shr 25 used for sale

built-in; all-round overlap (flap) of 11 cm; system is well suited for most industrial and commercial buildings and can provide both daily ventilation and smoke extraction; total approx. 1 full curtain-sided trailer Auction-ID: A1-41994-108

Extra options : Fully closed cab , LED lighting all around , Blue spot , fingertip control , beacon Auction-ID: A1-43890-6

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-43890-9

Extra options: LED lighting front and rear, Blue spot, Spoon adjuster, electric handbrake, Auction-ID: A1-43890-5

Technical Specifications Approximate weight: 145 Kg Accessories: Tailstock Notes: Maximum load allowed with tailstock 250 Kg; Maximum load allowed horizontally 250 Kg; Maximum load allowed vertically 125 Kg Item sold in unverified status Auction-ID: A1-44614-13

SKF - Batch of refurbished bearings Auction-ID: A1-46070-246

FAG, TIMKEN, SKF - Batch of various bearings 256KG Auction-ID: A1-46070-282

SKF / FAG - Batch of industrial bearings, bearing housings and components 257KG Auction-ID: A1-46070-181

Beckhoff - AM8131-0F20-0000/PLE - Batch Servo Motors 25x Auction-ID: A1-46070-27

Auction-ID: A1-46315-38

SKF - Batch of drive components and axles 257KG Auction-ID: A1-46070-143

258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-45902-601

\" Semi-automatic hacksaw, type OH 253 – Solid industrial hacksaw – Semi-automatic saw feeder – Vise with manual clamping– Coolant device – Control panel with speed selection (1500 / 3000 rpm) – Emergency stop – Stable cast/steel construction – Including operating instructions & maintenance documents – Max. round material (90°): approx. 280 mm – Max. rectangular material: 250 × 250 mm – Saw blade: 450 × 40 × 2 mm – Cutting speeds: 6 stages – Main motor: 1.5 / 2.2 kW – Cooling motor: 0.18 kW – Dimensions (approx.): 1790 × 760 × 1020 mm (L × W × H) – Weight: approx. 570 kg \" Auction-ID: A7-46417-146

Dimensions LxWxH: 1050 x 550 x 1050 mm Auction-ID: A7-45992-118

Column-mounted slewing crane 2,500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: ZSD 2500-6/4,5 Year of construction: 2006 Factory no.: 049/06 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 2,500 kg. The system is equipped with an electric chain hoist from the Demag brand. The stroke is carried out electrically via a Demag electric chain hoist type DKUN 16-1250 with two speeds (fine stroke / fast stroke). The chain hoist moves back and forth electrically on the boom (trolley ride). The swinging movement of the boom is electric. Operation via pendant switch control with emergency stop. System consisting of column, boom, swivel drive and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m Electric chain hoist Demag electric trolley travel Electric slewing mechanism Pendant switch control A test book for t ...

258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-45902-600

worktop; key set; unused in packaging; 4447; Auction-ID: A1-45902-598

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45902-616

\" Electric chain hoist 125 / 250 kg Manufacturer / Model: LIFTKET – Hoffmann Fördertechnik GmbH Wurzen Type: KLORW 63GV8-2 Condition: Used, functional Electric chain hoist LIFTKET from German production. The chain hoist is equipped with a control bottle and has fine travel. The sale is without a crane system, only the chain hoist is offered. • Load capacity: 125 / 250 kg • Hook height: approx. 2.65 m • Manufacturer: Hoffmann Fördertechnik GmbH Wurzen (LIFTKET) • Type: KLORW 63GV8-2 • Year of construction: 2010 • Power connection: 400 V / 3 phases • Control: pendant switch • Lifting speed: with fine stroke \" Auction-ID: A7-46417-377

\" 3-point internal measuring screw Measuring range: 225–250 mm Version: analogue Manufacturer: not clearly marked Accessories: Adjustment ring Ø 250 mm (marking \"250 C\"), original case, instructions, adjustment tool (screwdriver) 3-point internal measuring screw for the measuring range 225–250 mm including matching adjustment ring Ø 250 mm. The measuring device is located in the original case with foam insert. An operating manual for three-point internal measuring screws (analogue/digital) is included. Condition: Used. Visually good condition with slight signs of wear. Calibration sticker available, but no current calibration documented. Functional test not carried out. • 3-point internal measuring screw 225–250 mm • Adjustment ring Ø 250 mm • Original case • Instructions \" Auction-ID: A7-46417-121

\" 3-point internal measuring device / three-point internal measuring screw Manufacturer: Hogetex Measuring range: 250–275 mm (marking on the measuring device) Accessories: Setting ring Ø 237.503 mm, original wooden boxes, dimensional test documents Hogetex 3-point internal measuring device for the measuring range 250–275 mm. The set includes the matching adjustment ring Ø 237.503 mm. Gauge and adjustment ring are each supplied in the original wooden box. There is a dimensional check for the adjustment ring: nominal dimension 237.503 mm, actual dimension 237.505 mm (document available). Test sticker available on the adjustment ring. Condition: Used. Gauge and adjustment ring in good, well-maintained condition with slight signs of use. wooden boxes clearly used. No current, traceable calibration. Scope of delivery: • Hogetex 3-point internal measuring device, range 250–275 mm ...

worktop; key set; unused in packaging; 4447; Auction-ID: A1-45902-599

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45902-617

\" Face lathe WEMA Zerbst DP2 – Ø 1,250 mm – 2 supports – with 3-jaw chuck Face lathe WEMA Zerbst, type DP2, in heavy industrial design. The machine is equipped with a face plate Ø 1,250 mm and has 2 supports, which also allows parallel machining. A 3-jaw chuck is installed, and interchangeable jaws are also available. Condition: • Used • Ready to demonstrate • Age-related signs of wear Scope of delivery: • Machine complete • Control cabinet • Circuit diagrams • Interchangeable jaws • Manufacturer: WEMA Zerbst • Type: DP2 • Year of construction: 1980 • Face plate: Ø 1,250 mm • Voltage: 380 V • Control: conventional • Feed + rapid traverse available • Documentation: Electrical circuit diagrams available • 2 supports • 3-jaw chuck mounted • Interchangeable jaws • Heavy face disc plate • 2 control panels / control areas • Control cabine ...

- Producer Cefla - Type TN 2250 - Length 2.250 mm - Belt with 1.360 mm - Overall width 1.600 mm - Year of construction 2008 - FU-Regelung für Feed speed - Feed speed ~ 2 - 8 m/min - frequency converter on site - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Commodity code 8428330 - Weight 270 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-539

According to photos, weight estimated Auction-ID: A1-45666-9

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-530

In stock on pallet, total dimensions approx. 1200x800x1115 mm Auction-ID: A1-45790-500

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-538

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-531

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-59

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-537

GMC C2500 High Sierra 25 – Built in 1975 • Model: GMC C2500 High Sierra 25 • Registration date: 31.12.1975 • Engine: 7.4 liter V8 big block gasoline • Standard power: 180 kW / 245 hp • Power output after conversion: 257 kW / approx. 350 hp • Automatic transmission • Rear-wheel drive • H license plate (classic car registration) • Vehicle Type: Truck Open Box • High Sierra Amenities • Engine, drive & electrics overhauled (2022) • Stainless steel exhaust system • Tyres: 33×12.5 R16.5 LT • Towing capacity: approx. 2,700 kg • Distinctive US pickup of the C/K series (3/4-ton) • Classic American V8 sound • Collector's vehicle with value appreciation potential Auction-ID: 048-XF3-5

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-536

Length 300 cm; with non-slip profile; and 35 pieces Douglas fence boards 15x150 mm; length 240 cm Auction-ID: A1-46266-500

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-3

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-529

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-17

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-21

Lot consisting of waste container - container with hook - dumpster 25m3 nr W1 Auction-ID: A3-43525-17001

Table saw with base frame Saw blade diameter 255 mm Saw blade swivel 45 ° Cutting height 75 mm Table size 640 x 920 mm (extended) Saw blade bore 30 mm Motor power 1.6 kW Connection voltage 230 V Machine weight approx. 32 kg Dimensions (length/width/height) 720 x 1080 x 920 mm Condition: never used / new (5) Auction-ID: A7-46460-467

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3441

Demonstration machine Speed in 6 steps 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Rotating bezel. 4-fold steel holder. Scout tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left/right shift. Set of interchangeable wheels. Related tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.135 t Space requirement approx. 1.25 x 0.6 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46460-428

Lot consisting of waste container - container with hook - dumpster 25m3 nr W2 Auction-ID: A3-43525-17002

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/SCYIV8v2q1Y - Former Still full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 2/2020 24V C5 300Ah, good performance measured with 24.5V Auction-ID: A1-45451-350

TRAUB automatic multi-spindle CNC lathe line equipped with ACTRA-25T control. Includes BECHET (France) bar feeder, serial number 148. Equipped with chip conveyor and automatic parts evacuation system. Fully automated loading and unloading system. Machine with closed protection cabin. Configuration oriented to high-cadence mass production. Suitable for machining small and medium-sized parts. Control panel with manual controls and CNC control. Source of the feeder: Cluses, Haute-Savoie (France). It is sold as a complete line consisting of lathe, bar feeder and evacuation system. Auction-ID: A7-46053-3

Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5) Auction-ID: A7-46460-408

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New Auction-ID: A7-46460-421