shr 25 used for sale

General SKU390X1018 MakeJaudt LocationBarneveld TypeZS vario 250/300 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotor diameter150 mm Rotor width250 mm Number of locks:5 CapacityCa. 4,9 dm3/h Inletdia. 250 mm Inlet flange sizesdia. 400 mm Outletdia. 250 mm Outlet flange sizesdia. 400 mm Installation height300 mm With motor0,55 kW, 290/500 volt, 1380 rpm Rotor speed13 rpm MaterialStainless steel 1.4571 (316Ti) General No.Unknown Year of construction2009 With switchcheck Floorspace1,25x0,45 m Total height0,30 m Weight100 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicRotating valvesJaudtIndustries >  ...

This IMAC FL 80-2500 press brake was manufactured in 2009. It features a maximum force of 800 kN and a table width of 2500 mm. The distance between uprights is 1990 mm, and it has a throat depth of 280 mm. With a motor power of 7.5 kW and a weight of 5200 kg, consider the opportunity to buy this IMAC FL 80-2500 press brake. Contact us for more information.

General SKU390X1019 MakeJaudt LocationBarneveld TypeZS vario 250/300 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotor with scraperscheck Rotor diameter150 mm Rotor width250 mm Number of locks:5 Lock sizes100x70 mm CapacityCa. 4,9 dm3/h Inletdia. 250 mm Inlet flange sizesdia. 400 mm Outletdia. 250 mm Outlet flange sizesdia. 400 mm Installation height300 mm With motor0,55 kW, 290/500 volt, 1380 rpm Rotor speed13 rpm MaterialStainless steel 1.4571 (316Ti) General No.0424873 Year of construction2012 With switchcheck Floorspace1,25x0,45 m Total height0,30 m Weight95 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMineral ...

This 3-axis measuring machine was manufactured in 2009. The SHIN NIPPON KOKI MM 2500-5012 offers expansive dimensions and capabilities, with an effective distance between columns of 3500mm and axis movements of 5000mm on the x-axis, 2500mm on the y-axis, and 1200mm on the z-axis. It features a maximum feed rate of 10,000 mm/min, supported by AC servo motors, ensuring precise and rapid positioning. The expansive measuring range makes the SHIN NIPPON KOKI MM 2500-5012 machine we have for sale ideal for large-scale precision measurements. For more information on this highly capable machine, please contact us today.

This 3-axis Mitutoyo Quick Scope QS-250Z was manufactured in 2001. It features a measuring range of X=200 mm, Y=250 mm, Z=100 mm, and a maximum travel speed of 80 mm/s. The machine includes a 1/3 CCD color camera and various lighting options, enhancing visibility and precision. Ideal for detailed component analysis, consider the opportunity to buy this Mitutoyo Quick Scope QS-250Z CMM machine. Contact us for more information about this machine.

General SKU390X1031 MakeJaudt TypeZS vario 250/300 No.0424874 Year of construction2012 LocationBarneveld Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotor with scraperscheck Rotor diameter150 mm Rotor width250 mm Number of locks:5 Lock sizes100x70 mm CapacityCa. 4,9 dm3/h Inletdia. 250 mm Inlet flange sizesdia. 400 mm Outletdia. 250 mm Outlet flange sizesdia. 400 mm Installation height300 mm With motor0,55 kW, 290/500 volt, 1380 rpm Rotor speed13 rpm MaterialStainless steel 1.4571 (316Ti) General With switchcheck Floorspace1,25x0,45 m Total height0,30 m Weight95 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMineral ...

This optical measurement machine was manufactured in 2018. The MAHR MahrShaft SCOPE 250 plus features a high-resolution CMOS matrix camera, integrated 21 touchscreen monitor, and a CNC MarEcon control system. It supports a measuring length of 250 mm and can handle workpieces up to 100 mm in diameter and 5 kg in weight. If you are looking to get high-quality measurement capabilities, consider the MAHR MahrShaft SCOPE 250 plus machine we have for sale. Contact us for more information.

This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine.

General SKU390X1038 MakeJaudt LocationBarneveld TypeZS Vario 250/300 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotor with scraperscheck Rotor diameter150 mm Rotor width250 mm Number of locks:5 Lock sizes100x70 mm CapacityCa. 4,9 dm3/h Inletdia. 250 mm Inlet flange sizesdia. 400 mm Outletdia. 250 mm Outlet flange sizesdia. 400 mm Installation height300 mm With motor0,75 kW, 290/500 volt, 1440 rpm Rotor speed18 rpm MaterialStainless steel 1.4571 (316Ti) General No.0413628 Year of construction2009 With switchcheck Floorspace1,25x0,45 m Total height0,30 m Weight95 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMineral ...

This STEINER Projet MJP 2500 Plus was manufactured in 2018. Its a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information.

General SKU390X1035 LocationBarneveld MakeJaudt Main Features MaterialStainless steel Motor0.75 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotor with scraperscheck Rotor diameter150 mm Rotor width250 mm Number of locks:12 Lock sizesa: 10 mm, b: 50 mm, h: ± 45 mm Capacity0,34 Ltr. Inletø 250 mm Inlet flange sizesø 400 mm Outletø 200 mm Outlet flange sizesø 400 mm Installation height300 mm With motor0,75 kW (500V, 1435 rpm) Rotor speed13 rpm Capacity1895 Ltr. / h General Type207-0134.10 Year of construction2007 Floorspace1,20 x 0,40 m Total height0,30 m Weight150 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicRotating valvesJaudtIndustries > ...

This 4-axis KOCH BL 2500 NC select line was manufactured in 2019. Ideal for multi-spindle drilling, this machine ensures precision and efficiency in your production line. Consider the opportunity to buy this KOCH BL 2500 NC select line multi-spindle drilling machine. Contact us for more information.

General SKU390X1050 MakeZeppelin LocationBarneveld CEcheck TypeHDS 250/10 AC/SS/AC G Main Features MaterialStainless steel Motor0.75 KW Specified Features - Rotating valve Rotary valvecheck With hopper0,5 m3 With motor0,75 kW, 290/500 volt, 1440 rpm Rotor speed30 rpm MaterialStainless steel General No.83864 Year of construction2021 Mounted on framecheck Extra SpecificationsDesign pressure 3,5 bar, volume size 10,0 l., bulk density 680 kg/m3, design temperature 30Powdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicRotating valvesZeppelinIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine ...

This TTN 400 250 was manufactured in 2012. It features an XY table for product positioning and an electronic shuttle for 6-color printing. The machine includes a 4-color inkwell and multiple cups for versatile printing options. Ideal for those looking to enhance their printing capabilities. Contact us for more information.

General SKU390X1053 LocationBarneveld MakeJaudt TypeZS vario 250/300 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter400 mm Specified Features - Rotating valve Rotary valvecheck Rotor diameter150 mm Rotor width250 mm Number of locks:5 Lock sizesa: 100 mm, b: 20 mm, h: 30 mm Capacity0,45 Ltr. Inletø 250 mm Inlet flange sizesø 400 mm Outletø 200 mm Outlet flange sizesø 400 mm Installation height300 mm With motor0,55 kW 290/500 V 1380 rpm Rotor speed13 rpm Capacity1053 Ltr./h MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.0424871 Year of construction2012 Floorspace1,25x0,45 m Total height0,30 m Weight95 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals  ...

This EMAG EMAG VL5 i DSL vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.

3D printer manufactured in 2021. This 3D SYSTEMS Projet 2500 Plus is equipped with essential features like 3D Sprint Basic for streamlined operation and a VisiJet M2R-CL Starter Kit for clear plastic prints. With only 10 working hours, its practically new. Its MJP EasyClean System ensures hassle-free maintenance, and the ProJet Finisher guarantees professional finishing. If you seek reliability and quality, buy this ProJet 2500 Plus 3D printer. For further details, contact us.

table diameter: 600 mm table load: 250 Kg swivelling range: 0 - 135 Grad turning speeds: 0,03 - 2,0 U/min connected load frequency: 400 V weight: 0,4 t Dimensions (LxWxH): 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313

General SKU388X981 MakeSeitz-werke LocationBarneveld TypeDB250/AFW Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume250 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity275 l. (250l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN700 Top connectionscheck OutletDN30 With jacketvolume 46 l. Max. temperature150°C With propellor stirrercheck Motor0,55 kW, 220-242/380-420 volt, 1385 rpm, (Ex) Speed mixing shaft466 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General No.1955 Year of construction1971 Mounted on legsand wheels Floorspace0,80x1,00 m Total height2,30 n Weight350 kg Extra SpecificationsWith John Crane thermosyphon vessel, volume 5 l.Oils & fatPaints & coatingsPowdered foodsGeneric medic ...

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

I am selling ablender EKOMEX ML 250. Very good condition. Year of manufacture 2015. Two mixing arms with T-paddles Programmable control Smooth mixing speed regulation Emptying into the trolleys Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Price negotiable

Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

General SKU390X1040 MakeAPI Schmidt-Bretten LocationBarneveld CEcheck TypeSigmawig ST30 TDL Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface7.6 m2 Size length995 mm Sizes width450 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface7.6 Capacity15,8 + 16,6 l. Number of platens24 Plate sizes450 x 995 mm ConnectionsDN100 Max. temperature5 / 250 °C MaterialStainless steel 1.4404 (316L) General No.PW-00520 Year of construction2014 Floorspace0,55x0,65 m Total height1,20 m Weight800 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairy ...

Centrifugal pump, diesel fuel Pressure 6 bar, Pump capacity 200 m3/h el.mootor Siemens 55 kw , 2940 rpm , 100 A 6 pcs.

General SKU390X1021 MakeSchmidt TypeSigmawig ST 12 VDN No.08V000422 Year of construction2008 LocationBarneveld Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length348.5 mm Sizes width197.5 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface8,7 m2 Capacity8,912 l. Number of platens64 Plate sizes197,5x348,5 mm ConnectionsDN50 Max. temperature20-180°C MaterialStainless steel 1.4404 (316L) General Floorspace0,213x0,40 m Total height0,770 m Weight161 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal f ...

KRAZ 255 V1A, 1989 model year, 176 kW, diesel. OPTIONAL EQUIPMENT: FORESTER 2012TH HYDRAULIC LIFT. Registration in the EU, number, registration certificate.

General SKU390X1007 MakeSchmidt-Bretten GmbH LocationBarneveld CEcheck TypeST12-PF-03884 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length1035 mm Sizes width335 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface8.7 m2 Capacity8,91/8,64 l. Number of platens64 ConnectionsDN50 Max. temperature250°C MaterialStainless steel 1.4404 (316L) General No.17V007820 Year of construction2017 Mounted on framecheck Floorspace0,335x0,686 m Total height1.035 m Weight332 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnima ...

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Hammer Mills MaterialMild steel General Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Technical specs Extra informationOutput: 200 x 900 mmConsumer wasteCatalysts & fillersFeed additivesHammer MillsOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicAubemaIndustries > Recycling > Consumer wasteIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesMills > Hammer Mills ...

General SKU390X1003 MakeAPI Schmidt-Bretten LocationBarneveld CEcheck TypeSigmawig ST12-PF 1148 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface8.7 m2 Capacity8,45 / 8,71 l. Number of platens64 ConnectionsDN50 Max. temperature0°C/+200°C MaterialStainless steel 1.4404 General No.08V000423 Year of construction2008 Floorspace0,35x0,35 m Total height0,70 m Weight160 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverages ...

General SKU390X1039 LocationBarneveld CEcheck MakeSchmidt-Bretten GmbH TypeST12-PF 2654 Pressure Working pressure25 Bar Main Features MaterialStainless steel Size length650 mm Sizes width300 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Capacity2,06 / 2,33 Ltr. Plate sizes300x600 mm ConnectionsDN50 Max. temperature5 / 250 °C MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General No.07V002072 Year of construction2007 Floorspace0,36 x 0,25 m Total height0,80 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfe ...

Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26 ...

General SKU390X997 MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 No.12V002702 LocationBarneveld Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.3 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,3 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 General Floorspace0,34 x 0,45 m Total height0,78 m Weight250 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal fe ...

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

General SKU390X1056 MakeTenez/ Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 (316L) General No.17V007270 Year of construction2017 Floorspace0,335x0,45 m Total height0,79 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSuga ...

Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.

General SKU390X1048 MakeTenez / Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 With jacketcheck General No.10V000138 Year of construction2010 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubrican ...

Letterpress Type: HK 250 Manufacturer: Hikari Unwind x 6 UV leterpres print unit, Ist UV dryer Punch air unir Flat diecut unir Slittinfg unit x2 rewind unir (revolver) Label counter Machine in good condition, fully funcrional Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU390X1043 MakeTenez / Schmidt LocationBarneveld TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 General No.12V002703 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOt ...

This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information.

General SKU390X1030 MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 No.12V002703 Year of construction2012 LocationBarneveld Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 General Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAn ...

General SKU390X1026 MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 No.12V002704 Year of construction2012 LocationBarneveld Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 (316L) General Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDa ...

General SKU390X1027 MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 No.10V000139 Year of construction2010 LocationBarneveld Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 General Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsPlate heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants &  ...

General SKUR1179 MakeEstrella Ag (CH) LocationBarneveld Type2500 Ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume2500 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2660 Ltr (2500 Ltr nett) Vessel sizesdia. 1365x1650mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connectionsDN100 (4x) DN200 (1x) OutletDN100 Max. temperature-10/200 degr. C With jacket(152 ltr) Max. temperature-10/200 degr. C With propellor stirrercheck Motor1 kW 220/380 Volt (Ex) With jacketcheck Pressure vessels Closed vertical tankcheck Capacity2660 Ltr (2500 Ltr nett) Dished topcheck Dished bottomcheck With jacketcheck With propellor stirrercheck Motorcheck Specified Features - Pressure vessel MaterialGlass General No.89680 Year of construction1992 Floorspace2,1x2 ...

General SKU201S008 MakeNivoba (NL) TypeFS 250-32L No.1988-09135 Year of construction2007 LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Surface32 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface32 m2 Drum sizesdia 2500x4050mm Motor2,2 kW 220-240/380-415 volt Drum speed0,3-3 rpm With stirrercheck Motor3 kW 230/415 volt With knife dischargecheck Mechanical operatedcheck Motor0,12 kW 220-240/380-45 volt With vacuum pumpSpeck Pumpen (3x) typeVH0800-41-30-009 (1x), ASK6501-13-60003 (2x) Motor30 kW 300/690 volt, 7,5 kW 400/690 volt With liquid pumpcheck Motor4 kW 400/690 volt MaterialStainless steel 1.4301 (304) General With switchgear(as is) Floorspace5,7x3,5 M Total height3,1 M Weight12000 Kg CEcheck Technical specs Extra information.Powdered foodsStarchBiotechnologyAgrochemicalsSpicesPlastic & p ...

USED TETRA PAK TBA 19 250ML EDGE FILLING LINE FOR SALE YEAR 2009 Item #: Usm-217 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 250ml edge Filling line for sale. 1-TBA 19 250ml edge filling machine, version 30v, year 2009, working hour 35000 2-Cap Applicator 30, Cap Flex 30, Year of manufacturing 2017, Working Hours 17000 3-Maak Packer Turner 4-Tetra Pak Easy ride and conveyors control system 5-paper trolly and conveyors Condition: excellent condition and still on production.

USED TETRA PAK TBA 19 250ML BASE 30v FILLING LINE FOR SALE Item #: Usm-234 Category Tetra Pak TBA 19 One used Tetra Pak tba 19 250ml base filling line for sale. 1-TBA 19 250ml Base filling line, year of manufacturing 2007, Version 30v, working hours 11900 2-Straw applicator tsa 21 3-tetra pal shrink tts 51 4-20m Tetra Pak conveyors and easy ride 5-Paper trolly Condition: Good

USED TETRA PAK TB 19 250ML BASE 20V FILLING LINE FOR SALE Item #: Usm-235 Category Tetra Pak TBA 19 Used TB 19 250ml Base Filling Line available for sale 1-TB 19 250ml Base Filling Machine, Year 2003, Version 20v, Non Aseptic 2-Straw applicator TSA 21 3-Easy ride and conveyors 4-Shrink TTS 51 Paper trolly and spare parts

USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 Item #: Usm-240 Category Tetra Pak TBA 19 USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 TBA 19 250ml Slim Filling Machine, Year of manufacturing 2003, Version 10v, With ASU Straw Applicator TSA 21 Multi Shrink 65 Conveyors and Paper Trolly Condition: Refurbished and Test Run Approved. Excellent Condition.

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - .ucymachines/ Contact us at - sales@ucymachines