shr 25 used for sale

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar

Fristam pumps type FP 752/250 VA, power 22 kW pressure version. Pumping height 130 m, capacity 15,000 litres. Double shaft seal. Year 2012

I sell a stacking / destacking system MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of construction 2011. Stacking system One-sided steering / also suitable for pallets. Vacuum system (with pump) Rotazion head Automatic charging. Entrance table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Entry of feeding roller stazion for stilted material. Security fence fully complete ! Working capacity Approx. 16 cycles / min Plate height 10 - 50mm Min. plate dimensions 250 x 320 mm plate dimensions 1300 x 3000 mm Combined area L.10200mm x W.8700mm Combined power 45kW Year of construction 2011 Available the same. Ready for use, possible to check. With CE certificate and full document.

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

Pester PEWO-pack 250 stretchwrapper for folding cartons, etc., 90 degree infeed conveyor with a total length of approx. 2000 mm, format range cartons min. 30 x 15 x 60 mm (a x b x h), max. 150 x 90 x 180 mm (a x b x h), format range collation/bundle min. 60 x 30 x 60 mm (LxWxH), max. 400 x 180 x 250 mm (LxWxH), suitable for PE-foil with a foil width from 50 to 250 mm and a foil thickness from 0.025 to 0.1 mm, reel diameter of the foil max. 300 mm, electrics 3 x 400 V+N+PE 50 Hz, power consumption 2.7 kW / 4 A, fuse protection 16 A, air consumption 6 norm litres per stroke, operating pressure 5 bar, pneumatic connection 1/2 ", pneumatic pressure min. 5 bar up to max. 10 bar, capacity up to 30 collations/bundles per minute

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 250 d Status: Demo Warranty: 12 months Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

Offset downforce, VNK2A 251, 6-49Nm, Bosch Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800633 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...

Aluminium format slide (anodized) with hardened Steel guide rods. Non-return protection at thickness planer. Anodized parallel fence with micrometric fine adjustment. Inclined adjustment of the saw blade up to 45° by means of a hand wheel. Table opening ø190 mm with undercounter extraction. Milling stop 180 mm. Built-in milling spindle lock. Layout table with telescopic stop, Eccentric clamp, degree grid made in EU ! Dressing unit: Table width 410 mm Table length 1800 mm Planer shaft diameter 100 mm Number of planing knives 4 pieces Shaft speed 5000 Motor output power 5 kW S6 400V (4kW S1) Thickness unit: Thickness passage, min/max 4 - 230 mm Feed speed 7m/min Milling machine: Usable length of the spindle 125 mm Spindle height adjustment 160 mm tool diameter for profiling 180 mm for tenon cutting 250 mm Spindle speed 8000/6000/3500/1400 Table openings 1 ...

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Technical data: -Drilling capacity in steel ST 60 25 mm -Spindle mount MT 3 8 spindle speed 100 2700 RPM - spindle stroke 130 mm -4 feeds 0.1-0.3 m / U -RADIUS 270 mm -Column diameter 115 mm -Boring Unit + table height adjustable with hand crank on rack -Table dimensions 350 mm -Drive: 400 V / 0.8 / 1.1 kW -Space requirement approx. B H 800 x 1850 X 900 mm -Weight approx. 250 kg

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available

CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Key data: 200 , 250 , 400

Emergency power system NSA as a backup power system with a nominal output of 250 kVA with FPT Iveco engine C 87 TE 3 F, parallel to the grid with IG 200 Engine manufacturer: Iveco FPT Engine Model: C 87 TE 3 F Engine No.: 457199 Engine power: 262 KW Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 or diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCDI 274 K Gene. Item no.: C22G293710 Generator power: 250 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 3 poles Delivery: Assembled Tank: Base frame tank with drip pan Capacity / litre: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...

Ex flow sensor, SS 20.600, Ausführung 250mm, Schmidt, mint condition -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 1.840. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. Flow sensor With factory calibration (no accredited calibration) - Type SS 20.600 Mechanical version 250 mm - Through-bolt joint Pressure density DGV - Stainless steel G1/2 Measuring range 0 ... 20 m/s - Calibration Standard calibration Pulse output - Standard 100 Hz, Further outputs, Without communication modules - Explosion protection without application range - For ...

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

ORDER NO. 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max disc diameter 400mm - disc bore diameter 80mm - max cutting height 140mm - table top width with clearance 730mm - tabletop length 2130mm in advance: -Triggers - pressure shaft, sliding roller -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shaft 4 pcs From below: - Slip shaft, smooth -Triggers -caterpillar Feeding table + guide rail - roll width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm Take-up table - pulling rollers 8 pcs - roll width 800mm - total dimensions length/width/height 4400x980x880mm - Central lubrication - electric lifting of the body up/down 0.55kW - electric shaft adjustment with 0.55kW saws - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1k ...

SOUND TOP ENERGY 250 – COSTAN Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and tested. NOT REFURBISHED Latest generation products, LED lighting and years of production 2016 – 2017-2018 Dimensions: (additional dimensions can be found in the details of the images) Length: 250cm Depth: 75cm Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas LED Lighting Plug-ins Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 780Lt Each product is tested to guarantee the perfect operation. NOT REFURBISHED.

Key data: 600 , 132 , 35

Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment

Key data: 800 , 132 , 35

Manufacturer/Manufacturer: Arburg Typ/Type: 370C 800-250 Bau-year year: 2003 Control/Controller: Selogica Clothing kraft/Clamping Force: 800 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 34 mm Lifting volume/shot volume: 144 cc/132 gram hp Spez. Spray./injection pressure: 1820 bar General General Motor/Motor Power: 15 kW Heating/heating power: 8.6 kW Dimensions: 4.2 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap

TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...

Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.

Two used ABB BBC turbochargers ABB VTR 254-11 HT:398345 HT:398344 Turbochargers still need to be tested and assembled ! Both turbochargers are disassembled on request I send them photos !

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty

Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

ID3182 2 piece Strödter Vigomat VP 250-2,5 year/Year of construction 2013 articulated manipulators, pneumatic power supply Load capacity 240 kg Max. Max. load torque on load handling attachment 1200 Nm Max. Horizontal working range: Radius R 3.7 m Max. Stroke: 1.45 m Max. Max. lifting speed: 0.8 m/s Type of attachment Pedestal Weight of device 755 kg Noise emission < 70dB Pneumatic working pressure 6 bar Max. Air consumption: max 40 NI /double stroke Diameter of main cylinder 200 mm Buckling manipulators, power supply pneumatic Load capacity 240 kg Max. load torque at the noise pick-up device 1200Nm Max. horizontal working range: Radius R 3.7 m Max. stroke: 1.45 m Max. lifting speed: 0.8 m/s Fastening type of pedestal Weight of the device 755 kg Noise level < 70dB Pneumatic working pressure 6 bar Max. air consumption: max 40 NI /double stroke Diameter master ...

Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Key data: 200 KW, 250 kVA

ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

BEYELER PR6 ROBOT 60 X 2550 MM CNC press brake was built in 2001 in Germany. This extremely powerful and reliable machine is used for precision bending of workpieces with a maximum length of 2550 mm. The sturdy construction in combination with a press force of 60 tonnes and a perfectly optimised CNC control makes the machine ideal for a wide variety of applications in unit and series production. The BEYELER PR6 Robot press brake weighs 7200 kg. Technical specifications of the BEYELER PR6 ROBOT 60 X 2550 MM press brake - CNC control - press force: 60 t (600 kN) - maximum bending length: 2550 mm - bending speed: 1-10 mm/s - return speed: 200 mm/s - slider stroke: 265 mm - maximum response time: 110 ms - minimum safety distance: 350 mm - motor power: 5.5 kW - maximum air pressure: 8 bar - power supply: 3x 400 V; 50 Hz - dimensions (L x W x H): 3000 x 2100 x 2700 mm - weight  ...

Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500

Motor control card Bendingroller for TBA / 8 ASU