shredder 2 shaft used for sale

- deutsche Buche - Länge 2100 mm - Tiefe 780 mm - Höhe 815 mm - Gewicht 135 kg

- NEU - Tragkörper aus Stahl - Druckleistenspannung - Wekzeug FI 145 mm - Falzbreite 15,2 - Bohrung 40 mm - MEC

Technische Daten: - max. Schleiflänge 300 mm - max. Schleifhöhe 200 mm - max. Werkzeug FI 380 mm - Drehzahl Schleifscheibe 3500 U/min - Motor 590 W / 400 V - Vorrichtung zum schleifen von HM Sägeblätter bis 630 mm - Vorrichtung zum Schleifen von Bohrern und Schaftwerkzeugen - Aufspanndorn FI 25 , FI 30 und FI 40 mm - Kühlmitteleinrichtung von oben mittels Kunststoffgelenkschlauch verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - gesamte Bedienung von der Vorderseite - Gleitmittelpumpe - Diamantschleifscheibe FI 150 x 16 mm - Abmessungen L=800, B=1000, H=1600 mm - Gewicht 350 kg

Technische Daten: - 2 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 4,0 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Filterflaeche 11,7 m2 - 30 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 2 x 70 l - Ansaugstutzen 200 mm - Volumenstrom Nominal 3300 m3/h - Volumenstrom Minimum 2200 m3/h - Unterdruck 2600 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 2570 mm, B= 1.100 mm, H= 2.490 mm - Gewicht 400 kg

Technische Daten: - 4 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 5,5 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Stromaufnahme 32 A - Filterflaeche 23,5 m2 - 60 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 4 x 70 l ges. 280 Liter - Ansaugstutzen 250 mm - Volumenstrom Nominal 5400 m3/h - Volumenstrom Minimum 3500 m3/h - Unterdruck 2800 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 3480 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 900 kg

Technische Daten: - Arbeisfläche 2500 x 1000 mm - Absaugstutzen Durchmesser 160 mm - Abmessungen L=2850, B=1000, H=750-1050 mm - Elektroanschluss 230 V / 50 Hz - Druckluftanschluss 6 - 8 bar - verstellbare Standfüsse 750 - 1050 mm - 2 Steckdosen 230 V - 2 Druckluftkupplungen - Randabsaugung - werkstückschonende Holzauflage - seitlicher Absaugstutzen - Energieleiste mit Werkzeugablage - Hauptschalter und Schalter für die automatische Ansteuerung von Absauganlagen und Absperrschiebern - Standard: Absaugstutzen und Bedienseite rechts

- Pressfläche 3000 x 1600 mm - stabile Stahl-Heizplatten 42 mm mit Thermo-Ölheizung - Gesamtpressdruck 200 t (4,2 kg/cm2) - 8 Hydraulikzylinder 120 mm - 2 kurze Hydraulikzylinder FI 80 mm - Schließgeschwindigkeit 20 - 60 mm/sec. - Öldruck 20 Mpa - Vorschubgeschwindigkeit 15 m/min - Heizplattenleistung 45 kW - max. Temperatur der Heizplatten 120 CC - Gesamtanschluss 10 kW - Abmessungen L=5500, B=4000,H=2250 mm - Gewicht ca. 8000 kg

Technische Daten: - max. Arbeitsbreite 250 mm - max. Arbeitshöhe 80 mm - Vorschubgeschwindigkeit 5 - 18 m/min - Sägewellen FI 50 mm - Sägeblatt Keilnut 16 x 5 mm - Drehzahl Sägewelle 4000 U/min - max. Sägeblatt FI 300 mm - Motor Sägewelle 22,0 kW - Motor Höhenverstellung 0,37 kW - Motor Vorschub 0,75 kW - Gesamtleistung 25,32 kW - Abmessungen L=3076, B=1250,H=1600 mm - Gewicht 2000 kg inklusive: - hart verchromte Tische

Technische Daten: - max. Schnitthöhe 280 mm - min. Schnitthöhe 150 mm (100 mm) - max. Arbeitsbreite 300 mm - min. Werkstücklänge 800 mm - Vorschub 3 - 15 m/min. - Sägewelle ø 60 mm - Drehzahl 3000 Upm. - max. Sägeblatt ø 405 mm - min. Sägeblatt ø 305 mm - Motor Sägewelle oben 45 kW - Motor Sägewelle unten 45 kW - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 94,75 KW - Spannung 400 V / 50 Hz - Vorschubwalzen ø 140 x 50 mm - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Absaugstutzen 4 x 140 mm - Arbeitshöhe 860 mm - Abmessungen L=3550, B=1450, H=1800 mm - Gewicht 3500 kg

- trockenlaufend, luftgekühlt - 3~Motor 5,5/6,6 kW 960/1150 U/min - Spannung 400 V +/-10% 50Hz// 460+/-10% 60Hz usable60Hz: Y 400V+/-10% (ohne IE2) Bi-Metall 155CC, IsoKl.:F, IE2 - Vakuumsicherheitsventil - Abblaseventil - Abblaseschalldämpfer - Komplett montiert - Fettpresse mit Fett gefüllt - Farbe: Ra l9007 Graualuminium

Transformer - Voltage Transformer 500 --> 230V 100kVA Manufacturer Hinzen Type DU80-127kVA Power 100kVA Primae 3x500V 118A Sekundaer 3x230V 263A Hz 50-60 Insulating-Kl.E Special price

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.

Planetary mixer with whirler tool, 2 mixing stars, 4 mixing shovels and scraper / discharging shovel. Maximum capacity per batch: 2.250 l. / 3.600 kg, hardened concrete output per batch: 1.500 l., processable grain sizes: 0 - 65 mm, with dual outlet (operated hydraulically). Incl. main drive 75 kW and many spare parts.

Qty. 1 Second-hand extrusion press Mfc.: SMS – Schloemann Built: 1997 Force: 2200 MT Type: direct Operation pressure: 250 bar Billet dia.: 8” – 203 mm Length: 900 mm Force Main piston: 19.64 MN Feeding piston: 2.45 MN Retreat force: 1.18 MN Press stroke: 2100 mm Press speed: at force 22 MN (250 bar) up to 19.0 mm/sec. At force 15.4 MN (175 bar) up to 26 mm/sec.

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Pfeiffer Type: BA251 Status: Rebuilt Warranty: 12 months Accessories: owner's manual Resources: Mineral oil or by appointment Suction power: 250 m ³/h Enddruckmit GASB.: approx. < 5x10e-1 hPa (mbar) Delivery time: approx. 1-3 weeks u.ue.V. Delivery: Ex works; ready for operation

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; As capacity: 12 months Yield time: from stock Manufacturer: Busch Type: R5 RA 255D Engine: 400V Equipment: Mineraloile Nominal suction digesters: 250m3/h Final pressure: 0.5 mbar (abs.) Zubehoer: User Manual; Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you.

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

Qty. 1 Second-hand extrusion press Mfc.: SMS - Hasenclever Force: 2500 MT Built: 1990 Container for flat billets Width: 375 mm Height: 140 mm Billet length: 1000 mm Stem length, max.: 950 mm Consist of: Extrusion Press Body Cylinders Motors Hydraulic tank Qty. 2 Containers (8” & 9”)

new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm

Used spiral kneader IBIS, for 240 kg dough -In bakery condition - - for 240 kg dough - incl. 1 tank wagon (more available)

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Was installed in a Husky injection moulding machine

For sale a CNG natural gas traportable bundle Wystrach 600 litre 200 bar. Operating pressure: 200 bar Built: 2005 steel-built Dimensions: 120 x 80 x 180 cm Weight: 1000 kg

The machine has been dismantled and has been in our warehouse since 2015, it is used and was in use in a turkey slaughterhouse with underbeam, conveyor belt and articulated rupee.

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Bohle BFC 200 Ex CIP Film Coater for tablets, etc., batch size from 100 to 300 litre, spray arm with up to 6 spray nozzels, CIP-system, 37 kW, Siemens SIMATIC S5, machine net weight approx. 2500 kg, includes inlet air preperation/handling and exhaust air handling

Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm

From stock dissolution, unused. 1 x Leroy Somer OT 2603 V33D U N 138084801/001 gearbox Flange: 35 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.

REF-2102 DOUBLE TWIST HARD CANDY WRAPPER GD BOLOGNA Machine number 1. Format: 1.2. Dimensions: 1.300mm width, 2.200mm length, 1.700mm height.

Autoklave 260 l.,stainless steel,ALA,steam heated,2 bar,bolted lid,Ø 590 mm

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 209L.

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Advantages of Aflatek Screw10A-200: -Powerful 7.5kW electrical motor. -Integrated 200l air tank. -Air and oil filter already included. -Low noise and vibrations level. -Compact, vertical design. -Up to 10 bar pressure. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Air supply at 8 bars, L/min: 1100 Air supply at 10 bars, L/min: 910 Outlet diameter, inch: 3/4'' Noise Level, dB: 64 Air tank, L: 200 Dimensions, (length x width x height), mm: 1250x590x1600 Weight, kg: 330 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1400x700x1800 Weight, kg: 360 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Back wall grille for pallet rack , grid mat , kennel, lattice fence, wire mesh, lattice back wall Dates/ Price: 220 x 200cm = 60 € net, 71,40 € gross 220 x 150cm = 50 € net, 59,50 € gross Mascht : approx. 4 x 10 cm Galvanized Second-hand goods Holder piece. 10€ net --AVAILABLE MULTIPLE TIMES------

Used machine in good condition. Available for immediate delivery.

- Levelling support - 16 cooling circuits: Total 21 - Barrier type screw, bimetallic type - Interface colorimeter - Interface Robot Euromap 67 - Air Valves: 4 - Clamping force: 2.100 kN - Screw diameter: 52 mm - Shot weight max: 455 g - Injection pressure: 1690 bar - Injection volume: 500 cm? - Mould height max: 650 mm - Mould height min: 200 mm - Platen size (h x v): 900 x 790 mm - Distance between tie-bars (h x v): 630 x 530 mm - Core pulls: 2 pneumatic + 2 hydraulic - Operating hours: 38.233 - Power: installed max: 43 kW - Weight: 9.480 kg - Dimensions (long x wide x high): 6.800 x 1.540 x 2.200 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 65 mm - Clamping force: 2.500 kN - Shot weight max: 1.072 g - Injection rate: 3.100 cm?/s - Injection volume: 1.128 cm? - Mould height max: 650 mm - Mould height min: 200 mm - Platen size (h x v): 910 x 840 mm - Heating zones: 4+1 - Distance between tie-bars (h x v): 630 x 560 mm - Control: 0 - Oil tank capacity: 800 l - Operating hours: 0 - Weight: 14.500 kg - Dimensions (long x wide x high): 7.395 x 2.215 x 1.920 mm

with Sepro robot - Distance between tie-bars (h x v): 640 x 625 mm - Screw diameter: 55 mm - Shot weight max: 595 g - Injection rate: 310 cm?/s - Injection pressure: 1.906 bar - Injection volume: 614 cm? - Screw speed: 318 rpm - Screw L/D ratio: 23,5 - Clamping force: 2.750 kN - Mould opening stroke max: 580 mm - Mould height max: 640 mm - Mould height min: 200 mm - Daylight between platens max: 1.220 mm - Platen size (h x v): 935 x 920 mm - Control: CINCINNATI MILACRON CAMAC 486 - Power: installed max: 32 kW - Dimensions (long x wide x high): 7.500 x 1.510 x 2.377 mm - Weight: 11.698 kg

with - Screw diameter: 60 mm - Clamping force: 200 kN - Injection volume: 508 cm? - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: 60.000 - Power: installed max: 15 + 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg

Dear Sir or Madam, we have now available used transformer stations Year of construction : 2001-2002 Power : 1600KVA Primary voltage : 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 total weight per station is 12.5 tons Dimensions: Length = Width = Height = Immediately ready for use and available, nationwide cheap delivery. If you have any further questions, Mr. Schmidt Techn. Purchasing is there for you, available Monday to Saturday from 8 a.m. to 10 p.m. and in case of emergency 24 hours

Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.

- Producer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of construction 2007 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Max. part height 70 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp max. 120 W/cm - Electic capacity lamp infinitely variable - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 86 A / 36,4 kW - Voltage fluctuation max. +/- 5 %

Transformer station with prefabricated concrete building L = 3,20m W = 1,50m H = 1m + 1,45m 200 kVA Doors are available.

Level limiters for water-polluting liquids for sale. Afriso / Fafnir NB 220 QS for 220V AC 10 pieces available, all in original packaging.

New devices that are no longer needed Product information "Eaton Undervoltage Release, 208-240VAC 259499" The Eaton Low Voltage Release, 208-240VAC 259499, is an optional accessory that offers an extensive portfolio of applications for worldwide use. Its installation is flexible and easy thanks to modular functional groups. The use of the undervoltage release enables an immediate shutdown of the circuit breaker NZM, or switch-disconnector N when the control voltage drops below 35-70% US. The undervoltage release, when de-energized, prevents the main switch contacts from touching during switch-on attempts, which ensures high safety. The undervoltage release is not at the same time as leading auxiliary switch NZM. -XHIV.. or working current release NZM.. -XA.. can be installed. It is suitable for circuit breakers and load switches. The rated control supply voltage Us at AC 50 Hz is  ...

Double motor module SINAMICS, 2x3A, 6SLE120-2TE13-0AD0, Siemens, mint condition -40% Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Douple motor module, SINAMICS, 2x3A, 6SL3120-2TE13-0AD0, Siemens, - Input: DC 510-720V 7.2A - Output: 3AC 0-480V 3A/3A 0-550Hz - Control: DC 24V, Brake Output: DC 24V 2A/2A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabil ...