shr used for sale

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

Cutting sets and moving in snails Suitable for Stephan Machines

4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

Working Width: 450 mm Working Height: 220 mm

Working Width: 900 mm Working Height: 160 mm

32 solid single flails

With magnet

Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15580 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.

Working Width: 800 mm Working Height: 300 mm Main Motor Power: 250 KW

Working Width: 900 mm WorkinG Height: 240 mm

Hump Shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of Make: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: fast-running shredder shaft with counter comb Remark: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by arrangement. We are also happy to carry out tests with your material on request for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The  ...

Rochman Stainless shrink tunnel Model: TRX65 Serial: 2511004 Stainless shrink tunnel, stainless mesh belt, belt dimensions 1800mm x 650mm, max product height 400mm, variable speed, variable temperature, 3Ph

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.

Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.

NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 18,5 kW speed of the cutting drum : 112 rpm dimensions of the machine (l x w x h) : ± 2.950 x 1.600 x 1.780 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 7.000 kg/h for blocks of max. ± 810 x 650 x 350 mm number of knives: 7 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in Dolav boxes 3 x 400 V, 50Hz weight : 1.860 kg

PART NUMBER: 7649 Specifications: - inlet width 900mm - inlet height 300mm - shaft width 1030mm - shaft diameter 700mm - knife length 1030mm - number of knives 3pcs - sieve dimensions 70x70mm - 2 toothed pulling shafts at the bottom - lower shaft motor 7.5kW - 2 toothed pulling shafts from above - upper shaft motor 7.5kW - belt feeder - redler with chain belt 5600mm + 10600mm 2.2kW - width of the feeding belt 800mm - main motor 90kW - reverse gear - total dimensions of the machine length/width/height 3300x3100x1700mm - chipper base dimensions 3300x2080x1940mm - feeder / redler dimensions length/width/height 5600x900x1000mm + 10600x1050x1600mm - Base size for the feeding belt 5100x1300x2520mm - total weight about 16000kg ADVANTAGES – made in Germany – a chain conveyor of the redler type, equipped with scrapers – reverse gear – used chipper, very  ...

NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 9,2 / 11,5 kW speed of the cutting drum : 1st speed - 70 rpm / 2nd speed - 140 rpm dimensions of the machine (l x w x h) : ± 2.350 x 1.140 x 1.410 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 4.000 kg/h for blocks of max. ± 420 X 650 X 250 mm number of knives: 4 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in 200L eurobins 3 x 400 V, 50Hz weight : 980 kg

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1990 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 78 kW Rated current: 150 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press.  ...

NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.

Used tunnel with bulk wrapping machine and wrapper in shrink wrap.

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1996 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 162 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. T ...

Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Thank you for your interest in our used machines, which we can offer you as follows: Manufacturer: SME Group Model: FM 5540 shrink wrapping machine Built: 2010, hardly used Max Package Dimensions: 450x330x150mm Machinery Dimensions: 1685x828x1480mm Max welding dimensions 550x450x120mm Weight: 125kg Electrics: 1pH 110V/220V 50/60Hz, 2.5kw Foil: PVC, PP and POF We offer this machine " in existing condition " for sale, excluding any warranty/defect claims or assurances. from the hess. Lichtenau; Unpacked

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.

Input material Material: Wood from a carpentry workshop Description: Softwood, Particleboard, MDF Condition / Condition: loose Dimensions LxWxH: ≤ 500 x 200 x 50 mm Moisture content: ≤ 15% Metal Inclusions: No Inadmissible feed materials: ≥ 150 mm nails and ≥ 6 mm screws Loading type: manual Staple Removal of wood chips: on-site extraction Conditions Location: in a hall Ambient temperature: +5° to +40°C Humidity:

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph

Axtor 6010 Category: Universal Shredder Manufacturer: Komptech Serial / reference number: 249037 Hours: 4 620 Power: 433kW/589 hp Weight: approx. 25 000 kg Emission class: Tier 4 Final / Stage IV Equipment and description: Overbelt magnet Remote control Advance device Shredder, chipper blades or cantilever chairs Material: good for green waste, bark, logs, splinters and wood waste 2 drum speeds 460 / 810 rpm (modification for cantilever chairs) Drum width 1,543 mm / Drum diameter 1,108 mm / 32 tools, blades Filling height: 2,800 mm / Screen baskets: 60×60, 80×80, 100×100, 125×125 etc. possible / other sizes can be produced Throughput depending on material and operator between 100 and 300 m3/h / Feed hopper over 4 m long / noise emission: 122 dB (A) Transport Dimensions: Length: 11,700mm; Height: 3,750mm; Width: 2,500mm; Towing eye: 50mm

Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical  ...

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Two-shaft shredder Drive 37.50 kW

Stretch wrapping machine IMA model: MS300AM

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellow coupling, mechanical shrink disk -Manufacturer: Stuwe, mechanical shrink disks -Type: HSD 62-22x62 -Shaft: Ø 62 mm -Price: per piece -Number: 33 piece -Dimension: Ø 110 x 35 mm -Weight: 1.3 kg/piece

Angle sealer with shrink unit, vacuum packaging system, vacuum packaging machine, hood shrink machine, hood shrinker, film packaging machine -electronic temperature control -max. Pack size: 800 x 600 x 310 mm -Max. packaging weight: 18 kg -Dimensions: 1870/1010/H1200 mm -Weight: 212 kg