shr used for sale

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

Corrugated cardboard shredders (mats) Type: 55422118 Year of manufacture: 2018

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

Chopper Zeno Type: ZTLL 1150 x 1580 Year of Make: 1988 Rotor width 1150 mm Rotor diameter 380 mm Rotor speed 110 rpm. Hopper capacity approx. 5 m³ Capacity approx. 3 m³/h Hydraulic Moving Floor Both hydraulic cylinders for the moving floor were renewed in 2021. Motor 30 kW Weight approx. 3500 kg

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

GT-5290 Ripper - Brand: SCOINER - Model: 150/1300/100 - With horizontal hydraulic pusher and vertical hydraulic pusher - Rotor length: 1450 - Diameter: 500 - Engine: 100 hp (75 kw) - Dice: 30x30 - With hopper - With electric control - Year: 2000

Stock number: F722, In stock: Yes, Amount in stock: 1 pc., Item: Shrinking tunnel, Motor: 15.000 W heater, Product size: Max H 400 x W 650 mm., Outer dimensions: L 3150 x W 1100 x H 1750 mm., Manufacturer: Elwis, Type: 14-S-065, Other: Chain driven conveyor with span wire

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-1

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

COMAFER grinder model MAC 500: – hourly production from 100 to 200 kg/h – 10 HP, 380 volt motor – 965x500 mm inlet – overall dimensions 1.7 m x 1 x h=1.5 m – weight 800 kg – year 1997, in accordance with CE standards

BVM Compacta 5022 EGS Sleever + Inline BVM SC 4530 Heat shrink tunnel, Age 2014, Infeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of upto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 1, 2, 3 or 4 Stacks side by side, Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control, including 100 format-data storage locations, Technical Data:, Service side standard : left had side, Sealing length : 500 mm, Passing Height : 220 mm (standard), Belt width infeed/ outfeed conveyor : 400 mm, Speed : upto 120 cycles/ min , Length sealing : continuously working, Film width  ...

Code: 0307 Brand: COMAFER Model: MAC 300 - CE Standard Grinding machine for wood waste, plastic materials, cardboard, packaging, and other materials - CE Standard Technical data: Grinding inlet mm 680 x 500 Knife roller diameter mm 130 Knife roller lenght mm 450 N° 30 reversible sharpened knives Motor power Hp 5,5 Suction system diameter mm 150 Overall dimensions: mm 1300 x 900 x 1400 h Weight kg 600

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-44803-138

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-44803-56

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Chopper / universal / mill NAGEMA-FeumaProduct descriptionManufacturer: Nagema VEB Feuma GössnitzType: HU-1Year of construction: 1981Condition: used, baker's conditionOn wheels, mobileDetails see pictures.

Food processor / universal - food processor NAGEMA HU-1 Product description Manufacturer: Nagema VEB Feuma Gössnitz Type: HU-1 Year of construction: 1982 Condition: used, bakery condition On castors, mobile Details see pictures.

Kallfass Universa 8060 Spezial (1999) Type: Automatic L-sealer / shrink wrapping machine Format Max. product size: approx. 800 × 600 mm Max. height: approx. 200 ? 250 mm (depending on setup) Material Film type: polyolefin (PO), polyethylene (PE), PVC shrink film Film width: up to approx. 800 mm Performance Output: up to ~25?35 cycles/min (depending on product &, operator) Machine Data Year: 1999 Power supply: 400 V / 3-phase / 50 Hz Compressed air: required Machine type: semi-automatic or automatic (depending on configuration) Equipment / Features automatic or manual infeed (configuration dependent) L-sealing frame (angle sealer) integrated or inline shrink tunnel (optional/combined line) adjustable sealing time and temperature conveyor belt system film roll holder with easy loading electronic control panel safety guards and emergency stop quick format changeover suitable for single  ...

Shrink Wrapping machine Minipack Replay 55 Year 2004 Electrical power supply V 200/230 Phase ph 1 Maximum power installed kW 3.15 Hourly output pcs/h 0-300 Available dimensions of the sealing bars mm 540x390 MAX product size mm 500x380x200 MAX Reel Dimensions (diameter) mm 250 MAX Reel Strip Dimensions (width) mm 600 Work Surface Height mm 940 Machine dimensions with the lid open mm 1260x810x1400 Machine dimensions with the lid closed mm 1260x810x1190 Weight (Net/Gross) Kg 105/126

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

Welding frame dimensions: 560x430mm, max. product dimensions: 520x390x260mm, max. film width: 600mm, max. film roll diameter: 250mm, connected load: 3.7kW, an inspection is possible.

FELLOWES 225Ci document shredder, large stand-alone unit

Krones Variopac Pro FS 45 Type: Film only Output: 45 cycles/min. Year of Make: 2008

Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

friction wheel, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shrink disc, shaft-hub connection -Manufacturer: Ringspann, shrink disc: for crane chassis -Type: RLK 603 S-85x155 -Art.No.: 1048 1782 -Hole: Ø 85 mm -Quantity: 4 pieces available -Price: per piece -Dimensions: Ø 155 x 48 mm -Weight: 3.5 kg/piece

Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink  ...

Manufacturer: Cryovac Model: CJ62 LH-T Year of Manufacture: 2005 Power Supply: 13 kW / 400 V / 50 Hz / 19 A Certification: CE Find more here - / Contact us at -

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

Packing machine Minipack FM-75N Hood shrinking machine Minipack with base Connection 230 V Used machine

Machine in good condition, professionaly dismantled. 30 tacts/minute 1 row of packs Was working on 2l and 1,5 l water bottles 3x2 format

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

Shredder for waste wood and biomass, 2-stage ( stage 1 = Doppstadt DW 3060 buffalo ---- level 2 = AK 630 ), 2 large magnets INCLUDED, air classifier on the discharge belt included. Completely ready for use. Engine (Volvo approx. 700 hp / 515 KW

Brand: MACREAT Type: Heat sealer with shrink tunnel and conveyor Status: New Power supply: Electric Conveyor: Integrated motorized belt Order: Control panel with temperature and speed settings Auction-ID: A1-45418-15

The Komptech Crambo 5000 shredder is in working condition and was overhauled in 2009, with a new Mercedes-Benz engine fitted. The Mercedes-Benz V8 engine delivers 435 hp / 320 kW and has 2 turbochargers, making the machine more economical and powerful. The shredder is classified as mobile because it has a sled that can be easily moved or transported with a towing arm system. The number of operating hours of the engine is 3700 hours. The machine comes with documentation about the inspections and the history of the shredder. In addition, the schematics of all parts in the shredder and the manual of the motor are included. The shredder is equipped with a remote control. Auction-ID: A1-40133-7

TECHNICAL DATA: Hopper opening: 700 x 360 mm Installed power: 15 kW Rotor: 600 x Ø 252 mm

Overview This shrink-wrapper was manufactured in 2013 by the Italian company OCME S.p.A.. The Vega HT 60/2 SE is a versatile film packer designed for wrapping PET, glass, or can containers into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a running line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides for square bottles and an optional bottle divider. A semi-automatic roll-lifting robot for film roll changes is also included. Optional outfeed conveyors can be provided on request. Technical data  Formats: From 0.25 L to 2.5 L; currently 1.5 L in 2×(3×2) packs Container types: PET, glass, and cans Application: All beverages and liquid products Machine configuration ...

Scrap wood chippers, wood shredders, wood shredders, chippers, slow-speed moving floor chippers overhauled WEIMA Type: WL10 Year of Make: 1993 Rotor diameter 250 mm Motor power 22 KW Rotor length 98 cm Filling funnel approx. 120 x 100 cm Number of blades: 24 pcs. Knife size 30 x 30 mm Sieve 30 mm incl. 2nd sieve 40 mm Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2500 Kg Machine has been overhauled - Rotor shaft remounted. - Paintwork renewed - Sliding rails moving floor renewed - Oils changed - Rotor shaft overhauled (partly new blades and holders) Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the e ...