shrink wrapping used for sale

Immersion shrink wrap tank Manufacturer: INELVI Model: TANKE RS 1600E Year of manufacture: 2005 Absorbed power: 36kW

Dont miss this exceptional opportunity! We offer for sale a Smipack machine in impeccable condition, with less than a month of use. This equipment is in perfect condition and is ready to be the ideal solution for your packaging needs. Featured Features: Impeccable Condition: The Smipack machine is in perfect condition, with less than a month of use. It is practically new and ready to be used immediately. Cutting-edge Technology: The Smipack brand is recognized for its quality and cutting-edge technology in the world of packaging. This machine offers exceptional performance and efficiency in the packaging process. Diversity of Applications: Ideal for a variety of applications, this Smipack machine is versatile and adapts to different types of products and packaging sizes. Whether for the food, pharmaceutical or any other sector, this machine adjusts to your needs. Up-to-date Main ...

PDC International 75M-Shrinksealer Tamper Evident Neck Bander/Sleever Sealer Machine. S/N-134. Year 1991. [Electrical: 1ph/120v/60hz/15amps]. [More Info: One (1) Used 1991 PDC International 75m Shrink sealer rated from 50 to 400 per minute depending upon band/sleeve dimensions. Band diameter range is from 10 to 90mm. Band height/length range is from 15 to 225mm. Includes vertical perforation, static eliminator, timing screw drive, motorized unwind reel, safety interlocks, bottle and sleeve material sensors and verification, Totally enclosed upper and lower safety cabinets. All stainless steel and anodized aluminum construction. Tool-less Changeover. Stack light tower for warning and alarm. currently set up with 60mm tooling. Sensors include: Upstream Photo Eyes, Material Out Sensor, Low Material Sensor w/Beacon and Film Feed Jam Sensor.

Shrink tunnel Pester type PewoTherm II, type 450N electronically / pneumatically controlled machine for thermal tightening of banding films band width: 450 mm band length: 1,400 mm tunnel passage height: 250 mm Operating manual in German language Manufacturer: Pester, Wolfertschwenden Machine no.: V-3214-5, year of construction: 1995 Electrical equipment: 220/400V, 3 Ph,6,5kW, 50 Hz Space requirement: 150 x 120 x 150 cm Collection desired

Model LT5040E, with ejection conveyor in sealing frame 500×400 sealing frame, variable speed conveyors, 25.4 pitch silicone-coated rods. Power supply: 380 volts three-phase+ground Installed power: 7 Kw Overhauled machine in good condition Optional equipment - 500 long tunnel exit conveyor with 20 diameter STAINLESS STEEL rollers . 250€ Price new: €9,950

Tray Shrink. It was used for Tetra Pak packages, bt can be used for any other products as well. Max. height 250 mm and max. width 560 mm

Entry level or backup machine for production of thermoshrinkable bags out of shrink tubing. Web width 500 mm. Seal types: straight bottom seal, side seal, round bottom seal. Machine is dismantled and moved to storage to make room.

Overview  The KV 600 HP on-line shrink packer was built in 2016 by the German manufacturer beck packautomaten. The machine is fully functional, in very good condition and was only in single-shift operation from July 2016 to October 2017. After that it was stored as a backup.  Technical details Output: 20 packs/minute Operating hours: 1,265 h The following items were packed: Beer cans in trays (L x W x H) 405 x 205 x 120 - 170 mm 405 x 280 x 120 - 170 mm, transported crosswise  Film quality Polyethylene shrink film (flat film), Monoaxially shrinking, thickness 30 - 50 μm Max. roll diameter: 250 mm Inner core diameter: 76 mm Welding width max. 600 mm Passage height 280 mm (The pack height depends on the type and format of the product, film quality and film thickness) Packaged goods height max. 170 mm Packaged goods length max. 450 mm Working height 880 mm +/- 50 mm Running direction of ...

Description: Consisting of approx. 36 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 70 kg

Shrink hood machine MSK / Germany Type Multitech 381+280S 60 pallets/h Euro pallets (1/2 Euro pallets possible) FILM AVAILABLE - PLEASE REQUEST Further documents and price on request

Description: Tool holder SK 40 Wendeschneidplatten für Fräserdurchmesser 3 bis 5/6 bis 12/14 bis 16/18 bis 20/25 bis 32 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 40 kg

Combi with 11.1.018 Foil cutting & Wrapping machine Serial Number: 4395905 Weight: 1,1 tons Power: 46 kVA Length mm: 3000 Width mm: 2300 Height mm: 1800 Working height: 85 cm. Transport size L x W x H: 3,0 x 2,3 x 1,8 Min.-max. glass thickness: max 350 mm Min.-max glass size: max 1500 width Electric. Connection: 125A Documentation: Present Instructions: Present Electric diagram: Present Parts list: None Photos/film available: Photos available

Overview The Dimac Star One P30 Tray/Shrink Packer was used in a Croatian brewery. As the bottling project is finished, the packer is for sale now. Last use was in December 2023  Tech. Details   Capacity: 30 cycles per minute  0,5l – 2,0l bottles  PET/Glass/Cans  Can work with Pad  Can work with transparent or printed film  Formats: 3 x 2 and 4 x 3

Description: Composed of: N°4 spools and various fiberglass. N°1 coil and various bags of heat shrink tubing. Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 15 kg

Overview   The fully automatic shrink hood applicator MSK381 was manufactured by the German OEM in 2019. It was used in a German mineral water company for the packaging of PET bottles in shrink trays on euro pallet and dd/half pallet. The machine is still in production and can be visited in operation.  Technical Details   Capacity  60 pallets / h (Euro)  92 pallets / h (DD)  Formats  Euro Pallet  DD Pallet  Scope of delivery  Control panel – HMI  Conveyors according to layout  Hood station   Shrinking frame with gas burners 

Soldi shrink wrapper, type: ET537, number: 3, 220 V, 14.4 A, plastic infeed belt, belt width: 220 mm, film width: 355 mm, clearance: 510 mm x 210 mm, seal length: 500 mm, total dimensions: 2400 mm x 1100 mm x 1700 mm.

Formats: PET bottles: 6 x 1,5 l; 6 x 0,7 l; 12 x 1 l; 6 x 0,5 l Glass bottles: 6 x 0,7 l Tray /cardboard + shrink foil Installed power: 65 KW Voltage: 400 V, 50 Hz Connection: 3f+N Nominal capacity: 40 packages/ min. Max. capacity at the format 6 x 0,7 l: 9300/h bottles Air: Operation pressure: 6 atmospheric pressure Consumption: mc./hr. 300 l/min. More then 300 machines new and second hand on our seema .de

automatic welding machine with welding tunnel - Kallfass 650 N - Bj1990 -incl. wiring diagrams

Manufacturer : CAM Model: AP Year : 2008 Type : Intermittent motion overwrapper Materials: Polipropilene, PVC, cellophane. Feeding: automatic or manual. Mechanical speed: 31 - 100 strokes / minute. Format : Length (A): 35 - 150 mm Height (B): 15 - 80 mm Width (C): 60 - 300 mm Chuck: ? 70 - 76 mm Roll: max. ? 320 mm Width: 100 - 400 mm

Used Shrink Wrapper Krones Variopac FS70 Capacity 70 pulse min 4 200 pulse hour Package predisposed 0 5 lt PET 3 8 Package predisposed 0 5 lt PET 4 6 Package predisposed 0 5 lt PET x24 Tray predisposed but without tray storage Machine include divider unit wrapping machine and tray applicator oven with cooler fans Machine is in very good conditions packed ready for delivery [...for more information send your inquiry to the seller.] refno: FA29

Used Shrink Wrapper Dimac Star F45 PACKAGING MACHINE Constructeur DIMAC Model Star F45 n A40 1462 Year of construction 2004 Parcel speed per minute max 45 Type of film 40 or 50 microns film Tray presence no Type de fonctionnement Possibility of imprimed film travailler Machine inlet type right or 90 right Divider bottles yes Hours worked 16452 12 07 Last revision Spare parts yes PLC manufacturer and model B R Voltage 400 V 50 Hz Manuals available all Security protections yes Machines still in operation yes Availability November 2017 Currently processed formats 1 5l x 6 1l x 6 0 5l x 6 Dimensions encombrement machine 11 m x 1 35 m [...for more information send your inquiry to the seller.] refno: FA23

vacuum shrink packer More then 300 machines new and second hand on our seema .de

1 of used film-only shrinkpacker, make KHS, type SP A-H (Advanced, High-speed), new 2011, operating side: left. Controls: Siemens/Rexroth. Last used to pack multiple diameters/heights of round and rectangular PET bottles in various configurations 1/2/3 lanes, at a maximum speed of 90 cycles/minute (limited by filler speed). In excellent condition.

Description: Half tube: 7x width: 250/250 mm, thickness: 70 my, length: 800 m , 1x width: 250/250 mm, thickness: 70 my, length: approx. 600 m Perforated half tube: 1x width: 400/400 mm, thickness: 40 my, length: 500 m 1x width: 260/260 mm, thickness: unknown, length: approx. 200 m 1x width: 260/260 mm, thickness: unknown, length: approx. 100 m 1x width: 260/260 mm, thickness: unknown, length: approx. 50 m Hose: 1x width: 360/360 mm, thickness: unknown, length: approx. 700 m Approx. Onsite Dimension. (l x w x h): 1,200 x 1,800 x 1,500 mm, weight approx.: 500 kg

General SKU367T1099 LocationBarneveld MakeRobopac TypeEcoplat FRD No.KN /114967 Year of construction2012 Main Features MaterialStainless steel Motor0.9 KW Specified Features - Miscellaneous MaterialStainless steel Motor0,9 kW Information Total height2,8 m Weight345 kg CEcheck Floor space1,65x2,6 m Extra SpecificationsRotation speed table: 4-10 rpm 2400 mm wys 1600 mm MiscellaneousRobopacMiscellaneous > MiscellaneousBrand > Robopac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

Its welding/shrinking combinations are ideal for medium production quantities (max. 200 - 500 packages per hour). The machines operate with a shrink hood instead of a tunnel. The hood is closed by a locking electromagnet during film welding and heat shrink wrapping operations. Almost all products can be shrink wrapped with this intelligent machine. AUDIONPACK machines have, thanks to precise temperature control, better weld quality and longer wire life than most similar machines in this market segment. Simultaneous welding and heat-shrinking of the film under a transparent hood Magnetic locking device: automatic reopening of the hood Automatic ejection of the product by motorized belt Adjustable welding temperature; microprocessor controlled automatic weld timer (to prevent overheating) Cooled by liquid cooling system PTFE coated welding knife Adjustable film perforation unit ...

SITMA C 740 LT shrink wrapping / wrapping machine with shrink furnace The machine is used, in good condition, complete and operational. She worked the number of hours shown on the clock in the photo below. Producer: SITMA Type: 740 LT Serial number: 118 Year: 1999 Consists of the Heat shrinkable wrapper SITMA 740 LT Feeding belt Shrink oven with integrated cooling The SITMA 740 LT pressure rollers are designed as a universal machine for all types of packaging. With this machine, it is possible to pack staples for magazines, newspapers and other products of various heights up to a total height of approx. 5.5 thousand. 350 mm. It is possible to seal all 4 sides up to a staple height of approx. 100 mm. Top height products will be spotted automatically and single stripe only (no side welding). Perfectly matched products: Packaging for newspape ...

MSK Used Pallet Wrapper 2015 The MSK pallet wrapper machine model 2801 manufactured by MSK Convertech in 2015 is available in excellent condition It comes complete with safety guards and manuals making it an ideal choice for covering and shrink wrapping plastic film over pallets filled with products In addition you can take advantage of an extra benefit 134 additional rolls of 6 mil LLDPE are available for optimal packaging of your products Not only will you get a reliable packaging solution but you ll also have the peace of mind of having spare parts available for any future needs Rely on the quality of the MSK machine to achieve precise and efficient coverage and shrink wrapping for your pallets Choose the machine that offers safety reliability and excellent condition Contact us today for more information on this stand alone MSK shrink wrap machine and to discuss your specific shrink w ...

DESCRIPTION Beck Packers Series Packer S1750 X Fully automatic film packaging machine for four-sided product shrink-wrapping Fully automatic, belt feeding with light barrier control Functioning: The beck series packer works fully automatically with photoelectric product scanning. The goods to be packed are introduced by means of a conveyor belt into the cross weld seam and Shrink-wrapped there in cycles on 4 sides. The film rolls are mounted above and below the conveyor belt. For the production of skin-tight shrink packs, the packaging machine can be equipped with the proven energy saving beck thermal shrink can be extended to a complete film packaging line. Specifications: Standard operating page: right Welding punch width: 550 mm Punch closure: servo-motor Welding system: permanently heated Passage height: 100 mm Belt width inlet: 140mm Belt width spout: 1 ...

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

Angular shrink wrapping machine ULMA MOD SLAU50, with shrink tunnel, for different products

Automatic complete machine with shrink wrapping tunnel Automatic machine for packaging in thermal foil. It closes the package on 4 sides. The machine is operational, works in continuous mode. The input tray picks up and advances the item into the sealing chamber. It seals the film, cuts it off, removes excess film with the use of a side system for collecting waste. Then the internal feeder moves the item into the heating tunnel to shrink the film. Machine Parameters: - FAI PACK CS9700 packaging machine - FAI PACK FR30FT heating tunnel - Dimensions of packed items - knife length (930mm) package up to 650mm - width up to 500 mm - height up to 250-280 mm - Year of manufacture 2000

Used filling and packaging line for delicatessen products, In use for mayonnaise, 500 g - jars,, Output: up to a maximum of 170 glasses/minute, consisting of:, OSMEKA - empty glass - depalletizing, pit design, year 2004, Output: 2 layers / minute,, buffer table with separation,, Turning and blowing machine, make Engler, year 2001, Output: max. 170 glasses/min,, Piston filling machine, make Engler, year 1998, Output: up to max. 200 glasses/min,, SAFELINE (METTLER TOLEDO99 metal detector, Drying tunnel, make ACI, Dri-Line Series, CLEVER sleever + shrink tunnel, LANGGUTH labeling machine, type E212/R-235, year 2000, Output: up to max. 170 glasses/min,, MR labeling technology, seal labelling, year 1998, Output: up to max. 200 glasses/min,, MEYPACK tray packer, year 1996, with foil wrapping machine + shrink tunnel, Output: 14,400 glasses / h - 20 cycles per minute

Semi-new automatic cellophane wrapping machine with double sealing mass and 6 station feeder. Can be used for non-shrink cellophane wrapping.

Clocking film packaging machine, Beck with additional printer – used- : Price from location: 35.000.-€ (net)! Manufacturer: Beck Packautomaten Type: Serial packer SX / S 1115X Year of construction: 2011 Machine number: 1111 0215 Conveyor belt: Type: B 200/9,2, no.: 1111 4568, AB C514 Weaver Model 2050 CC Type: 20 – LH – CL412NX S/N 50018630 Year of construction: 2017 Sato Barcode Printer Model CL4NX Original price: approx. 100.000.-€ Condition: good Available: now Location: Wenkbach Information according to manufacturer: This fully automatic film packaging machine works according to the special beck series packer principle with 2 rolls of flat film for 4-sided product shrink-wrapping. The serial packer principle ensures a permanently guided and controlled product and film run for the production of tight, shapely packages with fine weld seams. The f ...

italdibipack automatic packaging machine automatic shrink wrapping machine on sale due to lack of use and little use fully functional

Filling line for PET, HDPE bottles (Bulgaria) - volume of bottles 0.5; 1.0l, productivity 6000 bph. The line consists of Rinser mod. IND-Wash 55-32 RR for rinsing bottles with ozonized water, capacity 6000 bph. Grabbing by the throat. Filling monoblock model IND-DOSE 49 RWTC-20/6 capacity 6000 bph with built-in CIP internal washing (additional two-section bath for directing solutions and circulation along the internal circuit of the machine), external manual washing. Dosing type is weight. UV lamp for screw cap processing. Shrink wrapping machine with buncher and flow divider, model IND-Pack, blocks 2 3, 3 4. Film width 490mm. Thickness 80 microns. Transport system model IND Trans 71 (13m) Ozone station made of stainless steel Labeling machine for circular polypropylene labels model IND-GM 360 Dismantled in 2021. In working condition.

As good as new machine with very few operating hours (built in 2020). This like-new, very powerful, fully automatic shrink wrapping machine works with a permanently heated longitudinal and a cycled transverse welding, which offers at least 3 undeniable advantages: • No length limit of the product to be packaged • Significant increase in production capacity • Cost savings due to less film waste • Machine dimensions: 2180 x 1545 x 1525-1655 mm • Dimensions welded frame: 500 mm/length unlimited • Max. product height: 200 mm • Max. film roll width: 600 mm • Max. ø film roll: 350 mm • Production capacity: 600-4200 per hour (depending on product size and material) • Belt speed: 10-30 m/min • Power rating: 380-415V /3ph/ 50/60Hz • Consumption: 2300W • Continuous longitudinal seam with permanently heated transverse welding • Welding beam for longit ...

Automatic shrink wrapping machine Automatic machine for packaging and shrinking with heat-shrinkable foil for elements within the film/sleeve/400-400 mm dimension. The line includes a feeding conveyor, a packing machine, an intermediate conveyor, a sealing device and a receiving conveyor. The welding speed and temperature are set manually depending on the film thickness.

The machine includes: o Foil module o Control of the printed film o Tunnel by 2 transport modules o Stacker o Longitudinal ionization system for shrink wrapping o Longitudinal seal system for packing in loose foil Machine after general reconditioning, purchased in 2003 from the manufacturer. Adapted to connect two M111 feeders (multifeeder) TECHNICAL PARAMETERS: Packing range: 1. Package type: Closed with a fold on the top side of the package 2. Min / Max length: 150-420mm 3. Min / Max width: 100-330mm 4. Min / Max height: 1-40mm 5. Min / Max package weight: 10-2500 g 6. Max capacity: 11,000 / h Foil: 1. Type: PE-PVC-PPO 2. Min / max thickness: 13-50 µ 3. Min / Max width: 250-750 mm 4. Number of turns: 1 pc. 5. Max coil diameter: 600 mm 6. Width of the welding machine: 320 mm Machine dimensions: 1. Length: 3260 mm 2. Width: 2100 mm 3. Height: 1700 + ...

R23536/12 ELSNER Roller cutter "Semi Auto Rewinder" Model: MSR - 42 Built: 2004 Working width: 100 cm for secare rolls , gift wrapping paper Rolling diameter: 1000 mm Roll-up diameter: 305 mm Material: from light-weight tissue to heavy kraft paper, e.g. flower foil PP etc., newsprint, nonwoven... pneumatic crushing knives on cutting shaft Shaft for 70 he sleeve Automatic shut-off Available: immediately

Capacity/h: 6000 P/h Condition: excellent, ready for operation Tetra Pak TBA 8 1000 ml Slim Line Filling Machine with Screw Cap Applicator TCAP 47 consists of: TBA 8 1000 ml Slim Line Filling Machine V100, Pull Tab Applicator PT 8, Tetra Cap Screw Cap Applicator TCAP 47. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 Slim Line 1000 ml Filling Machine with ReCap 2 consists of: TBA 8 1000 ml Slim Line Filling Machine, Pull Tab Applicator PT 10, Tetra Cap Screw Cap Applicator ReCap 2 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).

Condition: excellent, ready for operation Tetra Pak TBA 8 1000 sl consists of:Tetra Pak TBA 8 1000 sl with Pull Tap PT 10, TCAP 21 ReCap 3 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 and TCAP 47 consists of: Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 Ascrew cap Applicator TCAP 47, Packer TCBP 70 and Conveyors. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.