shr used for sale

Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

Untha RS40 Operating hours only 420 Motor 2x11KW Shaft length 750mm Knives are in top condition! For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message. Net price

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Two-shaft shredder Drive 37.50 kW

Stretch wrapping machine IMA model: MS300AM

Untha LR 1400 Year of construction 2008 Motor 30KW Rotor length 140cm Weight 3t The machine is used for: Pallets Solid wood OSB / Particleboard / MDF Construction timber and waste wood Wood with nails or screws For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively inspected before sale to ensure reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Hacker Zerbrik Motor 30KW Wavelength 1m Hydraulic Moving Floor Weight 3t Year of construction 2009 Dimensions: 1900x2600x1800 mm (LxWxH) Very suitable for pallets due to the long shaft, nails are no problem for the machine. For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Pester Pewo pack 450 compact

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2015. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: right. Used in a 60.000 cph line (+30% overspeed). Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.

Weima ZM 40 Motor 2x15KW Operating hours 1500 Cutting unit 750mm long Sieve 20mm New gearbox oil... Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message. Net price

Hydraulic wood splitter, functional Details on request

HugoBeck films packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items have been packed: Item size: 150 x 80 x 240mm – these in one pack 4 rows x 9 individual bottles with the dimension 730 x 600 x 245mm HugoBeck automatic film packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items were packet: Item size: 150 x 80 x 240mm - these in a pack of 4 rows x 9 individual bottles with the dimensions 730 x 600 x 245mm Envasadora automática de film HugoBeck con túnel retráctil - Año de construcción 2015 - Aprox.81.000 horas de funcionamiento (total) - Los siguientes artículos fueron embalados: Tamaño del artículo: 150 x 80 x 240mm - estos en un paquete de 4 filas x 9 botellas individuales con las dimensiones 730 x 600 x 245mm

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Edge strip shredder for edge trimming plastic films.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Part number 7974 SPECIFICATIONS - inlet of the widened loading hopper 1500x1730mm - outlet for shredded wood fi 200mm - rotor working width 990mm - main motor 22kW - 0.75kW pump motor - number of knives 54pcs - knife size 40x40mm - 20mm sieve - pressure drawer - electric autoreverse - dimensions l/w/h 2500x2200x2350mm - weight about 2000kg ADVANTAGES – German production - pulse pusher - Pusher to half - Fast/forward pusher – automatic speed adjustment of the pressure drawer – original DTR + CE documentation year 2018 – pressure drawer – viper – screw conveyor, responsible for transporting wood chips – autorever – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Meurer high speed wrapper type: CM/HEM 60 Grouping and shrinking of beverage packages. Fully automatically grouped, wrapped and shrunk in PE shrink film. the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format .

Part number 7975 SPECIFICATIONS - Inlet width 450mm - Inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 gear pulling shafts from the bottom - lower shaft motor about 2.2kW - Pulling shaft geared from above - upper shaft motor about 2.2kW - conveyor belt - Conveyor belt length 6500mm - conveyor belt width 400mm - main motor 37kW - 0.37kW conveyor motor - autorever (adjustable) - overall dimensions of the machine l/w/h 2400x1300x1100mm - overall dimensions of the conveyor belt length/width/height 6600x610x550mm - weight about 2500kg – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – with a 6500mm conveyor belt – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR  ...

Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A

Headquarters. Edge stiffener extraction

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Part Number: 7973 SPECIFICATIONS - inlet width 410mm - Inlet height 210mm - shaft width 430mm - shaft diameter 330mm - knife length 430mm - number of knives 2pcs - sieve dimensions 50x50mm - Pulling shaft geared from below - 1.1kW lower shaft motor - Pulling shaft geared from above - 1.1kW upper shaft motor - vibroryn - vibroline length 4160mm - vibroline width 370mm - main motor 45kW - autorever (adjustable) - reverse gear - overall dimensions of the machine l/w/h 2150x1450x1050mm - Overall dimensions of the vibroline l/w/h 4160x650x880mm - weight about 2500kg ADVANTAGES – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – reverse gear – DTR documentation – used chipper, very good condition Net price: 73900 PLN Net price: 17595 EUR depending on the price 4.20 EUR (Prices may cha ...

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Numer katalogowy 7742 DANE TECHNICZNE - szerokość wlotu 350 mm - wysokość wlotu 140 mm - szerokość wału 345 mm - średnica wału 290 mm - ilość noży 2 szt - wymiar sita 55x55mm - wał ciągnący zębaty z góry i dołu - silnik wałów 2×1,5kW - elektryczne autorewers (z możliwością regulacji) - z wibrorynną - długość, szerokość wibrorynny 3750×355 mm - wymiar cała wibrorynny 3750x620x1210mm - odbiorczy z taśmociągiem 2970x340mm - wymiar całkowity taśmociągu 3000x630mmx750mm - silnik główny 22 kW - wymiary dł/szer/wys 3000x1100x1500mm - waga około 2500 kg ATUTY – produkcja niemiecka – wibrorynna – z odbiorczym podajnikiem taśmowym – autorewers – rębak używany, stan bardzo dobry Cena netto: 47900 PLN Cena netto: 11405 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

PART NUMBER 8013 SPECIFICATIONS - Inlet width 450mm - Inlet height 210mm - Shaft width 450mm - shaft diameter 550mm - number of knives 2pcs - pulling shaft, geared from above and bottom 2×2.2kW - additionally, a geared pulling roller from the bottom in front of the pulling shaft - electric autorever (adjustable) - reverse gear - belt feeder - Feeder length 2260mm - Feed belt width 430mm - main motor 45kW - Total dimensions of the feeder L/W/H 4900x1700x1700mm - weight about 3000kg ADVANTAGES – with belt feeder – electric autorever – reverse gear – used chipper, very good condition Net price: 76900 PLN Net price: 18310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

PART NUMBER 8014 SPECIFICATIONS - inlet width 540mm - Inlet height 260mm - shaft width 560mm - shaft diameter 590mm - number of knives on the shaft 4pcs - Pulling, toothed feed rollers from above and below 2x4kW - Sieve 40x35mm - electric autorever (adjustable) - reverse gear - vibroline 2.2kW - vibroline length 6000mm - vibroline width 500mm - efficiency about 12-16mp/h (depending on the type of shredded material and sieve opening) - main motor 75kW - Automatic hydraulic lifting function of the upper feed roller - total dimension of vibrorine 6000x950x1600mm - total dimensions of the machine length/width/height 3400x1700x2000mm - total weight about 6000kg ADVANTAGES – vibrating feed table 6000mm – electric autorever (adjustable) – reverse gear – produced by the Polish brand OSKA – electrical diagram, DTR + CE documentation – unpainted – used ...

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

REF-827 SLEEVE WRAPPER AND SHRINK WRAPPING MACHINE MEURER CM SB60-B The Meurer CM/SB-B sleeve wrapping machine produces sleeve-wrapped packages, with or without lateral shrink wrapping. The film is stretched lengthwise, for which reason it fits any product to perfection. Manufacturer: Meurer Model: CM/SB60-B Year: 2010 Product dimensions min/max: Length 40-400mm; width 50-600mm; height: 40-350mm Sealing jaw width: 600mm Film reel diameter: 400mm Overall dimensions: Length 1,520mm; width 1,430mm; height 2,090-2,140mm. Performance: up to 50 cycles/min depending on product and film specifications 400/230V + N + PE. Power: 3kW (without side shrinking), 11kW (with side shrinking unit) Air connection: 6 Bar, 1/2" Sealing system: permanently heated sealing tool with sealing blade and electronic temperature control. Easy access due to an open construction. Quick, tool-less ...

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual