shr 25 used for sale

Part number 7961 SPECIFICATIONS - track width 250mm - shaft width 250mm - max blade diameter 350mm - blade bore diameter 70mm - max cutting height 100mm - Table top width with a clearance of 940mm - table top length 1700mm -in advance: - Ratchets/Fluffers - pressure roller, metal, smooth - shaft with saws - pressure roller, metal, smooth 2pcs -from the bottom: - Guide - Ratchets/Fluffers - Slip roller, smooth - Caterpillar - central lubrication - 4kW feed motor - main motor 37kW - infinitely variable feed speed regulation - manual body lifting - manual lifting of the shaft with saws - Diameter of the extraction port 200mm - overall dimensions of the machine 1800x1500x1700mm - weight 1956kg ADVANTAGES – German production – smooth feed speed regulation – used multi-saw, very good condition Net price: 22900 PLN Net price: 5452 EUR depending o ...

Part number 7959 SPECIFICATIONS - track width 250mm - shaft width 250mm - max blade diameter for a multi-saw 350mm - blade bore diameter 70mm - max cutting height for a multi-saw 120mm - Table top width with ground clearance 830mm - table top length 1780mm – in advance: - Flingers - roller, compression sliding, metal, smooth - Flingers - pressure roller, sliding - shaft with saws - pressure roller, slipper, metal 2pcs – from below: - guide strip - Flingers - Caterpillar - Electric up/down adjustment of the body - manual adjustment of the shaft with saws - central lubrication - infinitely variable feed speed regulation - 1.1kW feed motor - main motor 37kW - Diameter of the extraction port 170mm - overall dimensions l/w/h 2000x1500x2000mm - weight 1850kg ADVANTAGES – German production – used multi-saw, very good condition Net price: 45900 PL ...

PART NUMBER 7751 SPECIFICATIONS - track width 250mm - shaft working width 250mm - max blade diameter 300mm - blade hole diameter 60mm - max cutting height 100mm - Table top width with widening 520mm - table top length 1580mm in advance: - 2 rows pawls - Slip roller, metal, pressure roller - shaft with saws - Smooth, metal, sliding roller from below: - Sliding roller - guide strip - latches - Caterpillar - central track lubrication - infinitely variable feed speed regulation - feed motor 0.75kW - main motor 15kW - Diameter of the extraction port 200mm - overall dimensions l/w/h 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian production – very good condition – used multi-saw Net price: 32900 PLN Net price: 7834 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Machine dimensions: 1300/640/H1115 mm -Weight: 344 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Machine dimensions: 1300/640/H1115 mm -Weight: 344 kg

electric motor, three-phase motor -Manufacturer: Weg, electric motor type W20-250S/M-04 -Power: 55 kW -Speed: 1485 rpm -Shaft: Ø 65 x 135 mm -Design: B3 -Protection rating: IP55 -Quantity: 1 electric motor available -Price: per piece -Dimensions: 920/920/H505 mm -Weight: 422 kg

BOMAR Ergonomic 320.250 G metal band saw was built in 2011 in the Czech Republic by BOMAR, spol. s r.o. The machine is designed for precise cutting of workpieces at an angle of 0°, +45° and +60°. The machining is performed by a robust saw blade driven by an electric motor with worm gear, which operates in an oil bath. In order to ensure precise guidance of the saw blade, it is mounted in tapered roller bearings with pre-clamping. Secure clamping of the workpiece during cutting is ensured, in turn, by a quick-clamping vice. The BOMAR Ergonomic 320.250 G is distinguished by its extremely stable design based on a robust arm, which is raised manually and lowered under its own weight. The arm’s descending speed is adjustable via a hydraulic cylinder with flow valve. The combination of high cutting precision with simple operation and reliable components makes the Ergonomic 320.250 G ba ...

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

New and unused 2019 generator set with 0 running hours.; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 935 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 250 , Generator Hz: 50 , Generator Volts: 380/440 , Generator Amps: 380/328 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6932, , = More information =, , Empty weight: 6.500 kg, Type number: B600B Generator 250 KVA

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Warranty:, 1 year for continuous use, 2 years for standby use; Gross weight [kg]: 12350; Engine: Cummins QSK50-G17; Accessories: Battery, Control Panel, Including heater and battery charger

; Gross weight [kg]: 1750; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolat heater and battery charger; Water Tank Volume [l]: 200

Cooling system: Heat exchanger cooled; Gross weight [kg]: 1966; Engine: Cummins 6LTAA8.9-GM200; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 279 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 255 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 354 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6969, , = More information =, , Empty weight: 4.500 kg, Type number: MF/280/DD GENERATOR 255 KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 186 Kw, Rated Speed: 2300 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-bf6m1013-25t3r-new/1 84, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: BF6M1013-25T3R; Transport weight [kg]: 735

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

Automatic Transfer Switch - ATS Panel - ATI Panel, 250 Ampere - Applicable for generators up to 175 kVA; Gross weight [kg]: 75

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

; Gross weight [kg]: 14470; Engine: Caterpillar 3516B; Accessories: Control Panel, Caterpillar 3516B Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel

2013 SEPARFLEX 250 A Automatic water separator Find more here - .ucymachines/ Contact us at - sales@ucymachines

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

; Gross weight [kg]: 652

Flywheel size: SAE1/14, Mecc Alte ECO38-1L/4C, DER1 voltage regulator, 300kVA continuous / 330kVA stand-by power; Gross weight [kg]: 771

Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers

; Power [PS]: 170; Gross weight [kg]: 2750; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

Drive: . kW Capacity: . kg/h material: . 6 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344

Weight kg, 2450

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

Specifications: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Stroke: 200 mm Projection : 420 mm Crowning Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1-set AMADA standard tool The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

New COSMOS 250 emulsifier reactor, manufactured by COMQUIMA in 2026. Stainless steel skid, AISI 316 on all parts in contact with the product, and with a useful capacity of 250 liters. It consists of a jacketed reactor and an agitation system with scrapers and homogenization: AGITATION: FULLVISC laminar displacement system with scrapers. Exclusive 3-arm design with scrapers. Rated speed of 40 rpm and power of 4 kW. HOMOGENIZATION: M.X.O.N. 120 High Shear Emulsifier. Mechanical seal with safety seal. Rated speed of 2,900 rpm and power of 5.5 kW. Designed to centralize the manufacture of fine emulsions, suspensions and high viscosity products in a single piece of equipment, easily manageable through pallet truck or toro. It allows products to be processed up to 70,000 cps and a particle size of 10 μm can be achieved. The unit is controlled by an integrated control  ...

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1460

ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 250 mm -Bolt circle: Ø 225 mm -Passage: Ø 76 mm -Dimensions: Ø 250 x 110 mm -Weight: 25 kg

2019 Šmeral/ Pressmont LKT 250 D Crank draw press Type: LKT 250 D Manufacturer: Šmeral/ Pressmont Overhaul: 2019 Nominal force 2500 kN Working path 12.5 mm Ram stroke 250 mm Number of strokes 20 min-1 Usable number of strokes 12 min-1 Shut high 750 mm Adjustment of ram 100 mm Passage under guidance 1600 mm Ram working surface 1380 x 850 mm Table working surface 1575 x 1150 mm Table top thickness 130 mm Power of the main electric motor 30 kW The speed of the main electric motor is 1445 rpm The power of the electric motor for adjustment is 2.2 kW Speed ​​of the electric adjustment motor 1440 rpm Press width 2980 mm Press depth 1500 mm Press height 4615 mm Weight 27,000 kg Included feeder, straightener and decoiler Condition of new machine. Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC lathe DMG MORI NLX 2500 SY/700 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of manufacture: 10/2017 Commissioning: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 4500 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Workpiece Conveyors , Workpiece Unloaders Tool presetter manual ( HS ) Removable tool presetter ( GS ) 3 Jaw Chuck Hydraulic Kitagawa BB 210 with Foot Pedal (HS) 3 jaw chuck hydraulic Kitagawa B 208 with foot pedal (GS) IRCO BREUNING ILS Bar Feeder - muk Various tool holders 0 40 mm Direct displacement measuring system X, Y, Z axis Signal lamp 4 ...

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons