side grinding used for sale

Manufacturer: IMA, Type: AVM/K/I/G 80/822/SR/ L 20, Year: 1991, Min-max edge material mm: 3-15, Work piece width min-max mm: 80, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 50, Min-max feed m/min: 18, Finished product: Leistenmaschine, Premilling: yes, Fine milling: yes, Coil magazine: yes, Min.-max. batten magazine mm: 3-15, Mitre stations: yes, Pre-milling: yes, Top pressure belt/roller: Rolle, Kantenschleifen gerade: yes, Kantenschleifenradius: 2, Werkstückunterstützung: yes, Compressed air bar: 6, Machine lenght mm: 11000, Year :1991

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720 V/Compact, Program: yes, Control: no, Min-max edge material mm: 3, Work piece width min-max mm: 60, Min-max edge material mm: 3, Work piece width min-max mm: 60, Edgeband height max mm: 70, Min-max feed m/min: 3, Finished product: 250, Soft forming: 2, Axis control: no, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Granulat und PU, Profile milling: no, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, IR zone: MFA 843, Coil magazine: yes, Strip magazin: yes, Radius milling axis adjustment: Riemen, Corner tracing type: 10-25, 4 motors: 6,

Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

IRON ESY 18/10/50MS – Side Loader Forklift General data: Manufacturer: Iron Model: ESY 18/10/50MS Serial number: F58170 Year of manufacture: 1984 Operating hours: 3900 h Maximum lifting capacity: 2000 kg Maximum lifting height: 5000 mm Fork length: 1000 mm Weight: approx. 4500 kg Dimensions (L x W x H): approx. 2450 x 1800 x 2650 mm Description: Side loader forklift designed for handling long and bulky materials such as pipes, profiles, and timber. The machine allows lateral loading and transport, making it suitable for warehouses and industrial environments with limited space. Auction-ID: A7-45351-50

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Pallet forks suitable for Bobcat, Side curdles, Very good condition, Forks 1100mm long Auction-ID: A3-43506-37

2. Jointer & Planer Combination Capacity: 180x120 mm 2 sharpening blades – central lubrication – double clamping tools Soundproof housing, electromagnetic safety Motors: 4 kW planer / 2 5.5 kW routers / power supply Suction: Ø120/100 mm – Weight: 1200 kg – Dimensions: 3000 x 1000 x 1450 mm Auction-ID: A1-45443-62

- 4 trees - Capacity (mm) 240 mm x 120 mm - Input table dimension 2500 mm - Jointer: 5 kw - Right and left spinning top: 7.5 kw - Planer: 7.5 kw - Drive: 1.1kw - Input table dimension 2500 mm - Noise-canceling lips yes - Rack control - Speeds per drive - Up, down, digital planer shaft - Digital left top - SIKO mechanical digital counter with every axis movement and digital on the dashboard - Cutting tools Helical tool holders with carbide inserts - Suction diameter 4 of 120mm and 1 of 150mm - Dimensions 3900 mm x 1450 mm x 1540 mm - CE standard - Special data: Tabletop lubrication insert in the table // Jointer front drive roller with manual retracting // Polyurethane roller in the table at the outlet -motorized - Protector Yes - Amp Power: 55 Auction-ID: A1-45443-86

Machine: 4-sided WEINIG PROFIMAT 22 N Year: 1989 Max. working width: 220 mm Max. working height: 120 mm Length of table entry: 1950 mm Feed speeds: 4 - 22 m/min Tools: 4 sharpenable iron holders Axes: QTS digital adjustment Shafts: 6 units, Ø40 mm Motors: 4 kW degau, 2 x 5.5 kW routers, 5.5 kW planer, 4 kW lower motor, 5.5 kW universal shaft Equipment: central lubrication, lubrication crank, electromagnetic safety enclosure Auction-ID: A1-45443-14

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

Capacity: 230 × 120 mm Configuration : 5 shafts Jointer: 5 kW Right rotor: 7.5 kW Left rotor: 7.5 kW Planer: 7.5 kW Universal shaft: 5.5 kW Drive: 1.1 kW Speeds per inverter Digital up, down and planer shaft Digital left rotor SIKO mechanical digital counters on each axis movement + digital display on the board Helical tool holders with carbide inserts Tables: Inlet table 2,500 mm Suction: 4 × Ø 120 mm 1 × Ø 150 mm Machine dimensions: 3,900 × 1,450 × 1,540 mm Compliance: CE standard Special data: Integrated table lubrication insert Front drive roller jointer with manual retracting Motorized polyurethane roller at the outlet Safety: Protector: yes Auction-ID: A1-45443-72

- Number of trees: 5 - Max working width: 220 mm - Max working height: 120 mm - Length of the entrance table: 1950 mm - Shaft diameters: 40 mm - Jointing Motor: 4KW - Motor of both spinning tops: 5.5KW - Planer motor: 5.5KW - Universal shaft motor: 5.5KW - Throughput speed: 4-22 m/min - Tool holders with 4 sharpenable blades - Adjustment of the machine on a SIKO commeter - Centralized lubrication - Grease crank - Enclosure with electromagnetic safety Auction-ID: A1-45443-85

Capacity: 180 × 100 mm Configuration: 4 shafts Bottom with reference: 4 kW Right: 3 kW Left: 3 kW Top: 4 kW Electric raising and lowering 4 tool holders included Chain drive Jointing table 1.70 m Dimensions (estimate): approx. 2,900 × 1,600 × 1,600 mm (to be confirmed) Weight (estimate): approx. 1,750 kg (to be confirmed) Auction-ID: A1-45443-71

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

Kupfermuhle Vuin 770 2-sided planer – Features Max planing lg: 770 mm Max planing h: 200 mm – min: 3 mm Top cutting depth: 20 mm – less: 12 mm Ø top shaft : 2 x 140 mm Ø lower shaft : 1 x 140 mm P. Planer motors: 11 kW / 5.5 kW P. jointer: 5.5 kW Height adjustment: motorized Feed speeds: 7 / 9 / 12 / 14 / 18 / 24 m/min P. Advanced Engine: 4 kW Table entry reels: 3 Advance steel rollers: 5 Rubber Outlet Rollers: 2 Suction Ø: 3 x 180 mm Weight: 3,650 kg Dimensions: 2,200 x 2,200 mm – H: 2,000 mm Voltage: 380 V, 50 Hz, tri Auction-ID: A1-45443-83

Equipped with: 4,000 kg lifting capacity, LPG drive, lifting height approx. 5.0 m, own weight approx. 7,000–8,000 kg. Air conditioning. Auction-ID: A1-40133-68

Consists of: lifting mast 2500kg forklift, triplex three parts, freelift, side-shift, load capacity: 2500 kg, height: 186 cm, width mast: 60 cm, width board: 100 cm, length forks: 100 cm. Auction-ID: A1-40133-313

Equipped with: 5,000 kg lifting capacity at 600 mm load centre, equipped with Perkins engine (±57 kW), duplex mast, solid tyres, dead weight around 10,000–15,000 kg Auction-ID: A1-40133-174

Mateng Dynamic 220 – rear and side mulcher (new machine built in 2025) General data • Machine type: rear / side mulcher • Manufacturer: Mateng • Model: Dynamic 220 • Year of construction: 2025 • Working width: 2,200 mm • Weight: approx. 832 kg • Condition: New machine Technical equipment • Suitable for tractors of approx. 80–120 hp • Tilt angle: approx. -50° to +90° • Hydraulic side shift • Displacement: left 672 mm / right 1,528 mm • PTO: 540 rpm • CMR gearbox with freewheel • 4 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,047 rpm • Rotor Ø: 168 mm (with flail Ø 436 mm) • 24 mallets, staggered • Flail weight: approx. 1.37 kg • Hammer bolt M16 • Adjustable back-up roller Ø 168 mm • Two rows of counter blades for optimal shredding • Collision protection • Robust cons ...

Used machine - completely overhauled - ready to use, no costs to be expected! Martin - T90 Year: 2004 Features: Length of entrance table: 2m Folding exit table: 0.80m Working width: 260 x 160mm Shaft speeds: 6000 RPM Tree Shoes Tersa 56 Amps 6 Bar Machine dimensions: Weight: 2.5 tons Length: 4.20m Depth: 1.40m Height: 1.60m Auction-ID: A1-45486-3

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-40103-3

Dim. Loveseat approx. HxWxD 127x125x85 cm. v.v. surface-mounted module -- Dim. Side table approx. height 60 cm. and diameter 40 cm. Auction-ID: A1-44654-9

Equipment: 7601428 Brand: Bulmor Model: BMS40/14,5-12/82T Operating hours: 68 Year of construction: 2023 Mast: triple Height: 3,500 mm Nominal stroke: 8,200 mm Free lift: 2,760 mm Hydraulic actuation: Joystick Battery: Including load capacity: 4,000 kg, Condition: Paint damage Auction-ID: A7-45634-1

Dim. Loveseat approx. HxWxD 127x125x85 cm. v.v. surface-mounted module -- Dim. Side table approx. height 60 cm. and diameter 40 cm. Auction-ID: A1-44654-8

Dim. Sofa set approx. HxWxD 85x189x88 cm. -- Dim. HAY mint-colored side table approx. height 58 cm. and diameter 38 cm. Auction-ID: A1-44654-152

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Pallet gusseted bags type poly bags, 1 pallet = 24 cartons each 250 pieces = 6000 pieces transparent, size 750x400x630 mm 35 my Auction-ID: A7-45675-48

Auction-ID: A1-45188-195

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the saw for fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in  ...

Technical Specifications & Performance Data This used bottling line is an integrated SIDEL-based solution for PET still water, engineered for consistent throughput and high line efficiency in beverage production and industrial packaging environments. Nominal speed: 14,400 bottles/hour Bottle formats: 0.06 L, 0.50 L, 0.75 L Container type: PET (neck handling 25–30 mm) Product: Water (still) Core block: Sidel Combi 8-40-8 (SBO 8 blow molder + 40-valve filler + 8-head capper), year 2006 Secondary packaging: CERMEX tray packer for stable tray bundles (small and medium PET formats) Air & cooling: SIAD TEMPO 2 high-pressure compressor 1,500 m³/h; Baltimore Aircoil BAC F-100 evaporative cooling support Conveying: Sidel conveyors for balanced accumulation and smooth transfer Condition: Ready for operation with safety features included Manufacturers involved: Sidel, Cermex, SIAD, Baltimore  ...

Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow. Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 20 ...

Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line inclu ...

Used Sidel Aseptic filling line 48000 BPH - year 2020Technical Specifications & Performance DataThis used bottling line is a Sidel PET aseptic Blow–Fill–Cap combi configuration engineered for high-speed beverage production. Designed for dry aseptic applications, it delivers consistent performance for sensitive products while maintaining hygienic integrity throughout the process.Manufacturer: SidelLine type: PET aseptic Blow–Fill–Cap combiProduction speed: 48,000 bphCurrent product: PET bottled water, milkApplication: Dry aseptic; suitable for milk, juice and waterAvailable bottle volume: 230 ml (0.23 L)Main equipment year: 2020 (blowing, filling, bottle dryer, etc.)Blower model: Matrix XS P50 (SBO 22/28/26 Matrix XS P50)Filler/Combi model: FMa-COMBI CAPDIS-24kBottle dryer: 5 sets, includes conveyorSteam generator: Spirax Sarco, 200 kgAir compressor: AF L5S, 35 bar, 22 ...

Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACI ...

Used SIDEL Bottling Line for Still Water up to 54000 Bottles per Hour Introduction of the Used bottling Line SIDEL for still water up to 54000 bph The used SIDEL bottling line for still water up to 54000 bottles per hour is currently built in 2014 operational and offers high performance. Specifically designed to package still water in 0.5 liter PET bottles, this line meets the needs of large scale production. Moreover, the Sidel water line reaches a production speed of 54000 bottles per hour, thereby optimizing operational efficiency for high quality products. Filling Technology and Bottle Specifications This Sidel water line employs gravity filling technology with light depression, ensuring precise and consistent dosing of the product. Additionally, the bottle neck type is the standard 30. or 25, which is common in the bottling industry. Having operated for a total of 10000 hours, the l ...

Assen are dish 400x200 Battery faulty 4 new tires available Auction-ID: A3-43367-11432

Equipped with 12V solar panel with charge controller Safe IP housing for charge controller and Ajax Hub Detection range is between 3 and 15 meters including 1x Hub BP Jeweller, 1x Baseline StreetSiren white, 4x Baseline MotionCam outdoor (PoHD), 3x Battery 12V 17aH for in the base of the tower, 1x Battery 12V 7aH for the Hub BP, set of internal cabling including connectors and bracket, 1x Ajax SIM card permissions and access to the App for use Auction-ID: A1-40104-75

Vehicle data: Manufacturer: Combilift Type: C5000MK4/120/63TR Type: Four-way sideloader Drive type: Diesel Load capacity: 4400 kg Year of construction: 2024 Length: 2700 mm Overall width: 3100 mm Net weight: 6950 kg ISO class: ISO class 3 = 2,500 - 4,999 kg Mast data Mast Type: Triplex Lifting height: 6352 mm Overall height: 2967 mm Free Lift: 1996 mm Fork length: 1200 mm Fork width: 150 mm Fork thickness: 50 mm Fork carriage: 3100 mm Engine and Co. Drive: Kubota V2403TE Battery: 2024, 12V, 80 - 100% Description and equipment Front tyres: Superelastic Front tire size: 450x200 Front Tire Condition: 80 - 100% Rear tires: Superelastic Rear tire size: 720x295 Rear Tire Condition: 80 - 100% Tech. Condition: New Optical Condition: New Attachments: - Fork positioner Attachments: 3100 mm tine adjustment Special equipment: - 3rd valve - 4th valve - Re ...

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-40104-141

Equipped with 4 separately opening side doors and end door; lock case; maximum loading capacity 24 Tons; unused Auction-ID: A1-40104-140

The machine is currently still in production and will be professionally dismantled and prepared for transport in week 19. Due to the installation of the new machine, the planned date may still differ slightly. The loading (by buyer) of the machine will therefore take place in consultation. Auction-ID: A1-41992-1