shr 25 used for sale

General SKU432X1357 LocationBarneveld MakeGlatt AG Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying oven(Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trays24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck With jacketcheck Drying ovens Tray sizes500 x 800 x 30 Specified Features - Drying oven MaterialStainless steel 1.4301 (304) General TypeGHT-U-250 Machine number101.145 Year of construction1993 With switchgear(as is) Floorspace1,1 x 1,8 m Total  ...

This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of +50 / -50 mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details.

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Key data: 250 t, 800 mm, 650 mm

LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details.

Key data: 250 t, 4000 mm

Inv. Num. : 9155 Type: HOL-250/4000 Producer: TOMÁŠEK Created: 2015 Parameters: Compressive force: 250 t Maximum bending length: 4000 mm Distance between frame walls: 3420 mm Maximum stroke: 250 mm Machine height: 2950 mm Machine length: 4040 mm Machine width: 1850 mm Machine weight: 18650 kg Equipment: 1 upper and 2 lower tools The machine has been completely overhauled: New hydraulics New Mitsubishi control unit Controlled bending

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

Croissant Maker Delloro F 253 Year of Make: 2017 Croissant Maker F-253: Free-standing device, mobile Adjustable roller system: allows different dough thicknesses Production of croissants, croissants, croissants in various sizes Capacity: 800 dough pieces/hour Ideal in combination with a cutting table or sheeter External dimensions (LxWxH): 76 x 40 x 100 cm

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

General SKU327X682 MakeDe Dietrich TypeAE 250 No.69197 Year of construction2008 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 750 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN25 with valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm MaterialGlass - Enamel (3009U) General LocationBarneveld Floorspace1,00 x 1,00 m Total height3,00 m Weight820 kg CEcheck Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C.Conformity per Directive 97/23/EC (PED), Mod ...

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

x-travel: 1550 mm y-travel: 400 mm z-travel: 500 mm table-size: 1850 x 350 mm spindle taper ISO: Sk 50 spindle turning speed range: 40 - 1800 U/min quill stroke: mm total power requirement: 7,5 KW weight of the machine ca.: 2,8 t dimensions: 2,4 x 2,2 x 2,1 m Universal Milling Machine - 3-axis digital readout - Central lubrication system - Coolant system - Machine lamp - Machine leveling feet - Chip guard - Emergency stop device - Mobile workbench incl. tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 8000 kg -Load cell: 4x Tedea-Huntleigh 2000 kg -Quantity: 3 pieces available -Price: per piece -Dimensions: 2500/1250/H130 mm -Empty weight: 472 kg/unit

CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools

Inv. Num. : 9184 Type: HA 250 W Producer: AMADA Created: 2024 Parameters: Saw blade dimensions: 3505 x 34 x 1.1 mm Weight: 1500 kg

X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible.

Used AMS 250 active mixer by Mavet. New: 1999. It's designed for mixing powder mixtures with liquid additives up to 10% by volume, in exceptional cases up to 30%. The AMS mixer is ideal not only for the food industry, but also for the pharmaceutical industry. It consists of a mixing tank mounted on a stainless steel frame. A propeller agitator is located at the bottom and a mixing head is located on the side of the tank.

Used stainless steel mixer made by Kates, capacity: 250 L, new: 1999. Test pressure 0.45 MPa, working pressure 0.35 MPa, max. temperature 135°C.

Specifications Serial no: 503592/01—CAB14191 Year of manufacture 06-2005 Range: 6 meters Further description to follow as soon as possible. 07.2.230

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

VP-2500HP-CL32, year of manufacture 2017 64 CL feeder, 32 push feeder, 4 heads Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hacksaw, hacksaw machine, metal hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw, with coolant system and stop -Type: HBS 250/280 -Motor: 0.65/1.0 kW -Cutting speed: 2-stage / 16-32 m/min -Cutting width: 280 x 180 mm -Cutting range at 45 degrees: approximately 180 mm -Cutting area at 45 degrees: square 170 x 200 mm -Saw blade: Length 450 mm - Clamping stock: swivels 45° Machine dimensions: 1300/1100/H1090 mm -Transport dimensions: 1300/600/H1090 mm -Weight: 200 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Quantity: 2 hacksaws available -Price: per piece -Machine dimensions: 1300/640/H1115 mm -Weight: 338 kg

General SKU237S137 MakePignat (FR) LocationBarneveld CEcheck Type25 Ltr Main Features MaterialGlass Volume25 Ltr. Motor0.74 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity25 ltr. Vessel sizesdia. 290x500mm Dished bottomcheck Dished top sidecheck Outletdia. 15mm With jacketcheck Max. temperature150 degr. C With propellor stirrer(30-300 rpm, CW) With anchor stirrer(10-100 rpm, CCW) Motor2 x 0.37 kW 230/400 V With jacketcheck Glass Reactors MaterialGlass General No.20403081 Year of construction2004 Mounted on legscheck With switchgearcheck Floorspace1,0x0,8 M Total height1,8 M Weight200 Kg Extra Specifications- stirrers MoC SS 316LGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsGlass-lined ReactorsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes ...

General SKU349U858 MakeServolift LocationBarneveld CEcheck TypeHF 250 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unit(Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm MaterialStainless steel 1.4301 (304) With jacketcheck General No.10815 Year of construction2003 With switchcheck Floorspace0,65x0,67 m Total height4 m Weight650 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberLifting/tilting machinesAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesOrganicsPa ...

General SKU050A271 MakeD.O.S. Dutch Oven Systems Year of construction1995 LocationBarneveld Main Features MaterialMild steel Volume2500 Ltr. Specified Features - Drying oven Drying ovencheck Number of compartments:1 Capacity2500 Ltr. Internal width1050 mm Internal depth1450 mm Internal height1750 mm Gas heatingcheck Number of doors:1 With fancheck Motor2,2 KW MaterialMild steel General With switchgear(as is) Floorspace2,0 x 2,2 m Total height3,2 m Weight1500 kg CEcheck Extra Specifications- Burner make Weishaupt, type WG-10N/1A (10-42 KW)Consumer wastePaints & coatingsDrying ovensFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersOrganicsPaper & otherDiscountCosmeticsE-waste & metalDyes & pigmentsAPIPlastic & rubberMinerals & inorganicDutch Oven SystIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatings ...

General SKU361W981 MakeLauda LocationBarneveld CEcheck TypeITH250/12KW Pressure Working pressure10 Bar Main Features Heating (medium)Electric Capacity15 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Marlotherm LH Heating capacity12 kW, 400V Electric capacity15 kW, 400 volt Temperature-15/+200°C Tank capacity30 l. With pumpcheck With temperature controllercheck With controlcheck MaterialStainless steel 1.4571 (316Ti) General No.HKS15167 Mach.No.HKS15167 Year of construction2015 With switchgearcheck Floorspace0,64 x 1,1 m Total height1,78 m Weight360 kg Extra SpecificationsWith touchscreen control, Siemens, type Simatic hmiOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgroch ...

General SKU025Y184 LocationBarneveld MakeRobert Bosch No.267 606 Main Features MaterialStainless steel Volume250 Ltr. Motor3 KW Specified Features - Tumbler mixer Tumbler mixercheck Polished insidecheck Capacity250 l. Diameter800 mm Cylindrical length750 mm Inletø 250mm Outletø 90mm With motor3,0 kW 380 V MaterialStainless steel 1.4305 (303) General Year of constructionunknown With switchgear(as is) Floorspace2,8 x 1,0 m Total height2,7 m Weight900 KgPowdered foodsGeneric medicinesTea, herbs & coffeeAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsAPITumbler mixersMinerals & inorganicRobert BoschIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries ...

General SKU316W642 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1872 mm Inlet diameter240 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1872 mm Between inlet and outlet1700 mm Shaft diameter85 mm Pitch200 mm Inletø 240 mm Outletø 295 mm Motor1,1 kW (400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet400 mm With coverscheck MaterialStainless steel 1.4301 (304) General TypeTSE 250/1872 Mach.No.04/3371 Year of construction2004 Floorspace2,90 x 0,40 m Total height0,80 m Weight380 kg Extra Specifications- opening for dust extraction on topOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts &  ...

General SKU345S727 LocationBarneveld MakeBuss-SMS TypeM-2500 No.0020 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature150 °C Main Features MaterialStainless steel Volume2500 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2500 Ltr (bruto 3200 Ltr) Trough sizesdia.1630 x1675mm InletDN300 OutletDN300 With jacket(174 Ltr) Shaft can be heated(60 Ltr) Max. temperature150°C. With mechanical sealcheck Motor30,0 KW, 400/680 Volt Speed mixing shaft1-51 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Year of construction1995 Total height2,8 m Weight± 12.000 kg Extra Specificationsthis Buss-SMS is equipped with a mechanical seal reconditioned by EagleBurgmann- with Fima dust Filter, Type TMF3/1.65, pressure: -1/+1bar, max  ...

General SKU309N504 LocationBarneveld MakeFalk Gmbh&:Co KG No.24320 Material Shell materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell0.49 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface25m2 Tube capacity140 Ltr Number of tubes:64 Tube diameter25,4mm Tube length5000mm Wall thickness tubes1,6mm Max. temperature60 degr.C. Shell capacity317 Ltr Shell diameter356mm Shell length5000mm Max. temperature100 degr.C. Shell connectionsdn65 Cover connections(2x)dn80 General Year of construction2007 Mounted on legscheck Floorspace5,7x0,7 M Total height1,0 M Weight800 KGOils & fatConsumer wastePaints & coating ...

General SKU117Z457 MakeDrais TypeHT-250 No.47294 Year of construction1975 Mounted on framecheck Main Features MaterialStainless steel Volume250 Ltr. Motor18.5 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) Capacity250 Ltr Trough sizesdia. 700x750mm Inspection hatch500x300mm (1x) Outletdia. 120mm With jacketcheck Motor18,5 KW, 380 Volt MaterialStainless steel With jacketcheck General LocationBarneveld With switchgear(as is) Floorspace2,7x1,7 M Total height2,3 M Weight1750 KGPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersDraisIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > ...

General SKU215W151 MakeUnknown, manufacturer plate is missing LocationBarneveld Main Features Motor0.37 KW Length2700 mm Inlet diameter260 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter250 mm Length3500 mm Between inlet and outlet2700 mm Shaft diameter110 mm Pitch125 mm Inletdia. 260 mm Outletdia. 260 mm With jacketcheck With adjustable packing glandscheck Motor0,37 kW 230/400Volt, 1380 rpm Height between in- and outletca. 500 mm MaterialStainless steel With jacketcheck General Floorspace4,4x1,0 m Total height0,7 m Weight900 Kg Extra SpecificationsThis conveyor screw is equipped with a heatable or coolable screw.Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCat ...

General SKU253N349 MakeChaudronnerie ABF LocationBarneveld Pressure Working pressure3.9 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 Ltr Vessel sizes+/- dia.1400x1300mm Dished bottomcheck Dished top sidecheck Manholedia.350mm Top connectionsdia. (6x)120mm, (1x)200mm With jacketcheck Max. temperature20/250degr.C ,-25gr.C/250degr.C With paddle stirrercheck Motor5,5 KW, 230/380 Volt With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4401 (316) General No.K 62 200 Year of construction1992 Mounted on legscheck Floorspace2,0x2,0 MPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersStainless Steel ReactorsOrganicsSolventsDetergen ...

General SKU316W643 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1634 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1634 mm Between inlet and outlet1500 mm Shaft diameter85 mm Pitch200 mm Inletø 230 mm Outletø 290 mm Motor1.1 kW,(400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet500 mm With coverscheck MaterialStainless steel 1.4301 (304) General TypeTSE 250/1634 Mach.No.04/3371 Year of construction2004 Floorspace2,60 x 0,40 m Total height0,90 m Weight320 kg Extra Specifications- opening for dust extraction/filter on topOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatal ...

CNC lathe with driven tools, year 1998, CNC MSC-501. Used machine. More info & price on IndustrialBuyer.

CNC lathe, year 2013, CNC SMART. Used machine. More info & price on IndustrialBuyer.

Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg

Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible.

This 3D printer was manufactured in 2016. The 3DSYSTEMS ProJet 2500 Plus offers high-definition printing modes, HD and UHD, with resolutions up to 1600x900x790 DPI. It supports a substantial print volume and has a robust frame size of 1397x927x1314mm, weighing 325kg. Ideal for detailed and precise printing tasks, the 3DSYSTEMS ProJet 2500 Plus machine we have for sale is a reliable choice for professional use. Contact us for more information.

This 4-axis MORI SEIKI NLX 2500Y was manufactured in 2013. It features a maximum swing over bed of 742 mm and a maximum turning diameter of 366 mm. The machine includes a powerful spindle motor with 18.5 kW and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500Y horizontal turning machine we have for sale. Contact us for further details.

This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details.

Hand spindle press 25to -Passage between the columns 400mm - Spindle diameter 80mm -Height clearance 420mm -Various clamping claws Dimensions: LxWxH 1.2x0.8x2 meters / Weight 700Kg

This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

LMF Compressor 40 bar Capacity 1,600 m3/h CW 250

Inv. Num. : 9233 Type: LUD 500/2500-F1 Producer: ZDAS Created: 1975 Parameters: Compressive force: 500 t Maximum stroke rate upper table: 20 1/min Ram stroke: 315 mm Main motor power: 55 kW