side squaring used for sale

Electric multidirectional sideloader / FOUR-WAY REACH TRUCK, MQ 30, Hubtex – second-hand - : Price on request / against bid! Manufacturer: Hubtex Type: MQ 30 Series; 2121 Year of construction: 2020 Load capacity (kg): 3,000 Lifting height (mm): 5,100 Fork length (mm): 850 Curb weight without battery; 4.770kg 48V, nominal drive power: 2x4kW Operating hours: approx. 800 h Former new price: 122.000 € Battery: 48V, Type: 48 V 5 HPzS 775 775 Ah, weight: 1,267kg, 24 cells Year of construction. 2020 Incl. charger Condition: very good Available: now Location: 74906 Bad Rappenau

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side rail set -Type: 7607/350/2S-RER-SET/9006/1 -Item no.: 45859-01 -Length 350 mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 350/100/H40 mm -Weight: 0.3 kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/300/2S-RER-SET/9006/1 -Item no.: 45858-01 -Length 300mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 300/100/H40 mm -Weight: 0.3kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set

Vacuum pump, side channel compressor, side channel vacuum pump, with frequency converter BECKER SV 7.190/1-401( SV7.190/1-401 ) overpressure: max. 230 mbar vacuum pressure: max. -235 mbar pumping speed: 345 m3/h 5 connectors: 2 (inch) motor: 4.0 kW 5800 rpm 360 / 528 V 3AC 50 / 60 Hz IP54 used, checked! repaired! Dimensions: 450 x 310 x 460 mm

Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price

CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...

CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts  ...

CATALOG NO. 6873 TECHNICAL DATA - max width of the processed element 240mm - max height of the processed element 190mm 4 spindles: 1) horizontal bottom 240mm 5.5kW 2) vertical right 190mm 5.5kW 3) vertical left 190mm 7.5kW 4) horizontal top 240mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 6 pulling and toothed input rollers from above - 2 output, pulling, rubber, smooth rollers from above - from the bottom, a toothed input roller, pulling and turning in the tabletop in front of the first spindle - 2 pulling rollers from the bottom, metal, smooth - 4 side pressures from the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth adjustment of the feed speed on the inverter 6-30m/min - 3kW feed motor - working pressure 8-10bar - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication o ...

CATALOG NO. 7165 TECHNICAL DATA - max width of the processed element 180mm - max height of the processed element 120mm 4 spindles: 1) horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5.5kW - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure at the insertion - 6 introducing, pulling and toothed rollers, including 2 double ones - double output, pulling, rubber roller from above - at the bottom, an introducing, pulling, toothed, wide, metal roller - a pulling, metal, smooth roller from the bottom - 2.2kW feed motor - feed on cardan shafts - smooth regulation of feed speed - electric setting of planing thickness - lifting motor 0.75kW - central lubrication of the countertop - length of the introductory tabletop 1580mm - diameter of the exhaust pipe 4x120mm - dimensions length/width/h ...

CATALOG NO. 6903 TECHNICAL DATA - max width of the processed element 230mm - max height of the processed element 160mm - number of spindles 5: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm, electrically adjustable right/left 7.5kW 4) horizontal top 230mm, electrically adjustable up/down 11kW 5) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm in advance: - 6 pulling and toothed input rollers, including 2 double rollers 2 pulling, rubber, double output rollers from down: - toothed pulling, metal, swivel input shaft - smooth metal pulling roller - side pressure - pneumatically adjustable rollers - length of the introductory tabletop 1980mm - central lubrication - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - feed on cardan shafts - feed m ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310 mm -Weight: 20 kg

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/450/2S-RER-SET/9006/1 -Item no.: 45861-01 -Length 450 mm -Quantity: 4x set available -Price: per set / minimum order 2 sets -Transport dimensions: 450/100/H40 mm -Weight: 0.4kg/set

Key data: 6 , 230 mm, 150 mm

I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

Four-sided planer Weinig Profimat 26 Super Working width 260mm Working height 160m Number of spindles: 5 Spindle system Bottom 7.5kw Rights 7.5kw Left Mount 7.5kw Bottom 4kw Pneumatic clamps Feed speed adjustable on variator 5-24m/min Eclectic height and working width adjustment Entrance table length 2000mm CE Certified

Four-sided planer Weinig Profimat 22N Working width 220mm Working height 120 mm Number of spindles: 6 Spindle system Bottom 4kw Rights 5.5kw Left Mount 5.5kw Bottom 4kw Universal 4kw Spindle diameter 40mm Spindles adjustable in two planes Feed speed adjustable on variator 6-22m/min

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Busch, side channel blower side channel blower -Type: SB 0140 D OHU UC XX -Drive: 0.70 kW -Speed: 2800 rpm -Connection input: Ø 45 mm -Connection output: Ø 45 mm -Dimensions: 285/240/H300 mm -Weight: 12.9kg

SCM P64 four-sided planer Working width 180mm Working height 100mm 4 spindles Spindle system: Bottom 4kw Right/Left 5.5kw Mountain 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table with a length of 2300mm Machine dimensions: 3300x1200x1600mm

electric height adjustment, lubricant pump, dust tested ---------- Technical Data ---------- Planing width: 220 mm, Planing height: 120 mm, Number of spindles: 4, Motor spindle 1: 4 kW, Motor spindle 2 + 3: 7.5 kW, Motor spindle 4: 5.5 kW, Feed speeds: 6-22 rpm, Suction nozzle : 120/120/120/140 mm, Dimensions (LxWxH): 3,450x1,400x1,400 mm Sold as is, without technical inspection

Key data: 5 , 230 mm, 120 mm

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

Key data: 6 , 230 mm, 180 mm

FOUR-SIDED PLANER VINOUS Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm Bgooeilcyar 6 Spindle

Four-sided planing and roll forming machine SCM COMPACT 23 max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle approx. 4 kW Motor power vertical spindles approx. 5.5 kW Motor power upper horizontal spindle approx. 5.5 kW Infeed table length 2000 mm Motorized height adjustment of the feed system Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION

Glass transport rack, glass plate frame, 2-sided, stackable PAGUS loading height: max. 1300 mm loading width: max. 1200 mm loading depth: max. 240 mm loading: 2-sided Material: steel, galvanized with crane eye used, tested ! Dimensions: 1200 x 810 x 1650 mm

4-sided planer Fabr. Vinous Type U 23 E blue class YOC 2001 with 6 spindle + horizontal sawing unit 1 Sp. U-5,5 Kw 2-3 Sp. R/L 7.5 Kw 4 Sp.R 5,5 kw 5 Sp. Ø 7,5 Kw 6 Sp. U 5,5 Kw 7 horizontal sawing unit 2.2 kw (glazing bead saw) with button pressure yes-no Working width 20-230 mm Working height 8-120 mm Spindle 40 mm Feed rate 5-24 m/min 4 Kw Dressing table 2.5 m manuele waxilite pump two driven rollers in machine table

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

Key data: 4 , 220 mm, 150 mm

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

SECOND-HAND 4 SPINDLES FOUR SIDE MOULDER SCM MOD. SINTEX XL – CE RULES Spindle configuration: bottom right left top - working width mm 180 - working height mm 120 - year 2001

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996

SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - n.2 motors 2 hp - n. 2 blades diam. 350 mm - min / max working length 220/1200 mm - cutting inclinations: horizontal +/- 35°; vertical +/- 35° - volt. 380/50 - year 1995

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999

SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - n.2 motors 2 hp - n. 2 blades diam. 350 mm - min / max working length 220/1200 mm - cutting inclinations: horizontal +/- 35°; vertical +/- 35° - volt. 380/50 - sn 961227 - year 1996

Four-sided planer REX HOMS-410 – made in Germany – for wet wood TECHNICAL PARAMETERS: planing width max. 410 mm planing height on both sides 200 mm planing height on four sides 200 mm spindle diameter 40 mm shaft motor power 2 x 11 kW spindle motor power 2 x 5.5 kW feed speed infinitely adjustable feed speed adjustable on the inverter three upper pulling rollers three lower pulling rollers two auxiliary rollers in the table top brake minimum workpiece length 450 mm dimensions of the machine (length/width/height) 250 / 220 / 180 cm weight ~ 3500 kg

Conveyour 3to1 Line with Motor  Length 1,5m Wide 0,45 More then 300 machines new and second hand on our seema .de

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

4 SIDE PLANER machine model GUILLET KXR with n.4 spindles second hand machine in Excellent working condition - Composition : 1° shaft : surface planer . motor power Hp 7,5 2° and 3° shaft : spindle moulder . motor power Hp 7,5 4° shaft : thickness planer . motor power Hp 7,5 inlet length mm. 2000 feed speed: from 4,5 to 27 mt./min . motor power Hp 2 automatic lifting. motor power Hp 0.35 vertical and horizontal movement of 2nd and 3rd shaft vertical and horizontal movement of 4th shaft max. useful working width mm. 220 max. useful working height mm. 120 weight kgs. 1600 volt. 380/50

REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2nd and 4th side 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm Transport dimensions 420 x 230 x 230 cm weight ~ 5  ...

Key data: 4 mm, 80 , 20

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

SCM moulder model SUPERSET 23 with 5 shafts: - Useful working dimensions 230x120mm - Alfasistel electronic control for 2-axis programming - Cardan drive and differentiated pneumatic pressure - Variable feed speed from 4 to 26 m/min - feed unit before the 1st shaft, with quick override - drive roller in the plane after the 5th shaft - 2500mm entrance level - Deck lubrication pump - shafts D=40mm at 6000rpm - Complete with 4 knife heads Trees: - Under HP -right - Left (right+left with single HP engine) - Above HP - Under HP

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 400 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 200 / 201 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Bearing Assembly - Blower Side (p.n. 32) for ABB VTR 400 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Bearing Assembly - Blower Side (p.n. 32) for ABB VTR 200 / 201 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).