129,243 used machines on RESALE, but how to find them? Machine Search
This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.
This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine.
This HOMAG KF62/6/A/25 was manufactured in 1986. It includes an infeed roller conveyor and two double-sided edge banding machines, enhancing productivity with efficient transitions via rotary devices. Ideal for streamlined edge banding operations. Contact us for more information about this machine.
Equipment: Agitator,Manufacturer: RAUM Tankbau,Condition: used,Volume: 47,200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 5,000,Total height: 6,620,Wall thickness underbody: 4,Wall thickness upper floor: 4,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet: 65,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),Power: 3.5 / 12.5,Speed: 725 / 1465,Agitator: Propeller,Voltage: 400,Bottom Bearing: No,Current Interferer:
Equipment: Agitator,Manufacturer: Gebr. Hagemann Beckum,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 100,Lower shelf: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2.488,Cylindrical height: 5.350,Total height: 7.100,Wall thickness underbody: 5,Wall thickness cylinder: 6,Wall thickness upper floor: 5,Technical documents: Drawing,Manhole / dome: in cylinder, hand hole,Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN65,Note: slight adhesions,Last purpose: Chemical,Material in contact with the product: V2A 1.4301 (AISI304), Agitator:
Key data: 5 , 310 mm, 250 mm
Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space ...
Wooden sliding door sideboard approx. 150b cm, small contents
Workshop side cabinet HAHN+KOLB approx. 60x80x70 cm, 1 door, 1 drawer
Desks and side tables light grey approx. 10 pcs., of which 3 pcs. each approx. 180x90 cm
Wooden sliding door sideboard, approx. 210x92x50 cm, small contents
Workshop side cabinet metal green approx. 80x85x5t cm, without contents
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22
Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.
Min./max. thickness edge banding on roll: 0,4 - 3mm Min./max. thickness edge banding in strips: 5 mm Min./max. panel thickness: 8 - 50mm Min. panel length/width: 190/110mm Throughput speed: 9m/min Pre-milling unit: 2,2kW 7200 rpm Sprayers release agent Panel heating device Automatic laoding for edges Gluing unit: 0,18kW End-cutting unit with radius: 0,19kW Trimming unit: 2x 0,35kW, 12000rpm Rounding unit up to 3mm: 0,35kW Edge scraping unit Sprayers cleaning agent Glue scraping unit Brushing unit
4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Lower floor: flat bottom with slope,Design: upright,Standing shape: flat bottom,Insulation: available,Insulating sheath: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,500,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 80,Remarks: Container feet are spacers for the Substructure/foundation,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:
Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Volume: 50,000,Lower bottom: conical bottom,Design: standing,Stand shape: feet height-adjustable,Number of feet: 6,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,350,Cylindrical height: 5,500,Total height: 7,700,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: present,Last use: food, Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No
Equipment: Agitator,Condition: used,Volume: 39,000,Design: upright,Standing shape: Feet height adjustable,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 4,750,Total height: 5,800,Manhole / dome: in the top floor,Type plate: No,Equipment: Ventilation/venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: 1 container without ventilation hood,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 5, Speed: 980,Agitator: Propeller,Voltage: 380,Bottom Bearing: No,Current Jammer: No,Agitator Arrangement: Laterally
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
SCM moulder model LOGIC 23 with 6 shafts: - useful working dimensions 230x120mm - cardan drive and pneumatic pressure - Forward speed 4 - 32 m/min with variable speed drive - upper feed unit before the 1st shaft - tandem feed unit in front of the 2nd shaft - 2500mm inlet floor - grooved plane from the 1st to the 5th shaft - Deck lubrication pump - shafts D=40mm at 6000rpm - maximum diameter of profile tools 200mm - complete with helical knife heads Trees: 1- below 2- right 3- Left 4- above 5- below 6- Universal Machine not compliant with CE regulations, for export
Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC
Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano
Key data: 3
Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg
Side Pastry Filler / Berlin Filler with 1 Piston NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture
Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planer heads rear left and right All planing shafts as 4-knife shaft Automatically adjustable table height with dressing table adjustable up to 12 mm Dressing table with table extension Feed rate 7-9-11,5 / 14-18-23 m/min. 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller
Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers
Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05
Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton
Pressure total: 630 ton Stroke: 900 mm Daylight: 1550 mm Table surface area : 2500 x 1730 mm Slide area: 2500 x 1730 mm Die cushion capacity in table: 230 ton Die cushion stroke: 400 mm Die cushion pad area: 2150 x 1540 mm Approach speed: mm / sec Working speed: mm / sec Return speed: mm / sec Oil volume: 2000 l Required power: kW Weight of machine approx.: 200 ton
Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton
Goods sales shelves double-sided Tegometall approx. 350x105x140cm (WxDxH), colour grey, rear wall panels closed, side panelling blue on one side, opposite shelf part on the front side, various shelves 50/40cm deep, without sales goods
Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton
Merchandise sales shelves one-sided Tegometall approx. 400x65x140cm (WxDxH), colour white, rear wall panels closed or perforated wall, without shelves, without sales goods, in vestibule, with display case lockable, dimensions approx. 100x50x200cm (WxDxH)
Goods sales shelves double-sided Tegometall approx. 450x105x140cm (WxDxH), colour grey, rear wall panels closed, further shelf on the sides, opposite cladding blue, various shelves 50/40cm deep, without sales goods
Four-sided planer Casadei C4 Working width 220mm Working height 120mm Number of spindles 4 Spindle layout: 1.Lower 4kw 2.4kw rights 3.Left 4kw 4.Upper 4kw Spindle speed 6000r.p.m Feed speed adjustable by variator 4-21m/min Tool size 125-140mm Cardan shaft driven feed Technical documentation
Goods sales shelves double-sided Tego metal approx. 200x105x140cm (WxDxH), colour grey, rear wall panels closed décor wood light, side panelling blue on one side, various shelves 50/40cm deep, covered with wooden platforms in the floor area, 2 pieces, without sales goods
Goods sales shelves double-sided Tegometall approx. 250x105x140cm (WxDxH), colour grey, rear wall panels closed Decor wood light, further shelf on the sides, various shelves 50/40cm deep, 3 pieces, without sale goods
Goods sales shelves double-sided Tego metal approx. 200x105x140cm (WxDxH), colour grey, rear wall panels closed décor wood light, side panelling blue on one side, various shelves 50/40cm deep, covered with wooden platforms in the floor area, 2 pieces, without sales goods
Goods sales shelves double-sided Tegometall approx. 350x105x140cm (WxDxH), colour grey, rear wall panels closed, side panelling blue on one side, opposite shelf part on the front side, various shelves 50/40cm deep, without sales goods
Merchandise sales shelves Tegometall on one side approx. 700x65x140cm (WxDxH), colour grey, rear wall panels closed, further shelf on the sides, various shelves 50/40cm deep, clad with wood on the back, without sales goods, without article security Item 091
Goods sales shelves double-sided Tego metal approx. 300x105x140cm (WxDxH), colour grey, rear wall panels closed, side panelling blue on one side, various shelves 50/40cm deep, without sales goods
Goods sales shelves double-sided Tego metal approx. 200x105x140cm (WxDxH), colour grey, rear wall panels closed Oak décor light oak, side panelling blue on one side, opposite shelf part at the front, various shelves 50/40cm deep, without sales goods
maximum number of results exceeded
please refine your search
3 € 
