V-drawbar with towing eye • Hydraulic tilting cylinder • Tarpaulin (yellow) available • Inside with tension rod / safety system • 40 km/h version Known defects • Drawbar bent • Cross brace / tension rod in the structure bent / damaged at the top center (see pictures) • Tarpaulin torn / damaged Contact: Julia Lorz– Surplex E-mail: j.lorz@tbauctions.com Phone: +49 1736040915 Auction-ID: 04G-E1N-2
used
4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!
Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!
Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!
Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New
Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New
Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...
MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300
Collar shelving, double-sided, 3, 50 m height, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.750.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
Collar shelving, single-sided, 3 m height, 1, 20 m arms, 500 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.150.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 500 kg = 2,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor.
Collar shelving, double-sided, 3, 50 m height, low-1, 20 m, 750 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.900.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 750kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Collar shelving, single-sided, 3 m height, low-1, 20 m, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...
Collar shelving, single sided, 4, 16 m high, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.450.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 720 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr
Double side labeler incl. round labelling function, built in year of 2019, capacity approx. 30-35 cycles / min. Label length 20-300 mm / label height 160 mm / container diameter 20-110 mm The price is EURO 24.500,--.
MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50
The cross-welding stamp of the packaging machine is closed by a servo motor and is infinitely variable. The width of the infeed belt is infinitely adjustable via a hand crank, which allows perfect, simple and uncomplicated adjustment of the product width. The parameters are entered via a modern, easy-to-use touch screen. The flow length is controlled photoelectrically, so that different package lengths can be packed one after the other and one after the other. The machine is technically designed for very tight, perfect shrink-wrapping of the products, so that optimal packaging results are achieved in any case. The machine works with an automatic film feeder, it is possible to work with different transport speeds. Longitudinal and transverse welding are permanently heated and easy to control via the touch screen. Product Dimensions: Length: min. 50 mm, max. endless Width: min. ...
Make: HERMA Type: 362E S Year of Make: 2021 Serial No.: 857430 In the current production, the following products have been labeled: Wall-mounted dispenser bottle: 1000 ml WSP Length x Width (mm): 79.5 ± 1.5 x 102 ± 1.5 Height (mm): 197 ± 1.5 Label Height x Length (mm): Front Label: 97 x 57 Back Label: 97 x 55 Booklet 2 Handle Bottle "2000 ml" Length x Width (mm): 157 ± 2 x 85 ± 1 Height (mm): 308.5 ± 2.5 Label height x length (mm): Front side label: 128 x 80 Back label: 128 x 80 Booklet lid label: 95 x 25 Dismantling / packaging / loading by specialist companies: - Dismantling of two-sided labeller Fabr.: HERMA - Plant components are mounted on wooden pallets and marked - Disassembling the system, packing and transporting it from production to the outdoor area. - Securing the components on Euro pallets with strapping and stretch film - Loading onto trucks
• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...
Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
maximum number of results exceeded
please refine your search
700 € 
.jpg)
