shredder schleicher intimu used for sale

ALL PURPOSE 2-SHAFT HEAVY DUTY, HYDRAULIC SHREDDER 1.600 mm.220 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.600 mm long shafts Shredding chamber :1.600 x 1.700 mm, Hydraulic motors 2 x 110 kw, planetary gearboxes, inverter for reverse movement on pre-settable threshold, n.11 knives, 60 mm.thick, 4 hooks (or bespoke to project), Electrical control sy ...

ALL PURPOSE, SHREDDER 1.000 mm.45 kW, This is a new machine engineered to offer the best possible results in size reduction of various materials.for plastics, cardboard, pipes, paper, cables, tires, wood and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., This is the standard size, the most versatile in its range., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 45 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ra ...

ALL PURPOSE, SMALL SHREDDER 600 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 600 mm. Rotor diameter 190 mm, n.22 bolted reversable cutting pieces 40x40 mm. Motor power 18,5 kW (or bespoke to project), belts transmission to STM gearbox, Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with adjustable run, 0,75 kW hydraulic pack, control cabinet with PLC Siemens 1200 + Siemens HDMI 4” panel., Sturdy supporting structure in solid carbon steel, forklift slits, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Possible Industry 4.0 confirguration on separate offer ...

ALL PURPOSE, SINGLE SHAFT SHREDDER 1.300 mm.55 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.300 mm. Rotor diameter 450 mm, Shredding chamber 1.300 x 650 mm. Motor power 55 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure in solid carcon steel, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.germanplast.eu/listings/4462316-conveyor-with-metal-detecto r) and [extraction](.germanplast.eu/listings/4115563-used-extraction-belt-450 -x-3-5 ...

The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales, the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc dri ...

Doppstadt Büffel DW-3060 BioPower Type D with recirculation HS-401. Year of manufacture 2015, 6877 operating hours. The shredder served as a replacement device and is in good condition. Only wood and green waste were processed with it.

Manufacturer: Hammel Model: VB 950 DK NR 60 Year of Manufacture: June 2008 Weight: approx. 42 tons Operating Hours: approx. 6,000 hours Configuration: Mobile on crawler undercarriage Paint Finish: RAL 3020 (red) Refurbished: 2025 Refurbishment Work Carried Out in 2025 - New main gearbox installed - Hydraulics replaced (except main pumps) - Full hydraulic system flush completed - Tank cleaned and all oils changed - Fuel filter replaced - Partially repainted Drive / Engine - Engine: Caterpillar C-18 - Power Output: 522 kW / 710 PS - Idle Speed: approx. 700 min-1 - Working Speed: approx. 1,900 min-1 - On-Board Voltage: 24 V Shredding Shafts - Rotor Diameter: approx. 870 mm - Shaft Configuration: 6-part, 8/8 discs (waste/bulk) - Working Width: 2,445 mm - Shaft Speed (automatic mode, no load): approx. 36 min-1 Discharge Conveyor - Belt Width: 1,400 mm - Belt Type: Cleat belt, s ...

ALL PURPOSE, SHREDDER 1.000 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., Ideal to start your own small business or to be dedicated to a few particular scraps., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 18,5 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.ger ...

ALL PURPOSE 4-SHAFT SHREDDER 1500 mm.134 kW, for plastics, cardboard, cables, WEEE and more, This is a versatile 4.shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic, this machine comes from our long experience in size reduction., Service is available with us and our 24/7 post-sale assistance guarantees that you will never be let down., Rotor width 1.500 mm. Shredding chamber :1.500 x 1.200 mm Motors power 2x45 kW + 2x22 kw kW (or bespoke to project), planetary gearboxes, inverter for reverse movement on pre-settable threshold, Knives: 30+30 50 mm thick, 2 hooks (or bespoke to project for material , size and no.of hooks), screen : 50 mm holes (or bespoke to project), Electrical ...

Powerful, little-used pre-shredder for cables and other materials. Workshop tested and with 12 months used machine warranty. Adjustable cutting gap for consistent performance. Low tendency to bridge formation thanks to two vertical funnel walls. Rotor cover for better sensitive control. Pre-installation for cooling the rotor shaft from the inside. Hourly output up to approx. 500 kg (depending on the material and screen size) Drive 19.5 + 2.5 kW, 400 V The machine can be viewed and tested. more information at Recyclinganlagen.info

Manufacturer: Komptech Model: Terminator 6000 S Type: Single-Shaft Shredder Year of Manufacture: 2011 Total Power Output: 320 kW Drive: 2 x 160 kW electric motors Operating Hours: 23,868 h Machine Weight: 15,000 kg Overall Width: 2,870 mm Overall Length: 4,720 mm Overall Height: 2,088 mm Drive Train: 4 x 5-groove power belts, 2 reversing gearboxes, 2 planetary gearboxes Drum Speed: 20 rpm (forward) / 28 rpm (forward) / 15 rpm (reverse) Shredding Drum Length: 3,000 mm Drum Outer Diameter: 1,070 mm Drum Tube Diameter: 770 mm Adjustable Gap: 0 - 50 mm Noise Emission: 92 dB(A) at 1 m distance Known Defects: None Condition: Used Find more here - / Contact us at -

Komptech Crambo 5200 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447202 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447211 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447248 Facilities Crambo 5200 D directT4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447221 Facilities Crambo 5200 D direct T4f/ StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 6000 e-mobile Facilities Crambo 6000 e-mobile PVG3fach 50Hz 6000 e-mobile / 280KW Connect! Machine documentation Switchgear 6000 IEC Single Connector 9-Pin Extension 9-pin connector VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Discharge belt 6.5 m Overbelt magnet Trailer Documentation Chassis Underride protection extension Trailer+ÜBMA E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication Auxiliary unit Fire extinguisher Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Terminator # 481148 Facilities Terminator 5000 D T4F/Stage V EU Declaration of Conformity Terminator 5000 spec. Hook/Trailer Engine Oil Drain C13/C18 Trailer Connect! Roller TM-F 32 Teeth Counter comb TM-F armored Labyrinth Waterproofing HD Discharge belt 6.5 m Overbelt magnet Trailer Slip-on shoe 50mm incl. safety device E-air compressor for supply trailer Trailer drive-up device Wireless remote control Central lubrication Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...

Document Shredder LEITZ IQ Autofeed Small Office 100 P4

Manufacturer: UNTHA Model: LR1000 Type of Machine: Industrial Shredder Power: 44 kW Hopper Volume: 380 L Condition: Complete and operational. Used machine.May require some maintenance or refurbishment depending on intended use. Included Components: Electrical control cabinet Find more here - / Contact us at -

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-48581-281

Code: 0436 Brand: COMAFER Model: BRIO 580 - CE Standard Hydraulic shredder for wood waste, aluminium, plastic materials, cardboard, packaging, and other materials - CE Standard Feed opening dimensions 965 x 580 mm Knife shaft diameter and length 162 x 450 mm N° 42 reversible and resharpenable knives Shaft speed 236 Motor power 10 Hp Hole diameter 10 mm Hourly output 100/200 kg Suction inlet diameter 150 mm Hydraulic power unit 2 Hp Overall dimensions mm 1050 x 1700 x 1430 h Weight kg 900

TECHNICAL DATA: Dimensions hopper opening: 2000 x 1200 mm Installed power: 23.5 kW Rotor width: 850 mm Capacity: 300/400 kg/h Sieve: Ø 28 mm Interchangeable single blades

Professional Hansa C13 branch shredder in very neat condition, designed for efficiently processing branches, prunings and other green waste. Equipped with a reliable Honda GX390 four-stroke petrol engine of 13 hp (9.5 kW), this powerful machine features a robust dual-belt drive cutting wheel for high throughput and long life. The rotatable discharge chute makes it easy to eject the wood chips into a trailer or at a desired location. Thanks to the large transport wheels, the machine is easy to move on a variety of surfaces - Max. branch diameter: 90 mm, Cutting system: 2 hardened blades, Blade dimensions: 200 × 58 × 10 mm, Cutting disc: Ø 560 × 12 mm, Double belt drive, Swivel ejection pipe, CE marked - unused, immediately and auctionable Auction-ID: A3-46192-10179

TECHNICAL DATA: Inlet opening: 1250 x 850 mm Installed power: 15 kW Rotor: Ø 250 mm Rotor width: 850 mm Interchangeable single blades 040 Knife Sieve: 30 mm EQUIPMENT: 01 Screen with 15 mm mesh size 01 Screen with 40 mm mesh size

2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.000 mm, 40 mm.knives - 1 hook, 1.000 x 700 mm shredding room, planetary gearbox, Electric motor 30 kW 400v 50hz, Hydraulic pack with 125 lt.tank, loading hopper 1.700 x 1.400 mm., New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Weight 2.900 kg ca, Dimensions 1.560 x 2.350 mm - hEIGHT 1.445 mm + supporting structure (max 1,500 mm), width: 1.000 mm. , Power: 30 kw

Machine 1 : Shredder Manufacturer: Lindner Model: Antares 1600 Year of manufacture: 2019 Condition: Not used General machine data: - Number of knives 40 pieces - Knife shape 65 x 65 x 28 mm. - EX protection: no - Screen perforation diameter 30 mm - Noise level 104.88 dB(A) - Coating RAL 7047 / RAL 5003 / RAL 7016 - Machine weight 8 t. - Rotor speed 100 rpm - Climate conditions 0-35 degrees C / 40-80% relative humidity - Rotor cooling: no Drive - Manufacturer ABB - three-phase AC motor (1x) - Power 75 kW - Speed 1500 rpm. - Terminal box: open - Frame form B3 - Frame size 280 S - Voltage/frequency 3x400V / 50Hz. - Frequency converter: no. Direct drive - gearbox (1x): Belt ratio motor/gearbox i = 15. - Belt motor/gearbox 6x SPB2850. - Type Stiebel - Type 5052-ZP - Gear oil CLP 220 - DIN 51517-3 - Fill quantity 20 liters - Safety coupling RS200.2. Hydraulic equipment: Manufacture ...

Manufacturer: BHS Model: RAPAX 1516 Type of machine: Dual-shaft industrial shredder Application: Pre-shredding of metals, commercial, industrial, and construction waste Technical Details : - Motor power: 2 x 110 kW as installed on this unit, within the RAPAX 1516 model range of 180 to 264 kW - Torque: Up to 50,000 Nm - Voltage: 400 VAC delta - Frequency: 50 Hz - Rated current: 2 x 199 A - Control voltage: 24 VDC - Operating temperature range: -10 degrees C to +40 degrees C - Permissible humidity: less than 95 percent - Total weight: 27000 kg - Length: 4700 mm - Width: 2750 mm - Height: 4800 mm - Noise emission: workplace related emission value less than 110 dB(A) - V-belt drive: Powerband RP 2x3 grooves SPC 2800x6, equal length, 2 belt drives - Motor pulley diameter: 250 mm - Rotor pulley diameter: 355 mm - Center distance: 922 mm - Pretension force per belt drive: 16000 N - Control ...

Hammers Input carpet Working condition and performs everything that needs to be done Auction-ID: A3-46167-11951

VREDO Self-Propelled Trac – Wood Processing / Infeed System General data: Manufacturer: Vredo Machine type: Self-propelled processing unit Year of manufacture: 2012 Equipment: FTG 400 infeed crane with tree clamp 3x infeed rollers Folding hopper Wear plate blow pipe Description: Self-propelled VREDO Trac unit equipped with infeed crane and wood handling system, designed for forestry or biomass processing applications. The machine enables efficient feeding, gripping, and processing of logs or branches, making it suitable for wood chipping, shredding, or biomass preparation operations. Auction-ID: A7-40556-30

Technical data HP DesignJet T120 Large Format Plotter Manufacturer: HP Model: DesignJet T120 Product number: CQ891C Year of manufacture: 2018 Shredders Manufacturer: IDEAL Model No.: 2445 Year of Make: 2016 Auction-ID: A1-48536-151

Machine type: Slow speed shredder Manufacturer: DOPPSTADT Model: DW 2560 Serial number: 0900DW218V09427 Year of manufacture: 10/1995 Gross weight: 18,000 kg Equipment: - Feed hopper - Discharge conveyor belt - Control panel on side - Twin axle trailer chassis - Tow bar Condition: - NOT-working - Visible wear, corrosion and paint damage - Conveyor belt shows signs of usage - Interior shredding chamber worn Remarks: - Mobile shredder for wood, green waste and bulky materials - Trailer-mounted unit - Ideal for recycling and waste processing applications - Inspection recommended Own mass: approx. 18,000 kg Auction-ID: A7-48897-32

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-48621-56

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-48622-56

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-48621-138

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-48622-138