shrink tunnel used for sale

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - .ucymachines/

Description Item # 8974 – GUM/ CANDY EXTRUDER and COOLING TUNNEL Last used for gum (to be made into chiclets) Including : CARUGIL STR-300D Extruder - Twin Head Extruder 8kW, 380Volts With Inclined Belt feeding into an EXECUTIVE Cooling Tunnel Type 1240301 400Volts, 50Hz With SIEMENS PLC Controls Including 2 x Freon R407C Compressors

Description Item # 8977 – GUM COOLING TUNNEL Manufactured by TOGUM Model TOK-220 3 x 380Volts, 50hz, 20kW

Description Item # 8979 - GUM/ CANDY EXTRUDER & COOLING TUNNEL Manufactured by WLS Type KML Single Rope Feeding into a TOGUM Cooling Tunnel Model TOK 350-7-6 380Volts, 50Hz This was working with item #8680 candy cut and wrap

Description COOLING TUNNEL With SEWTEC AUTOMATION Wafer Bar Feeding Station, Conveyor through to a 1000mms wide SOLLICH Cooling Tunnel, about 30metres long. (Previously Used for wafer bars after caramel and chocolate coating, enrobers not included)

Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details Year of manufacture: 2023 Output: 35,000 cans/h Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm Treatment surface: 9 m², single deck, 1 module Treatment time: min. 4.5 minutes Product temperature: 5 °C inlet, 25 °C outlet Spray water temperature: 40 °C Steam consumption: ...

Control container, control cabinet -Control cabinet for tunnel boring -comes from the company Lemme Berlin -for bentonite pumps -Control panel -PLC control -Dimensions: 600/350/H1320 mm -Weight: 60 kg

Rutland Sanitiser tunnel Stainless frame, overall length 3000mm, belt width 370mm, max product height 500mm, variable speed, 3Ph

FTNON Sanitiser tunnel Serial: 330188 Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph

SSW Sanitise Sanitiser tunnel Stainless, variable speed conveyor, belt dimensions 2000mm x 380mm, recirculation pump, max product height 450mm, with roller conveyor outfeed, 1Ph

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

Curing tunnel, 20 cm width 6-unit press, 500 x 500, 6 stations Double-deck press

Belt width: 710 mm, Length: 16000 mm, Refrigerant: N2 (liquid nitrogen), Power: 3 x 400 x 50Hz, 8kW, Dimensions: 17600 x 1500 x 2300 mm

Icon Engineering Steriliser tunnel Stainless, cold water steriliser tunnel, stainless chain belt, belt dimensions 1800mm x 360mm, max product height 250mm, variable speed, with recirculation pump, air knife, 3Ph

1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt

1 used shrink tunnel, made ZVT (now KHS), type ST/II-600DG. Built in 1995. With belt braiding tape (for untabivalent products such as PET bottles). Total length 6,000 mm. Passage 570 mm High x 400 mm wide. E-connection 415V (x5%) / 50 Hz. Top condition (belt recently renewed!). Operator side: right or left. (2 machines available).

AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H

stainless heat shrink tunnel, adjustable temp, aperture 400mm W x 250mm H,

Shrink tunnel with Folienverschweisung 18 Tackte / min

Rochman Stainless shrink tunnel Model: TRX65 Serial: 2511004 Stainless shrink tunnel, stainless mesh belt, belt dimensions 1800mm x 650mm, max product height 400mm, variable speed, variable temperature, 3Ph

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs

Used tunnel with bulk wrapping machine and wrapper in shrink wrap.

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

HugoBeck films packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items have been packed: Item size: 150 x 80 x 240mm – these in one pack 4 rows x 9 individual bottles with the dimension 730 x 600 x 245mm HugoBeck automatic film packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items were packet: Item size: 150 x 80 x 240mm - these in a pack of 4 rows x 9 individual bottles with the dimensions 730 x 600 x 245mm Envasadora automática de film HugoBeck con túnel retráctil - Año de construcción 2015 - Aprox.81.000 horas de funcionamiento (total) - Los siguientes artículos fueron embalados: Tamaño del artículo: 150 x 80 x 240mm - estos en un paquete de 4 filas x 9 botellas individuales con las dimensiones 730 x 600 x 245mm

REF-827 SLEEVE WRAPPER AND SHRINK WRAPPING MACHINE MEURER CM SB60-B The Meurer CM/SB-B sleeve wrapping machine produces sleeve-wrapped packages, with or without lateral shrink wrapping. The film is stretched lengthwise, for which reason it fits any product to perfection. Manufacturer: Meurer Model: CM/SB60-B Year: 2010 Product dimensions min/max: Length 40-400mm; width 50-600mm; height: 40-350mm Sealing jaw width: 600mm Film reel diameter: 400mm Overall dimensions: Length 1,520mm; width 1,430mm; height 2,090-2,140mm. Performance: up to 50 cycles/min depending on product and film specifications 400/230V + N + PE. Power: 3kW (without side shrinking), 11kW (with side shrinking unit) Air connection: 6 Bar, 1/2" Sealing system: permanently heated sealing tool with sealing blade and electronic temperature control. Easy access due to an open construction. Quick, tool-less ...

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995

1 BECK shrink tunnel type HV601, working width 60 cm, year 1999

Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

Very well maintained shrink tunnel , 400 V, 13 KW

Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Manufacturer: BECK Machine type: Shrink Tunnel

Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.

Robopac Ariane 6050/2TA Lsealer shrink tunnel Serial: KN055476 L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph

Combi with 11.1.018 Foil cutting & Wrapping machine Serial Number: 4395905 Weight: 1,1 tons Power: 46 kVA Length mm: 3000 Width mm: 2300 Height mm: 1800 Working height: 85 cm. Transport size L x W x H: 3,0 x 2,3 x 1,8 Min.-max. glass thickness: max 350 mm Min.-max glass size: max 1500 width Electric. Connection: 125A Documentation: Present Instructions: Present Electric diagram: Present Parts list: None Photos/film available: Photos available

Cryovac shrink tunnel, model: ST 85 LHS, serial number: A51700807, year of construction: 2006, 380/415 V, 50 Hz, 16 A, 4 kW, plastic rollers, roller width: 850 mm, total dimensions: 1650 mm x 1750 mm x 2400 mm.

6-sided packaging machine from the manufacturer Mac Due, model: Maxi 120/A and integrated shrink tunnel T.150-80 R. suitable for dimensions: 1000 x 1700 x 500 mm. Dimensions complete system: 11245 x 2170 x 2460 mm incl. extensive documentation Viewings possible at any time by arrangement.

Adpak Uniblock 712AD Shrinkwrapper and heat tunnel Automatic shrinkwrapper and heat tunnel, sealing bar 750mm, with hold down, tunnel aperture 600mm x 450mm, mobile, 3Ph

Power supply : 380V, 50Hz Rated power : 7,200 W Heating temperature adjustable Maximum product height : 230 mm Maximum product width : 400 mm Belt speed : 3 - 18 m-min. eisnstellbar Dimensions approx. L x W x H : 1,400 x 850 x 1,500 mm

Sell some of our machines from our warehouse

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20XXL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 30kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W700xH300 | machine dimensions (mm): L2100xW950xH1315 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W15 4XL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 24kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W940xH250 | machine dimensions (mm): L2800xW1460xH1280 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40M (vertical) PRO-version, AMTEC Shrink Wrapper FLOWshrink W100-L High speed PRO-Version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW300xH230mm | tunnel size: L1200xW350xH380mm | machine dimensions: L2200xW900xH1160mm | power consumption: 380V, 14kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sampl ...

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40L (vertical) PRO-version and AMTEC Shrink Wrapper SIDEshrink W60XL PRO-version. Conveyor speed: 0-30m/min. Adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L(unlimited)xW400xH300mm | tunnel size: L1700xW450xH350mm | machine dimensions: L2200xW1000xH1330mm | power consumption: 380V, 16kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. ...

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XL (vertical) PRO-version and AMTEC Shrink wrapper SIDEshrink W60XXL PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended also for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW700xH300mm | tunnel size: L1700xW790xH350mm | machine dimensions: L2200xW1400xH1230mm | power consumption: 380V, 21kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample ...

PRO-version shrink tunnel to heat shrink very large products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XXL (vertical) PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW800xH300mm | tunnel size: L2400xW850xH400mm | machine dimensions: L2400xW1320xH1750mm | power consumption: 380V, 24kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are availabl ...