128,748 used machines on RESALE, but how to find them? Machine Search
Gear slotting 5140, Russia production, with change gears
workpiece length ... 3050mm max. šWorkpiece width ... 1525mm sheet thickness ... 19mm Laser power... 2500W Axis Z ... 300mm Axis A ... 360° Axis B ... 1.5M Axis C ... 360° Control Mazatrol L x W x H ... 9800x5000x2300mm Machine weight ... 14500kg The machine is in good condition, possible to test under power.
Marble plate Length: 1045 mm Width: 510 mm Thickness: 110 mm Height on feet: 930 mm Weight: approx 1 T
Available in stock 1 x Used Capstone ECM Control Board (P/N 512300-030). Most commonly used for Microturbines C60. Please note that this is an used and damaged board, buy it only if you wish to use it for parts or to refurbish. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced
Pressing tool, clamping pad, square profile, support profile, alignment pad -Square profile: clamping base, support profile, alignment base -Length: 515 mm -Number: 3x profile available -Price: per piece -Dimensions: 515/97/80 mm -Weight: 28.3 kg/pc.
Jungheinrich EKX 513 High Rack Stacker / Three-Way Stacker For sale is a used Jungheinrich EKX 513 high-rack forklift or electric picking/three-way forklifts for high-bay warehouses. The device comes from ongoing operation and is currently still in use. The truck is expected to be available from July. Viewing possible at any time by arrangement. Particularly noteworthy is the new Jungheinrich battery from 12/2025 with 80V and 465 Ah. In addition, an MPSA 3000 mobile personal protection system from Lagertechnik Müller und Partner is installed. Technical data Manufacturer: Jungheinrich Model No.: EKX 513 Type: Electric order picking/three-way stacker Year of Make: 2007 Operating hours: approx. 4,100 h Net weight: approx. 7.5 tons Battery voltage: 80 V Battery capacity: 465 Ah Battery Year/Week: 12/2025 (NEW) Battery weight: approx. 1,238 kg Main stroke: 5,500 ...
3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.
CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy
Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Quantity: 5x mounting cubes available -Price: per piece -Dimensions: 510/810/H510 mm -Weight: 746 kg
max. format 36.50 x 52 cm Year of construction: 1998 Shed feeder Ryobi Filmfechtwerk SuperDampener Cooling unit MGE ECO Plate quick-release rails Dry pollinators Delivery date: immediately Price on request. We deliver and install worldwide!
Speed control unit GAC-ESD5131 1 piece(s) available, with original packaging
Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.
1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m
12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.
The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: blue Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | pcs.: 0,785 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pl ...
The scope of delivery includes: 112x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: blue Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | pcs.: 0,785 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the p ...
The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: red Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | Pcs.: 0.790 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pla ...
The scope of delivery includes: 112x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: red Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | Pcs.: 0.790 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pl ...
CREEL KNIFE - CUTTING CREEL FOR DICE CUTTER MACHINE TREIF - USED 1 set. GATE KNIFE D = 20 mm for cube cutter TREIF FELIX AND FOR TREIF DERBY Art.Nr. 51823 1 set CREEL KNIFE D = 26 mm for cube cutter TREIF FELIX CE Art.Nr. 51818 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl
MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Transnorm belt conveyor GF 5100-700-600 RA2105 Technical data: Conveyor length (NL): 5100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): Frequency converter for stepless speed control Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5100 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: freel ...
curved belt conveyor curved belt 30° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 30° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 30° Direction: Right Nominal radius/radius of indoor RN: 1630 mm BN width: 510 mm Total width: 640 mm Drive location: outside pulling installed power: 0.37 kW constant conveyor speed: v = 0.9 m/sec. Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 900 x 800 x 700 Weight (gross): 90 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 1630 Nominal / outside width in mm: 640 Belt width in mm: 510 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,90 scope of delivery: without supports and si ...
Transnorm Rising falling Incline with arch belt conveyor GF 5140-600-500 RA2082 Technical data: Conveyor length (NL): 5140 mm (4640 mm incline + 500 mm arch) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5140 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentr ...
Data sheet of retrofit POS. GE 40.40 Gebhardt roller conveyor (without drive), FB = 450 mm, 8.900 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 8.900 mm Conveyor width: FB = 450 mm Overall width B = FB + 60: B = 510 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 8900 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
used
Recon Part number: 30.4012-500/10 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 26.06-144M Air Launch any speed Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 26.10-26/01 ground thin shaft 114.5/99.5 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic
ABG OMEGA 510 Converter Manufacturer: ABG Machine type: Omega 510 Converter Type: Blanco labelling machine Year of construction: 2010 Working width: 520 mm Number of punching stations: 2 Equipment: Unwinding - 76 mm Splicing table Side edge control Grid take-off and matrix rewinder/grid rewinder Label converter/label shifter for 110x75 mm format (not ABG) Slitting station with 4 shear blades 2 separate rewinding axes Tools: o Magnetic cylinder 134 Z or 16.75" o Magnetic cylinder 161 Z or 20.125"
Key data: 1050 mm, 510 mm, 510 mm
Inv. Num. : 7111 Type: NEXUS 510 C Producer: MAZAK Created: 2008 Parameters: Control system: MAZATROL MATRIX NEXUS Duty cycle: 14206 h Hours: 4777 h Work table length: 1300 mm Work table width: 550 mm Spindle drive power: 11 kW Speed: 12,000 rpm X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Number of stacking positions: 30 pieces Machine weight: 6886 kg Equipment: Tool Probe IKZ
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marx Transformatorenbau GmbH & Co. KG Transformer Type: DAY 516 Pri: 3x480V/777A Sec: 3x400V /909A 60Hz 630kVA Two Wöhner LTS-3 630A load disconnectors are installed at the tap, each equipped with three Siemens 400A and 630A NH3-gG.
Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER
DMG CTX 510 ECO CNC turning center built in 2011 is used for precision machining of workpieces with a maximum diameter of 465 mm. This extremely efficient and perfectly optimised machine features a specially constructed, inclined bed that effectively dampens all vibrations and oscillations. This solution ensures the highest possible process stability, bringing results such as improved workpiece surface quality or increased cutting tool life. Workpiece machining is carried out using reliable components in the form of a high-speed spindle and cutting tools taken from a 12-position turret. Tools are changed in a very short time, so that the overall process time is significantly reduced. The DMG GILDEMEISTER CTX 510 ECO CNC lathe also features an intuitive SIEMENS CNC control and an integrated chip conveyor. The total weight of the machine is 7800 kg. Technical parameters of the DMG CT ...
DMG GILDEMEISTER CTX 510 CNC turning center was built in 2008. Designed for machining workpieces with a maximum diameter of 465 mm, the machine features a fully illuminated workspace, a high-speed spindle and high-end cutting tools. The extremely stable design combined with the perfectly optimised SIEMENS CNC control ensures maximum process efficiency, even during the most intensive production work. The DMG CTX 510 CNC lathe weighs 7500 kg. Technical specifications of the DMG GILDEMEISTER CTX 510 lathe - maximum turning diameter: 465 mm - maximum swing diameter: 680 mm - maximum swing diameter above cross guideway: 465 mm - maximum external diameter of clamped workpiece: 400 mm - feed in the X/Z axis: 300/1050 mm - rapid traverse in X,Z axis: 30 m/min - maximum spindle rotational speed: 3500 rpm - spindle passage: 97 mm - spindle drive power (40%/100% DC): 42/31 kW - chuck s ...
used
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Motor control for an MWM 518A for sale. Other spare parts for the engine also available: -Starter -Turbocharger - Exhaust manifold with temperature sensors -Oil pump
MWM 518A turbocharger for sale. Other spare parts available: - Exhaust manifold with temperature sensors -Starter - Expansion tank -Water pump
Starter MWM 518A Bosch 0 001 402 065 24V, 4HP Other spare parts for the engine also available: -Engine timing -Turbocharger - Exhaust manifold with temperature sensors -Water pump
Exhaust manifold MWM 518A with temperature monitoring for sale Other spare parts for the engine also available: -Starter -Turbocharger -Engine timing -Water pump
Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...
turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 6000 mm workpiece weight: 30 t turning speeds: 100 U/min : total power requirement: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reference Num.: 3478 Brand: Ryobi Type: 512 Construction year: 1996 Impressions: 55 mio Size: 520 x 365 mm Available: directly Status: In production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 365 mm Printing speed: max 11,000 sheets/hour Printing units: 2 Paper thickness: 18.11 mm Machine size: Length: 2,215 mm, Width: 1,561 mm, Height: 1,598 mm Total weight: kg 2,200 / lbs 4,850 Equipment: - Crestline Filmfeuchtwerk
maximum number of results exceeded
please refine your search
