side channel used for sale

Key data: 4

Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles

Turning- in machine for casemaking Schmedt Präkant HHS6F double action turning-in for cases up to 60x60 cm manual foot operated, so the timing of turning-in is decided by the operator

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Key data: 4 , 180 mm, 120 mm

Used machine Workpiece width 180mm Workpiece height 120mm 4 spindles: 1) Horizontal bottom 180mm 3.7kW 2) Vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kW Diameter of spindles 30mm

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Manufacturer: MEURER Type: CMK/M Angle welding machine + shrink tunnel Last used as a bundle packer for processed cheese (round cartons) El. Power: 8 kW Voltage: 380 V Condition: good, fully functional

Horizontal intermittent motion bagger for forming, filling and sealing duplex sachets. Mini maxi sachets: Width: 45 to 65 mm Height: 50 to 130 mm Capacity: 1.5 to 15 cm3 Volpak screw feeder: Type: DS-303 Year: 1997 Dosage volume: 1.5 to 15 cm3 Formats sold with the machine: 8 screws size 0 + 9 dosage cones 2 screws size 00 + 3 dosage cones 2 screws size 2 + 2 dosage cones 3 models of filling wand., formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303

Inv. Num. : 8894 Type: B24-TH300 DX/DW PU Producer: H&H Maschinenbau Created: 2020 Parameters: Weight: 498 kg Equipment: PUVS 280 P melting machine for 20 kg drums of PUR adhesive

Key data: 4 , 180 mm, 130 mm

Four-way planer Guilliet Type KXY Year of manufacture 1989 Planing width maximum 180 mm Planing height maximum 130 mm 4 planing shafts Knife length 186 mm and 136 mm Minimum planing 30 mm x 6 mm Dressing table length 2000 mm Feed speeds 6 and 12 m/min. Spindle diameter 30 mm Feed motor 0.55 kW Lower dressing shaft approx. 3.7 kW Right wave approx. 3.7 kW Left wave approx. 3.7 kW Above approx. 5.5 kW Height adjustment 0.18 kW Extraction connection diameter 160, 120 and 140 mm Including planer heads Dimensions 3200 mm x 1400 mm x height 1700 mm Weight 1200 kg The first picture shows identical machine in our warehouse

This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine.

This 4-axis HOMAG PROFI KFL20/29/QA/25 was manufactured in 2003. Ideal for efficient edge banding, this double-sided edgebander represents a robust solution for woodworking needs. Consider the opportunity to buy this HOMAG PROFI KFL20/29/QA/25 double sided edgebander. Contact us for more information.

This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.

Key data: 4 , 230 mm, 120 mm

Four-sided planer SCM Type COMPACT 23K Year of manufacture 1997 CE Working width 230 mm Working height 120 mm 4 planing shafts equipped with planing heads Spindle diameter 40 mm Feed rates 6/12 m/min. Spindle speed 6000 rpm. Clamping length vertical spindles 140 mm Clamping length horizontal spindles 253 mm Entrance table length 2000 mm Spindle arrangement Down / Right / Left / Up Planer heads with glazing bead separation Including Tersa planer cutter heads Motor strengths approx. Bottom 5.5 kW / Right and left together 7.5 kW / Bottom 5.5 kW Dimensions approx. 3300 mm x 1600 mm x H 1600 mm Weight approx. 1200 kg

This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine.

This HOMAG KF62/6/A/25 was manufactured in 1986. It includes an infeed roller conveyor and two double-sided edge banding machines, enhancing productivity with efficient transitions via rotary devices. Ideal for streamlined edge banding operations. Contact us for more information about this machine.

Equipment: Agitator,Manufacturer: RAUM Tankbau,Condition: used,Volume: 47,200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 5,000,Total height: 6,620,Wall thickness underbody: 4,Wall thickness upper floor: 4,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet: 65,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),Power: 3.5 / 12.5,Speed: 725 / 1465,Agitator: Propeller,Voltage: 400,Bottom Bearing: No,Current Interferer:

Equipment: Agitator,Manufacturer: Gebr. Hagemann Beckum,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 100,Lower shelf: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2.488,Cylindrical height: 5.350,Total height: 7.100,Wall thickness underbody: 5,Wall thickness cylinder: 6,Wall thickness upper floor: 5,Technical documents: Drawing,Manhole / dome: in cylinder, hand hole,Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN65,Note: slight adhesions,Last purpose: Chemical,Material in contact with the product: V2A 1.4301 (AISI304), Agitator:

Key data: 5 , 310 mm, 250 mm

Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space  ...

Wooden sliding door sideboard approx. 150b cm, small contents

Workshop side cabinet HAHN+KOLB approx. 60x80x70 cm, 1 door, 1 drawer

Desks and side tables light grey approx. 10 pcs., of which 3 pcs. each approx. 180x90 cm

Wooden sliding door sideboard, approx. 210x92x50 cm, small contents

Workshop side cabinet metal green approx. 80x85x5t cm, without contents

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Lower floor: flat bottom with slope,Design: upright,Standing shape: flat bottom,Insulation: available,Insulating sheath: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,500,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 80,Remarks: Container feet are spacers for the Substructure/foundation,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:

Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Volume: 50,000,Lower bottom: conical bottom,Design: standing,Stand shape: feet height-adjustable,Number of feet: 6,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,350,Cylindrical height: 5,500,Total height: 7,700,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: present,Last use: food, Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Agitator,Condition: used,Volume: 39,000,Design: upright,Standing shape: Feet height adjustable,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 4,750,Total height: 5,800,Manhole / dome: in the top floor,Type plate: No,Equipment: Ventilation/venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: 1 container without ventilation hood,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 5, Speed: 980,Agitator: Propeller,Voltage: 380,Bottom Bearing: No,Current Jammer: No,Agitator Arrangement: Laterally

SCM moulder model LOGIC 23 with 6 shafts: - useful working dimensions 230x120mm - cardan drive and pneumatic pressure - Forward speed 4 - 32 m/min with variable speed drive - upper feed unit before the 1st shaft - tandem feed unit in front of the 2nd shaft - 2500mm inlet floor - grooved plane from the 1st to the 5th shaft - Deck lubrication pump - shafts D=40mm at 6000rpm - maximum diameter of profile tools 200mm - complete with helical knife heads Trees: 1- below 2- right 3- Left 4- above 5- below 6- Universal Machine not compliant with CE regulations, for export

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planer heads rear left and right All planing shafts as 4-knife shaft Automatically adjustable table height with dressing table adjustable up to 12 mm Dressing table with table extension Feed rate 7-9-11,5 / 14-18-23 m/min. 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Min./max. thickness edge banding on roll: 0,4 - 3mm Min./max. thickness edge banding in strips: 5 mm Min./max. panel thickness: 8 - 50mm Min. panel length/width: 190/110mm Throughput speed: 9m/min Pre-milling unit: 2,2kW 7200 rpm Sprayers release agent Panel heating device Automatic laoding for edges Gluing unit: 0,18kW End-cutting unit with radius: 0,19kW Trimming unit: 2x 0,35kW, 12000rpm Rounding unit up to 3mm: 0,35kW Edge scraping unit Sprayers cleaning agent Glue scraping unit Brushing unit

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano

Side Pastry Filler / Berlin Filler with 1 Piston NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

Pressure total: 630 ton Stroke: 900 mm Daylight: 1550 mm Table surface area : 2500 x 1730 mm Slide area: 2500 x 1730 mm Die cushion capacity in table: 230 ton Die cushion stroke: 400 mm Die cushion pad area: 2150 x 1540 mm Approach speed: mm / sec Working speed: mm / sec Return speed: mm / sec Oil volume: 2000 l Required power: kW Weight of machine approx.: 200 ton

Side table wood, approx. 60x60x40cm (WxDxH), with table lamp

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton