129,242 used machines on RESALE, but how to find them? Machine Search
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XL version for large products, inclusive suitable shrink tunnel. Suitable for dust protection and transport purposes. Low cost packaging solution even for large products of up to W+H
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): max. speed of the machine in neutral: 10cycles/min | max. product dimensions LxWxH: 1500x1300x600mm | length of sealing blade: 1800mm | chamber dimensions LxBxH: 2000x1800x800mm | conveyer height: 850mm+/-50mm | power: 380V, max. 63kW | compressed air: approx. 6-8bar | machine dimensions and weight: sleeve packer L2418xW2100xH2132mm, 1300kg, shrink tunnel: L3000xW2200xH2090mm, 1600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx ...
High speed SLEEVEshrink machine for multipacks, also suitable for printed film. For round and quadrate containers (bottles, cans, glases). Special film guidance from one roll only. Continuous and smooth film transport. Complete System including shrink tunnel. While moving the products forward the formation of the products is configurated. ? Specifications: Packaging formations: 2x3, 3x4, 3x5, 4x5, 4x6 (depending on product / max. multipack size ca. L500xW600xH350 mm) | max. speed of the machine in neutral: 35 cycles/minute | servo motor control system and 10 LCD Color Operating Touchscreen | strength of film: 60-120?m | film width: up to 600mm | film diameter: 450mm | suitable film type: PE-film | chamber size shrink tunnel: L3000xW700xH450mm | shrinking temperature: 200-280?C | power: 380V, 65kW | compressed air: 1.0m?, 6bar | total dimensions: L15000xW1530xH2500mm (incl. conveyor belts ...
Sleeve packer/film band roller for film wrapping of large products. Including shrinking tunnel. Full automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications: 380V, 21kW | 0.6m?, 6.0bar | max. speed of the machine in neutral: 10 cycles/min | max. product dimensions (mm): W750xH300 | machine dimensions (mm): L5060xW1150xH2000 | weight (net/gross): 1200/1400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Automatic side sealing machine for shrinkwrapping packaging. Suitable for very large/wide products. Ideal to be combined with SHRINKtunnel-POF-Xtra Wide. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions: unlimited length, W+H
Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm, ...
Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm | max. length of sealing blades: horizontal ...
Fully automatic L-sealer, PRO version, for shrink wrapping packaging. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 6Bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L(100-450)xW(60-350)xH(5-120) | machine dimensions (mm): L1790xW845xH1550 | weight (net/gross): 350/450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-M (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Slide conveyor (kissing table) to allow product length of less than 50mm. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | packing sizes: L(30-400)xW(40-280)xH(2-80), W+H
PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Slide conveyor (kissing table) to allow product length of less than 50mm. Optional available: infeed systems for CD, DVD, etc. - Specifications: 40 cycles/minute | packing sizes: L(60-560)xW(60-430)xH(10-180), W+H
PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 40 cycles/minute | packing sizes: L(200-830)xW(200-630)xH(10-180), W+H
PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XXL (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 40 cycles/minute | packing sizes: L(200-830)xW(200-630)xH(10-300), W+H
Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | max. product dimensions: unlimited length, 300mm width, 150mm height | weight (net/gross): 400/500kg | power: 220V, 2kW | air: 5.5 bar/0.1m?/min | L1680xW960xH1500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic L-sealer for shrink wrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 5.5 bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L450xW350xH130 | machine dimensions (mm): L1700xW960xH1400 | weight (net/gross): 290/420kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
M-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-M (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) = 500mm provided that H < 180mm and (W + H) = 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm, vertical = 550mm | power: 220V/2.8kW | machine dimensions: L1850xW1350xH1300mm | weight: 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - U ...
L-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute | packing sizes: (L + H) = 600mm provided that H < 180mm and (W + H) = 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm, vertical = 550mm | power: 220V/3.2kW | machine dimensions: L2015xW1470xH1300mm | weight: 850kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...
XL-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute | packing sizes: (L + H) = 800mm provided that H < 180mm and (W + H) = 650mm provided that H < 180mm | length of sealing blades: horizontal = 903mm, vertical = 750mm | power: 220V/3.5kW | machine dimensions: L2430xW1550xH1300mm | weight: 930kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging ta ...
Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm, ...
L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For larger sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXL PRO-Version - Technical specifications: 220V, 7kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-850)xW(100-650)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L2410xW1095xH1515 | weight (net/gross): 200-250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automati ...
L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XTRA (for very large/wide products). - Technical specifications: 220V, 4.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1150xW870xH350 (sealing blade length: L1200xW900mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L2840xW1560xH1310mm | weight (net/gross): 350/400kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging t ...
L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXTRA (for very large/wide products). - Technical specifications: 380V, 5.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1750xW960xH280 (sealing blade length: L1850xW1050mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L3640xW1715xH1510mm | weight (net/gross): 450/550kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging ...
L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For middle sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-L PRO-Version - Technical specifications: 220V, 4kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-500)xW(100-400)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1765xW810xH975 | weight (net/gross): 150-200kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic ma ...
Economical L-Sealer for wrapping large sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.5kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L750xW600xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1800xW855xH1100 | weight (net/gross): 135/185kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...
L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW | compressed air: 5.5bar, 0.1m? | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L900xW600xH300 (can be varied on demand) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions depending on actual packaging size required | weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the ...
Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L450xW400xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1560xW760xH1040 | weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...
Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker). Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.0kW | compressed air not necessary | max. speed of the machine in neutral: 8 cycles/minute | max. product dimensions (mm): L450xW300xH200 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1380xW690xH1065 | weight (net/gross): 125/175kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...
Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker) with roller conveyor for product out feed. Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.2kW | compressed air not necessary | max. speed of the machine in neutral: 17 cycles/minute | max. product dimensions (mm): L450xW300xH200 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1400xW870xH1080 | weight (net/gross): 150/220kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and add ...
Label shrink tunnel for shrinking labels on bottles, cans or jars. Version without conveyor belt and with removable frame. The chamber can be installed on existing conveyor belts, allowing the shrink tunnel to be optimally integrated into your packaging line. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: ? 140xH350mm | tunnel size: L1600xW150xH400mm | max. output: 200 containers/minute | power: 380V, 14kW | machine dimensions: L1600xW1005xH2100mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All m ...
LABELshrink tunnel. Fully automatic version with circle conveyor for smoothly shrinked full labels on bottles/cans/glasses without any corrugation. Air blow controllable by sections. - Specifications: max. product size: ? 200xH300mm | tunnel size: L3000xW250xH350mm | machine dimensions: L5600xW680xH1770mm | output: up to 200 bottles/min | power: 380V, 32kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Shrink tunnel for shrinking labels onto bottles, jars, containers. Evenly shrinking of the labels without wrinkling due to the steam process. ? Specifications tunnel: max. product size: ? 100xH220mm | max. Output: 166 container/minute | compressed air: 1bar | power: 220V, 900W | machine dimensions: L2450?W500?H1600mm | weight: 120kg. ? Specifications steam generator: capacity and steam output: 27l, max. 34,4kg/h | steam temperature: 170?C | max. 24kW | compressed air: 7bar | power: 380V | dimensions: 660x420x1230mm | weight: 120kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machine ...
Label shrink tunnel for shrinking labels on bottles, cans or jars. Version without conveyor belt and with removable frame. The chamber can be installed on existing conveyor belts, allowing the shrink tunnel to be optimally integrated into your packaging line. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: ? 110xH250mm | tunnel size: L1500xW120xH300mm | max. output: 200 containers/minute | power: 380V, 14kW | machine dimensions: L1500xW1005xH2100mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All m ...
Label shrink tunnel for shrinking labels on bottles, cans or jars. Basic version with conveyor belt. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: ? 140xH350mm | tunnel size: L1600xW150xH400mm | max. output: 200 containers/minute | power: 380V, 14kW | machine dimensions: L1900xW600xH1665mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
LABELshrink tunnel. Basic version with conveyor for smoothly shrinked labels on caps only. For bottles/cans/glasses without any corrugation. Two blowing motors for low and turbo air blowing. - Specificationen: max. product size: ? 120xH400mm | tunnel size: L1000xW150xH400mm | machine dimensions: L1530xW400xH1300mm | output: up to 200 bottles/min | power: 380V, 9.0kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
LABELshrink tunnel. Basic version with conveyor for smoothly shrinked full labels on bottles/cans/glasses without any corrugation. Air blow controllable by sections. - Specificationen: max. product size: ? 100xH280mm | tunnel size: L1500xW120xH300mm | machine dimensions: L1800xW600xH1550mm | output: up to 200 bottles/min | power: 380V, 9kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Label shrink tunnel for shrinking labels on bottles, cans or jars. Basic version with conveyor belt. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: ? 110xH250mm | tunnel size: L1500xW120xH300mm | max. output: 200 containers/minute | power: 380V, 14kW | machine dimensions: L1800xW600xH1665mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (NORDSON glue system) and add a tray underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100?m and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm | max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: L10070xW1650xH2485mm | weight: 5600kg | power: 380V, 13kW (machine) and 380V, 63.75kW (shr ...
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min | max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm) | film width: max. 1600mm | length of sealing blade: 700mm | operating temperature: up to 200?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 1.8kW | compressed air: approx. 6-8bar | machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm | operating temperature: up to 400?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 20kW | chamber dimensions: LxBxH: 1500x600x4 ...
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW | ca. 6bar | max. speed of the machine in neutral: 8 cycles/min | max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600) | machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000) | weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW | max. product dimensions (mm): L1000xW230xH230 | sealing blade length: 1500mm | machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW | machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Wraps A700S Shrink sleeve wrapper A700S shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph
Stock number: F527, Shrinking tunnel, Floddab type K-52., TRM 70., 12 kW heating., Max. packing size: H 400 x W 550 mm., Machine size: L 1850 x W 850 mm., Item: Max H 400 x W 550 mm.
Sealing frame X/Y: 520mm/380mm, max. product dimensions X/Y/Z: 500mm/380mm/250mm, max. packaging capacity: 300 pieces/h, table height: 925mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1350mm, weight: approx. 150kg. On-site inspection is possible.
Tightening Banding Machine for Shrink Film
Used Shrink Tunnel ULMA, Type: HRX-400 - With output tape - The speed adjustment knob is missing - The temperature control indicator/switch has been replaced. Programming still has to be done, because error is displayed - The heating elements work well and reach the target temperature -El. Connection: 380 V, 50 Hz, 16 kW, 28 A Visits and test runs are possible by arrangement.
Twinpack automatic handle applicator model MGE Manufacturing year 2010 Setting handles on shrinked bottles packs Capacity up to 50 packs per minute Siemens S7 machine drive CE control panel Machine in very good condition Recently dismantled and now stored dry and clean in warehouse Available immediately
Height=1.33 m, Overall length= 0.8 m, Overall width= 0.73 m, Net weight= 120 kg,
used
1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: left. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).
1 fully automatic film multi-shrink system for 0.2 l Tetra packages a.) With 2 identical Meurer films single packaging- shrink-wrapping systems. Shrivelled 200 ml packages are divided into 5 or 2 x 5-sticks from the Meurer Karton Manufacturing and packaging system and divided into 10 or 20 individual packaging. Manufacturer: Meurer Type: CM/BK 45 T80 Machine No. 861.5005.0199 Year of construction 2006 Without connecting transport railways for single and multi-packaging b.) 1 fully automatic film multi-shrink system Manufacturer: Meurer Type: CM/BK 40 T80 Machine No. 861.004.0199 Built in 1999 Length of the machine: 5.40 m, width 1.75 m, Height: 32 cm
maximum number of results exceeded
please refine your search
