shredder 2 shaft used for sale

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...

CATALOG NO. 7239 TECHNICAL DATA - shaft width 350mm - shaft diameter 260mm - inlet width 350mm - inlet height 120mm - number of knives 11 pcs - autoreverse - sieve dimensions 18x12mm - toothed shaft pulling from the bottom 0.75kW - toothed shaft pulling from above 0.75kW - with vibrorine - vibrochute length 3280mm - vibrochute width 335mm - vibrochute motor 0.75kW - main engine 22kW - feeder dimensions length/width/height 3280x600x510mm - machine dimensions length/width/height 1600x950x850mm - weight 1150 kg – German production - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 36900 PLN Net price: 8200 EUR depending on the price 4.50 EUR Net price: 9711 USD depending on the price ...

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

32 solid single flails

With magnet

- diesel engine CAT C9, approx. 261 kW / 350 HP - shafts 7/7 discs with 5 knives per discs (reconditioned) - breaker bar with combs (reconditioned) - Hook Lift Frame - wheel axle with drawbar - Permanent obverband magnet - weight approx. 18 t

Ripper 1 shaft with hydraulic pusher, brand: Vecoplan, rotor measures: 1600x350 mm, dice: 40x40, motor: 75 Kw (100 hp), hopper measures: 1600x2200 mm. No electrical panel.

Ripper 1 axle, with hydraulic pusher, brand: Vecoplan, rotor measures: 1580x350 mm, die: 40x40, motor: 75 Kw (100 hp), hopper measures: 1580x2200 mm. With electrical panel.

Plastic shredder , shredder CMB ML 16 STD inlet: 220 x 220 mm motor: 2.2 kW 380 V mobile ! used, checked ! Dimensions: 550 x 700 x 1600 mm No spare blades in stock

SPECIFICATIONS: Crushing chamber mm: 2000 x 1500 Rotor length mm: 800 Installed capacity KW: 18 Capacity: 300/500 kg per hour Screen diameter mm: 18 Hydraulic operation

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

Manufacturer: Mercodor, Type: ZM 44, Year: 1992, Control: yes, Number of rotors: 2, Number o knifes: 33, kW power rotor: 7,5, Feeding width mm: 500, Feeding hight mm: 650, Length/width/height: 1400x1050x1500, Wight approx. kg: 350, Year :1992

Manufacturer: Prodeco, Type: M1, Year: 2012, Number of rotors: 1, kW power rotor: 15, rotor diameter mm: 240, Dimensions of funnel in mm: 1000 x 800, Length/width/height: 1615 x 1000 x 1500, Wight approx. kg: 1080, Year :2012

AGICOM recycling machines: Cable shredder/granulator IRS PM1840 used. Technical Data Cable Shredder: 5.5 kW, 32 A Perforated screen 10 mm; LxWxH: 135x120x212 cm approx. 550 kg

- electric engine, approx. 2 x 110 kW - shafts 7/7 discs with 5 knives per discs (reconditioned) - breaker bar with combs (reconditioned) - Hook Lift Frame - water sprinkling system - discharge belt with a discharge height approx. 3,400 mm - Remote control - weight approx. 20 t

- Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - Built in 2013 - only 12,500 hours - with second cutting table - Incl. power pack and control cabinet - Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - year of manufacture 2013 - only 12 500 hours - with second cutting table - with power pack

Recycling machine trade AGICOM- Pedergnana OG: The mulcher is used to recover iron and aluminum from high-voltage lines. Cable cross-sections: Ø 10 - 50 mm Power consumption: approx. 31 kW / 380 V Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Weight: approx. 3,500 kg

Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2

1-shaft ripper. Brand: Silmisa, model: MSA 630, cutting chamber: 700x630 mm, motor: 45 Kw (60 hp), rotor width: 630 mm, rotor diameter: 400 mm, year: 2004. With electrical panel with touch screen.

Specifications Cutting width: 6 x 40 mm Year of construction: 1994 Productivity: approx. 70 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s Security level: P3 Power supply: 380 V/2.2 kW Machine is fully functional, after technical supervision.

Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.

Specifications Maximum pressure: 6 tons Power supply: 400V / 2.2 kW Press force: 2.5 kg/cm² Year of construction: 1993 Bale size: 600x400x500 mm Productivity: approx. 3 bales/hr Bale weight: approx. 50 kg Price: on request Shredder Cutting width: 3.8 x 50 mm Year of construction: 1993 Power supply: 400 V/ 4 kW Price: on request Safety level: DIN 66399 O-2/P-3/T-3/E-2/

Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

Specifications Cutting width: 3.8×48 mm Year of construction: 1992 Productivity: approx. 40 sheets (A4, 70g/m²) Price: on request Cutting speed:- Safety level: P3 Power supply: 400 V / 2.2 kW Machine is fully functional, after technical supervision.

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.

Balemaster HL 160 – Air shredder system with feed belt, built in 2012 Specifications Manufacturer: Balemaster Europe Type: HL 160-Air Year of construction: 2012 Motor: 22 kW Feed width: 1600 mm Belt speed: 15 m/min Throughput: approx. 3.5 t/h Weight: approx. 4000 kg Material: corrugated cardboard, paper, cardboard boxes

1-shaft ripper with hydraulic pusher, brand: Zerma, model: ZSS 1200-E, cutting chamber: 1200x400 mm, motor: 55 Kw (75 hp), hopper: 1.57x1.12 m, year: 2010. Replacement brackets and blades. 1 New spare gearbox. With electrical panel.

Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.

2 shaft shredders with a rotor width of 1500 mm Diesel engine from CAT

Single-shaft chipper with rotor width of 122 cm Rotor diameter 500 mm 37 kw motor hydraulic gate valve New rotor bearings

Single-shaft chipper with rotor width of 150 cm with 37 kw motor with hydraulic slider

Feed opening: 800 x 1,000 mm; Hopper capacity: 0.8 m³; Throughput : 2.5 - 4 rm/h Material and screen dependent; Rotor diameter: 300 mm; Rotor length: 800mm; Number of tools: 20 teeth; Screening: hydraulic moving floor: Yes; Suction nozzle: 250mm; Air velocity: 28 m/sec; Motor power: 15kW; Hours: 4165;

- diesel engine CAT C7.1 Tier 4i - approx. 205 kW / 275 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control

- diesel engine Cummins B6.7 - Stage5 - approx. 209 kW / 280 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control - weight approx. 24 t

Product number: 2858 Type: PM.ZFG-00 Serial number: PM.ZFG-00 Year of construction: 2013 Power: 3 x 400V, 50Hz, 1.9kW Dimensions: 1600 x 1200 x 2100 mm Plucker for shredded meat

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Specifications Cutting width: 3.8 x 50 mm Productivity: approx. 70-75 sheets (A4, 70g/m²) Cutting speed: 217 mm/s Power supply: 400 V / 2.2 kW Year of construction: 1991 Price: on request DIN 66399 P3, O2, T3

- 2-axis ripper - Brand: August Seegers - Model: 120P5 - Cutting chamber: 1600x1400 mm - Engine: 131 Kw (180 hp) - Year: 1998. - No electrical panel. - Reference: MF-0065

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers

ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW

2-axis ripper Cutting chamber: 1000x500 mm two engines: 10 hp each. Total: 15 KW (20 hp). With electrical panel. Reference: MF-0087 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Shredder HSM Powerline FA 500.3, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of construction: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in 80g/m² sheet: 180-200 Hopper volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg

Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.

Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.