shr 25 used for sale

Functional until pick-up Note: The items offered are sold by us unchecked. No functional or technical tests have been carried out. Therefore, we cannot provide any information on function, completeness or technical condition. Traces of use and defects are possible. We expressly point out that a prior inspection of the items is strongly recommended in order to get an idea of the condition and scope of the goods offered. Auction-ID: A1-51029-83

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50796-71

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50796-403

8155/8180/KL60.8/KL70.8 \"Edge corrosion Minor damage to paintwork faded\" Auction-ID: A1-50849-471

Layout: Living room with kitchen Kitchen with an electric hob and sink Heat boiler for shower and kitchen Spacious shower with toilet Shower cabin Wash / rinse tray Mirror with lighting and storage space Air conditioning for heating and cooling Double-glazed windows and doors Luxaflex Wall insulation Floor insulation Outside connection for water, electricity and drainage Auction-ID: A1-47449-44

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50796-493

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50799-493

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50799-403

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-302

KL60.8/KL70.8KL55.8T/8155/8180/8145T \"Nameplate damaged paint faded edge corrosion Potential: blade bottom uneven up to 10mm \" Auction-ID: A1-50849-474

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50799-271

Bucket capacity 3.5 m³, KL60.8/KL70.8/KL55.8T/8155/8180/8145T Auction-ID: A1-50849-326

Layout: Living room with kitchen Kitchen with an electric hob and sink Heat boiler for shower and kitchen Spacious shower with toilet Shower cabin Wash / rinse tray Mirror with lighting and storage space Air conditioning for heating and cooling Double-glazed windows and doors Floor insulation Outside connection for water, electricity and drainage Wall insulation Auction-ID: A1-47449-43

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50796-492

KL60.8/KL70.8KL55.8T/8155/8180/8145T \"Nameplate illegible, edge corrosion, paint faded\" Auction-ID: A1-50849-477

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-402

KL60.8/KL70.8KL55.8T/8155/8180/8145T Nameplate not readable Minor damage Paint slightly faded Auction-ID: A1-50849-446

349, 5055, KL19.5, 5065, 650, 505 Used Auction-ID: A1-50849-628

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 6 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-23

This plywood sheet with dimensions 250 x 125 cm and a thickness of 9 mm is a sturdy and versatile choice for various applications. See photos for details. Auction-ID: A1-45120-2204

USED KITAMURA KNC 250YS CNC Lathe Main Spindle Bar Diameter: 42 mm Spindle Nose Type: A2-5 Spindle Power: 7.5 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Counter Spindle Spindle Power: 3.7 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Turret 1 Turret / 12 Stations with Rotating ToolsAxis strokes: X = 160 - Y = 70 - Z = 260 mm Equipped with 1 FANUC 18i-T CNC 1 Parts recuperator 1 Chip conveyor 1 Set of fixed and rotating tool holders 1 IEMCA BOSS 542 bar feeder Machine dimensions and weight : 3800x2000xH1800mm - weight 4000kg + 1 pallet 200kg Auction-ID: A1-50950-34

This plywood sheet with dimensions 250 x 125 cm and a thickness of 9 mm is a sturdy and versatile choice for various applications. See photos for details. Auction-ID: A1-45120-2205

258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-50866-601

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-50866-617

258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-50866-600

349, 5055, KL19.5, 5065, 650, 5051 Used Auction-ID: A1-50849-627

Softwood semi-circular post with a diameter of 80 mm and a length of 250 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45120-2223

USED FAMAR ERGO 250 CNC lathe Serial No.: 20.68 Year: 2001 Machinable part Diameter: 200mm Max. length on turret: 125 mm Max. tool block length: 200 mm Axles Axis strokes: X: 340 - Z: 215 mm Fast feeds: X: 60 - Z: 30 m/min Ball screw diameter: 40 mm Spindle Spindle nose: 6\" Spindle power S6: 30 kW Speed: 6000 rpm Max centering diameter: 350 mm Equipped with 1 CN SIEMENS SINUMERIK 1 Chip conveyor Dimensions and weight Machine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

Azobé hardwood post, FAS-classified and pointed, with an dim. of 250x6x6 cm each. Azobé is very strong and has a lifespan of about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. Auction-ID: A1-45120-2114

Equitone Linea facade panels made of fiber cement with a size of 2500 × 1220 × 10mm. The panels have a linear relief surface (Linea profile) and are suitable for use as ventilated façade cladding. The façade panels are made of through-and-through coloured fibre cement and are characterised by a groove structure over the entire length of the panel. Auction-ID: A1-45120-2181

Azobé is very strong and has durability class 1 and lasts about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. FAS quality Auction-ID: A1-45120-2116

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-50866-616

approximately 520 pieces of chipboard 1250 x 2500 x 18mm; Lot is loaded for free with a forklift Auction-ID: A1-41460-32

Azobé hardwood post, FAS-classified and pointed, with an dim. of 250x7x7 cm each. Azobé is very strong and has a lifespan of about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. Auction-ID: A1-45120-2115

worktop; key set; unused in packaging; 4447; Auction-ID: A1-50866-598

worktop; key set; unused in packaging; 4447; Auction-ID: A1-50866-599

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 4 sets of intermediate trusses IPE 220/200; 2 sets of end trusses IPE 200/180 with wind posts; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-9

The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle., A detailed technical breakdown of the machines specifications and functional systems is outlined below., ---------------------------------------------------------------, Technical Specifications, - Production Capacity: Up to 2,500 kg/h of finished butter output., - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content., - Sour Cream: 38% to 42% fat content., - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height)., - Total Machine Weight: Approx. 3,100 kg., - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external ...

2500Watt continuous, 5000Watt surge Auction-ID: A1-50903-26

230watt, 250Watt, including 1x Dometic DSP212 12/230volt inverter Auction-ID: A1-50903-29

230watt, 250Watt, including 1x Dometic DSP212 12/230volt inverter Auction-ID: A1-50903-28

- Cutting length 2500 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-608

General Description Mechanical stamping press manufactured by ILR , designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operatin ...

304 stainless steel tank vertical on feet 250 hL This 304 stainless steel storage tank with a capacity of 250 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and its coil radiator thermoregulation system, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical on legs Volume: 250 HL Material: stainless steel 304 Roof Central chimney with hatch 2 lifting rings Ferrule 1 ladder support bar 1 taster tap 1 full level tube 1 partial drain valve on square flange1 ractangular door external opening on the bottom of the ferrule 1 coil radiator Conical bottom 1 total drain valve on square flange 5 feet stainless steel Dimensions Diameter: 2800 mm Total height: 500 ...

250 hL Insulated Fiberglass Tank on Skirt This insulated fiberglass tank with a capacity of 250 hL is designed for the storage of liquids in industrial environments. Its configuration, combined with a closed vertical cylindrical tank, a flat bottom on a skirt and simple withdrawal and control equipment, makes it a robust and immediately usable second-hand solution to complement an existing storage capacity. Technical characteristics Vertical cylindrical tank Material: fibreglass Total capacity: 25,000 litres Roof Central chimney Shell Thermometer 1 taster valve 2 partial drain valves on flange 120×120 mm 1 total drain valve on flange 120×120 mm 1 rectangular door 1 tank with a level support strip 2 tanks without a level support strip Flat bottom on skirt Dimensions Diameter: 2600 mm Height: 6500 mm Equipment sold loaded on truck: disassembly and loading are carried out by ...

Mitsubishi L200 Double Cab Pickup Registration date: 18.05.2011 2.5L DI-D Common Rail Diesel Engine Displacement: 2,477 cm³ Power: 94 kW 5-speed manual transmission Mileage: 259,942 km (according to speedometer) Trailer hitch mounted Stainless steel front bar Stainless steel side skirts Loading area cover with gas pressure dampers Roof rails on the loading area cover Cargo compartment lined with protective tray Divider mounted behind the front seats Front power windows Radio retrofitted Airbag driver Service booklet available (partly kept) Engine compartment with signs of wear according to its age Frame with superficial rust, age-appropriate Body with signs of wear due to age and mileage Damage to the front right (fender/bumper damaged) Various scratches, dirt and minor signs of use all around Seat covers and interior with normal signs of wear V ...

Yale Veracitor 25VX LPG forklift with 2,500 kg lift capacity, triplex mast, side shift and enclosed cab. Solid, powerful forklift that functions well technically and can be used immediately. Ideal for warehouse, workshop, construction, trade or industry. Key features Brand: Yale Model: Veracitor 25VX Year of construction: 2007 Fuel: LPG Lifting capacity: 2,500 kg Lifting height: 4,900 mm Plywood mast Sideshift Enclosed cab with doors Front and rear lighting Flashing light Operating hours: 12,763 hours Own weight: approx. 4,540 kg LPG bottle included State The forklift starts, drives and lifts as it should. Mast and hydraulics function correctly. Normal signs of use appropriate to the age of the machine. Auction-ID: A3-46142-11271

Perfect PFG2550 Surface Grinding Machine Type: Surface grinding machine Manufacturer: Perfect Model: PFG2550 Year of manufacture: 1997 Table size: 500 x 250 mm Stroke: 550 x 270 mm Approx. machine weight: 1250 kg Approx. dimensions (L x W x H): 1500 x 1200 x 1300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-24

\" WEEKE Optimat BHC 250 CNC Processing Centre Manufacturer: WEEKE Bohrsysteme GmbH / HOMAG Group Model: Optimat BHC 250 Machine type: CNC Processing / Machining Centre Year: 2004 Serial number: 0-250-04-2244 Quantity: 1 machine CNC machining centre designed for drilling, routing/milling and grooving of wood and wood-based panel materials. Equipped with movable vacuum consoles, vacuum workpiece clamping, integrated drilling/routing equipment and original WEEKE PC/CNC control system. Technical specifications: Connected load: 15 kW Electrical supply: 400 V, 50 Hz, 3+N Rated current: 35 A Control voltage: 24 V Working length: Approx. 2,750 mm configuration X-axis travel: Approx. 3,185 mm Y-axis travel: Approx. 1,080 mm Z-axis travel: 135 mm Pneumatic requirement: 7 bar Equipment / features: CNC drilling and routing/milling Integrated machining head Movable  ...

304 stainless steel tank vertical on feet 250 hL This 304 stainless steel storage tank with a capacity of 250 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and its coil radiator thermoregulation system, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical on legs Volume: 250 HL Material: stainless steel 304 Roof Central chimney with hatch 2 lifting rings Ferrule 1 ladder support bar 1 taster tap 1 full level tube 1 partial drain valve on square flange1 ractangular door external opening on the bottom of the ferrule 1 coil radiator Conical bottom 1 total drain valve on square flange 5 feet stainless steel Dimensions Diameter: 2800 mm Total height: 500 ...