shr 25 used for sale

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock

Tractive effort: to 25 Length: 2000 mm Room set: 3 piece

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 3,23 t dimensions of the machine ca.: 3200 x 2300 x 1350 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13 total power requirement: 15 kW weight of the machine ca.: 8,84 t dimensions of the machine ca.: 4760 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Lock valve vacuum pump E250 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: E250 Engine rated power: 5.5KW nominal suction digesters: 290m3/h Final pressure without gasb.: 4x10e-2 Zubehoer: Operating instructions with spare parts list Delivery: short-term

MDDK 1000 1250.250

The offer refers to the whole team. The MAN is as good as new and has only run 2093 kilometres. Net price: € 110.000,00. Manufacturer: MAN Model: TGL 8.250 Vehicle type: Truck box / suction-pressure vehicle Chassis number: WMAN12ZZ3LY404807 First registration: 07.04.2021 Next general inspection: 04.22 Mileage: 2,093 Displacement: 6,871 cc KW / HP: 184 / 250 Drive type: Diesel Euro6c Transmission type: Automatic Empty weight: 5,260 kg Permissible total weight: 7,490 kg Dimensions H / W / L: 3.35 m / 2.55 m / 6.15 m Equipment: Roller shutter / side doors / trailer hitch Maul / Air conditioning / navigation The offer refers to the whole team. The MAN is as good as new and has only run 2093 kilometres. The tank trailer has a capacity of approx. 10,500 litres with 3 chambers and is approved according to GGVSEB/ADR Class 3, packaging group III, tank coding LGBF and  ...

The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.

The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use

The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Waelz piston pump (roots blow- Status: Generalueberholt Manufacturer: Leybold Typ: WSU 251 Gewaehrleitung: 12 months Zubehoer: User manual; Spare parts list; Oil filling delivery time: from stock; ready for use

Plywood Press, manufactured by Siempelkamp, working sizes 2500 x 1300, 10 floors

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.

The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...

We offer you here a new / used Collision guardrail for purchase. Included in delivery are: 01x Collision protection guardrail, new/ used Material colour: yellow/ black/ galvanised Total height: 400 mm Total depth: 180 mm Clear width: 2,500 mm Consisting of: 01x CS Sigma profile, used Material color: sendzimir galvanized Length: 2,400 mm 02x L - Collision protection corners, new Material colour: yellow/ black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/pcs.: 6,10 kg 08x Screws: M12 08x Nuts: M12 16x U-discs: M12 The collision protection guardrail becomes compl. delivered pre-assembled. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the ...

Rotary vane vacuum pump incirculation lubricated: Busch Type: R5 RA 250D Status: Pre-performance Performance: 12 months Cleaner: Mineraloile Supply: Intake filter Delivery time: from stock; ready for use

Numer katalogowy 6349 DANE TECHNICZNE - max szerokość obrabianego elementu 250mm - max wysokość obrabianego elementu 110mm 2 agregaty szlifujące: górny i dolny z góry: - 2 rolki dociskowe poślizgowe - agregat szlifujący 2 walce metalowe + trzewik - rolka dociskowa poślizgowa - taśma gumowa ciągnąca – VACUM z dołu: - taśma ciągnąca - 2 rolki poślizgowe, metalowe - agregat szlifujący 2 walce metalowe + trzewik - 3 rolki wyprowadzające ciągnące, metalowe - czyszczenie papieru przy agregacie górnym i dolnym - elektrycznie ustawiana wysokości szlifowania - oscylacja taśm szlifujących - płynna regulacja prędkości posuwu na falowniku - silniki główne 2×5,5kW - zapotrzebowanie powietrza 8bar - średnica króćców odciągu 4x100mm - wymiary całkowite dł/szer/wys 1400x1200x1850/2250mm - waga 1490kg – do krótkich ele ...

various knife head fraesers / plan fraesers 200, 215 250 mm

FOR SALE... NEW ORIGINAL ABB VTR 254 BEARINGS 34100-32100 SETS AT TURKEY... TO WHOM IT MAY CONCERN; --WE VE NEW UNUSED ORIGINAL 11 SETS ABB VTR 254 BEARINGS 34100 & 34200 AT OUR STOCK. --BESIDES WE VE 9 SETS SPARE PARTS HZTL 431301R1 AT OUR STOCK AT SPECIAL WOODEN BOXES. PLS FIND DETAILED LIST ON PICTURES ALL PARTS READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Rotary vane vacuum pump packing Manufacturer: Busch Type: 251-512 Status: used, tested! Including: oil filling Delivery time: In stock!; ready for operation

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R2PTAW Generator power 2500 kVA Generator Mecc Alte ECO46-1.5 L CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,300 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

--> Grinding blades in the opposite direction. Suitable--> mill for the processing of spices. 2 drives: 15 KW + 7.5 KW.

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity

Elbow 45° AGRU 250 SDR 17

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

I sell a stacking / destacking system MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of construction 2011. Stacking system One-sided steering / also suitable for pallets. Vacuum system (with pump) Rotazion head Automatic charging. Entrance table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Entry of feeding roller stazion for stilted material. Security fence fully complete ! Working capacity Approx. 16 cycles / min Plate height 10 - 50mm Min. plate dimensions 250 x 320 mm plate dimensions 1300 x 3000 mm Combined area L.10200mm x W.8700mm Combined power 45kW Year of construction 2011 Available the same. Ready for use, possible to check. With CE certificate and full document.

Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar

Fristam pumps type FP 752/250 VA, power 22 kW pressure version. Pumping height 130 m, capacity 15,000 litres. Double shaft seal. Year 2012

Pester PEWO-pack 250 stretchwrapper for folding cartons, etc., 90 degree infeed conveyor with a total length of approx. 2000 mm, format range cartons min. 30 x 15 x 60 mm (a x b x h), max. 150 x 90 x 180 mm (a x b x h), format range collation/bundle min. 60 x 30 x 60 mm (LxWxH), max. 400 x 180 x 250 mm (LxWxH), suitable for PE-foil with a foil width from 50 to 250 mm and a foil thickness from 0.025 to 0.1 mm, reel diameter of the foil max. 300 mm, electrics 3 x 400 V+N+PE 50 Hz, power consumption 2.7 kW / 4 A, fuse protection 16 A, air consumption 6 norm litres per stroke, operating pressure 5 bar, pneumatic connection 1/2 ", pneumatic pressure min. 5 bar up to max. 10 bar, capacity up to 30 collations/bundles per minute

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

Mixer 250 liters double shaft with paddles - brand new! The machine has 2 motor-reducers reverse ×1.1 kw or a total power of 2.2 kw. Main characteristics: Designed for homogeneous mixing of food products; Made entirely of stainless steel; Completely silent mixing process; Two working augers with paddles; 2 new front unloading flaps; Easy cleaning of the machine; Built-in two silent motor-reducers of the highest class; Safety cover with limit switch; Built-in electric part with moisture-proof buttons; Reversible mixing system in both directions; Capacity: 250 l.; Installation power 2.2KW, 400V, 50Hz;

Tumbler IGLU 250 in good used and functional condition. Completely made of stainless steel, 250 litre drum, vacuum, rollable, analog control. Dimensions W/D/H 95/150/180 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 250 d Status: Demo Warranty: 12 months Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

Offset downforce, VNK2A 251, 6-49Nm, Bosch Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800633 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...

Aluminium format slide (anodized) with hardened Steel guide rods. Non-return protection at thickness planer. Anodized parallel fence with micrometric fine adjustment. Inclined adjustment of the saw blade up to 45° by means of a hand wheel. Table opening ø190 mm with undercounter extraction. Milling stop 180 mm. Built-in milling spindle lock. Layout table with telescopic stop, Eccentric clamp, degree grid made in EU ! Dressing unit: Table width 410 mm Table length 1800 mm Planer shaft diameter 100 mm Number of planing knives 4 pieces Shaft speed 5000 Motor output power 5 kW S6 400V (4kW S1) Thickness unit: Thickness passage, min/max 4 - 230 mm Feed speed 7m/min Milling machine: Usable length of the spindle 125 mm Spindle height adjustment 160 mm tool diameter for profiling 180 mm for tenon cutting 250 mm Spindle speed 8000/6000/3500/1400 Table openings 1 ...

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-