side grinding used for sale

Dimensions (L/W/H): 3630x1790x1760 mm Weight: 4300 kg Total power requirement: 42,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Horizontal intermittent-motion bagging machine, to form, fill and seal duplex sachets., Mini maxi sachets :, - Width: 45 to 65 mm, - Height: 50 to 130 mm, - Contents: from 1.5 to 15 cm3, Volpak screw feeder:, Type : DS-303, Year: 1997, Dosing volume: 1.5 to 15 cm3, Formats sold with the machine:, 8 screws size 0 + 9 dosage cones, 2 screws of size 00 + 3 dosing cones, 2 screws of size 2 + 2 cones dosage, 3 models of filling wand., Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303

Inv. Num. : 8894 Type: B24-TH300 DX/DW PU Producer: H&H Maschinenbau Created: 2020 Parameters: Weight: 498 kg Equipment: PUVS 280 P melting machine for 20 kg drums of PUR adhesive

Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height adjustmentTechnical data: Planing width (finished size) min./max. 18 - 180 mm planing height (finished size) min./max. 7 -120 mm Min. workpiece length (single workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter

Number of spindles: 4 St. Working width: 15 - 230 mm Working height: 10 - 125 mm Feed speed: 6 - 24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.

working length: 1000-1600 mm working width: 40-150 mm Thickness: 10-80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 6 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 , 310 mm, 250 mm

Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space  ...

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Side Pastry Filler / Berlin Filler with 1 Piston NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Type: Elmo-G 2BH1 603-1AC11-Z -Drive: 2.2 kW -Speed: 2860 rpm -Connection input: Ø 38 mm -Connection output: Ø 50 mm -Dimensions: 380/380/H380 mm -Weight: 28 kg

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 245-2 -Drive: 1.1 kW -Speed: 2850 rpm -Flow rate: max. 170 m³/h -Compression pressure: 130 mbar -Number: 1x compressor available -Price: per piece -Dimensions: 450/310/H370 mm -Weight: 27 kg

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side rail set -Type: 7607/350/2S-RER-SET/9006/1 -Item no.: 45859-01 -Length 350 mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 350/100/H40 mm -Weight: 0.3 kg/set

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension Telescopic slides, extension slides, heavy-duty extension slides, side rails, front extension slides, drawer side rails -Manufacturer: Grass, Nova Side Rail Set Original Packaging -Type: 7607/300/2S-RER-SET/9006/1 -Item No.: 45858-01 -Length 300 mm -Quantity: 7 sets available Price: per set / Minimum order 2 sets -Transport dimensions: 300/100/H40 mm -Weight: 0.3 kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/450/2S-RER-SET/9006/1 -Item no.: 45861-01 -Length 450 mm -Quantity: 4x set available -Price: per set / minimum order 2 sets -Transport dimensions: 450/100/H40 mm -Weight: 0.4kg/set

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310mm -Weight: 20kg

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm -Weight: 80 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: 4 kW -Speed: 2850 rpm -Flow rate: max. /h -Compression pressure: mbar -Number: 2x compressors available -Price per piece -Dimensions: 650/480/H555mm -Weight: 76 kg/pc.

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor with reversing valve -Type: Elmo-G 2BH6 000-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Reversing valve: Wachenhausen GHDM7 -Dimensions total: 430/370/H380 mm -Weight: 38 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Manufacturer: Bito, cantilever rack one-sided base bay type KR29 L height 1980 mm -Stands: 4 pieces 1980/605/55 mm grid 60 mm adjustable -Cantilever arm length: usable depth 500 mm / 29 pieces -Load capacity per cantilever arm, max. 175 kg, see photo type plate -Cross braces: 6 pieces 1060/140/60 mm -Transport dimensions: 2100/760/H150 mm -Total weight: 180 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000

Manufacturer: IMA Nowimat Leistenmaschine, Type: U/F/12/360, Year: 1996, Min-max edge material mm: 3-12, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 10-25, Premilling: yes, Application of separation agent: no, Coil magazine: 1-fach, Strip magazin: Ja, Min.-max. batten magazine mm: yes, Mitre stations: yes, Radius milling axis adjustment: yes, Corner tracing type: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: no, Bonding part EVA: yes, Groove milling: Freiplätze 3, Workpiece support: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1996

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...