side grinding used for sale

Side Channel Vacuum Pump GARDNER DENVER SAP 710 (01) 740 m3/h 250 - 270 mbar Engine: 7,5 KW 400 / 690 V IP55 used, tested ! with new mufflers !; Dimension: 800 x 560 x 680 mm

Side Channel Vacuum Pump, Side Channel Compressor SIEMENS ELMO-G 2BH1 610-1HC32 Motor: 4.0 kW 2895 rpm 200 / 380 V 3AC used, tested ! Dimensions: 650 x 480 x 430 mm

Side channel vacuum pump, side channel compressor SIEMENS ELMO-G 2BH1 610-1HC32 motor: 4.0 kW 2895 rpm 200 / 380 V 3AC used, tested ! Dimensions: 570 x 500 x 430 mm

Side Channel Vacuum Pump, Side Channel Compressor HAPRO SCL K05-MS MOR Motor: 3-90L 2.2 kW 2850 rpm 230 / 400 V 3AC used, tested ! Dimensions: 540 x 320 x 380 mm

Side Channel Vacuum Pump, Side Channel Compressor BECKER SV300/1 pumping speed: 325 m3/h Final compression pressure: +370 mbar Final vacuum pressure: - 290 mbar engine: 2SIE100L2B-B 4,0 KW 2910 rpm 230 / 400 V 3AC IP55 including two filter cartridges 90951030000 New, with documents ! Dimensions: 525 x 500 x 425 mm

1Vacuum pump, side channel blower, side channel vacuum pump SIEMENS elmo-G 2BH1610-1HC21 p ( int ): max. 2 bar abs.. Connection diameter: Ø 50 mm motor: 3.0 kW 2895 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 700 x 500 x 410 mm

Wood connectors, disc dowels, double-sided, galvanized BULLDOG D117 FVZ Product no.: 12117002 diameter: Ø 117 mm bore for construction screw: Ø 50 mm a box contains 25 wooden connectors ! New ! Dimensions(single connector): Ø 117 x 30 mm Dimensions(box): 380 x 140 x 140 mm

Wooden connector, disc dowels, double-sided, galvanized BULLDOG D62 AVZ Product no.: 12062004 diameter: Ø 62 mm bore for construction screw: Ø 20 mm a box contains 100 wooden connectors !. New ! Dimensions(single connector): Ø 62 x 17 mm Dimensions(box): 380 x 140 x 140 mm

Machine foot set with side alignment, wedge feet, leveling shoe PAGUS Support height: 84 - 90 mm side orientation: 10 mm Support surface: 170 x 110 mm Weight: 14.25 kg each 2 pieces each Dimensions: 260 x 165 x 125 mm

Key data: 5 , 260 mm, 180 mm

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

Transnorm right flush roller conveyor 3470-1830-1450 RA1855 Make: Transnorm Basic dimensions: conical structure, 3470x1160-1830 mm Length: 3470 mm Nominal/external width (NB): 1160-1830 mm Roll length (RB): 160-450 mm & 640-1000 mm Frame height: 290 mm Currently set height: 640 mm Height of side guide: 410 mm Width (height) side belt 300 mm Roller diameter: 50 mm Roller pitch: 65 mm Including 8 feet Motor MOVI-Mot 3x300-500V 1,5kW Conveying speed: Features: Construction year: 2017 Conveying length in mm (NL): 3470 Optional erhältlich: Frequenzumrichter Electric data: 70Hz, 217 / 375 V Antrieb: Nord-Drivesystem Supports: 8 Bauhöhe in mm (BH): 290 Belt width in mm (GuB): 300 Height in mm: 640 Galvanized rollers: Ø = 50 mm scope of delivery: including supports and side guides, Kabel, ohne Frequenzumrichter Roll width in mm: 160-450, 640-1000 condition: Ausstellungsstück Roll division i ...

Key data: 5 , 300 mm, 200 mm

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

working width: 180 mm; working height: 120 mm; number of spindles: 4; Spindle configuration: unten, rechts, links, oben; motor shaft spindle down: ca. 5,5 kW; motor shaft spindle top: ca. 5,5 kW; motor shaft spindle right: ca. 5,5 kW; Motorleistung Welle left: ca. 5,5 kW; adjustment shaft down: Kurbel; adjustment shaft right: Kurbel; adjustment shaft left: Kurbel; adjustment shaft top: elektrisch; cutter heads: Wendemesser; feed speed: stufenlos; feeder pressure: Feder; power consuption: 20 kW; motorbrake: - ; weight:

Key data: 6 , 220 mm, 160 mm

Weinig Unimat 22 e 6 spindles Fluted table Short Parts Packages x 2

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: Sicar, Type: P5N/230, Year: 1989, Control: yes, Planing widht mm: 230, Planing hight mm: ca.130, Number of spindles: 5, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Feeding - kW: 1,5, 1.Bottom spindle kW: 5,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4.Top spindle kW: 7,5, 7th universal on left kW: 5,5, Year :1989

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012

Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986

Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003

Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000

Manufacturer: KDP Kantenanleimmaschine, Type: KDP 111 SL, Year: 1995, Min-max edge material mm: 0,5-2,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Lasertechnik: yes, Mitre stations: yes, Radius milling axis adjustment: no, Year :1995

Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000

Manufacturer: Homag, Type: KLO 76, Year: 1994, Min-max edge material mm: 0,5-3,0, Min.-max. workpiece length in mm: 150, Edgeband height max mm: 55, Min-max feed m/min: 10-25, Premilling: no, IR zone: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, radius milling: yes, 4 motors: yes, Radius scraper: yes, Flat scraper: yes, 4 motors: yes, Ersatzverleimteil : yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: yes, Roller/belt: Riemen, Compressed air bar: 6, Machine lenght mm: 7500, Noise enclosure: yes, Year :1994

Manufacturer: IMA Nowimat Leistenmaschine, Type: U/F/12/360, Year: 1996, Min-max edge material mm: 3-12, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 10-25, Premilling: yes, Application of separation agent: no, Coil magazine: 1-fach, Strip magazin: Ja, Min.-max. batten magazine mm: yes, Mitre stations: yes, Radius milling axis adjustment: yes, Corner tracing type: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: no, Bonding part EVA: yes, Groove milling: Freiplätze 3, Workpiece support: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1996

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 180, Planing hight mm: 120, Number of spindles: 7, Elektronische Achsverstellung: no, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 350, Wellendrehzahl: 6000, Spindles: 6, Spindle diameter in mm: ca 40, Spindle arrangement: U / R / L /R / O / U / Uni, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 4, 4th spindle on right kW: 4, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4, 7th universal on left kW: 4,

Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000

Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996